Nice to see you enjoying the car. Your demeanor is so much different. You are having fun with the car, and that is great to see.
@carmob74993 жыл бұрын
Nice Job it turned out great ..
@Was-here23 жыл бұрын
You have my approval
@jayson_inthe_5oh3 жыл бұрын
looks fresh bro
@1of1RTR3 жыл бұрын
Looks good 🤙 🇺🇸
@DiablitoSpeedz3 жыл бұрын
Nice !!
@videomaniac1083 жыл бұрын
I would do a high power run over a known distance or time with the stock grille and then with the grill removed and compare the IATs over ambient to see how restrictive the grill really is and if it's worth removing or cutting up.
@donwon74843 жыл бұрын
Looks good 👍🏽👍🏽👍🏽
@joshodin193 жыл бұрын
Looks good to me! I looked at the roush lower, but haven't pulled the trigger.
@11B_GRUNT3 жыл бұрын
I don't know battle, I like the lower delete you done, but I liked the upper the way it was factory. Jmo lol, still can't wait to see it on the track man
@b17f163 жыл бұрын
Zander , you have a killer car! you dont need to cut this and mess with that, leave well alone, its going to end up a RICER!
@Zander13Productions3 жыл бұрын
I don’t have killer chiller. Just an ice box
@b17f163 жыл бұрын
@@Zander13Productions lol 👍
@shaner12003 жыл бұрын
looks good but yes you need the mesh on the lower not only to keep the flow of the look of the upper but to help protect the lower section of intercooler from debris and possible damage. Great job for 1st time.
@Alex-cj8hh3 жыл бұрын
GT500 front end swap a possibility? retrofit source headlights? aftermarket low and high beams?
@primofx2sport3 жыл бұрын
Should have saved money and cut the top as well. Also you should cut the bottom from the back end to avoid those tabs from showing.
@moddedgt35063 жыл бұрын
We should race! Very good video btw! I own a GT350, it is running 753 Whp . It is equipped with a vortech supercharger, and many other mods.
@chadoliver29663 жыл бұрын
Zander it looks good. And I agree you should add some mesh for the bottom grill to finish off the look to make it all look uniform.
@paulhudgins51203 жыл бұрын
Great job, looks great the way it is, don't change anything, except a liite red paint on that sweet looking hood.
@5.0beers703 жыл бұрын
Looks good 👍
@trbstang3 жыл бұрын
Looks great Alex! Good job for the first time working on it.
@stepside28393 жыл бұрын
🧐more bugs👀for the “bugged up” heat exchanger Question: -> what is the optimum flow rate for heat dissipation ……… pump size vs coolant capacity 🤔
@whitehorse13 жыл бұрын
Painting the heat exchanger black would probably make it retain some of the heat. It might even make things a little hotter to begin with.
@Jack-b5o6r3 жыл бұрын
🔥🔥🔥
@Alex-cc3ol3 жыл бұрын
Why not to install cervinis lower grill?
@Jessieofhearts3 жыл бұрын
Literally just passed you in a Jeep Grand Cherokee.
@DWH3003 жыл бұрын
I think it will have a more finished look adding the mesh. I feel painting or wrapping your GT350 hood in red will look more factory since it appears that's the direction your heading with your Stangs look of course excluding the Predator and all the other go fast mods. I'm still amazed how far you've taken your Mustang. Great job Zander!
@craigc91813 жыл бұрын
Sawsall!
@dogsubx23 жыл бұрын
Looks good brother! Need to get a new rear seat delete. No more turbskies!
@thomasl61583 жыл бұрын
Custom Car grilles actually sell the bottom wire mesh piece too.
@tlcgtp3 жыл бұрын
Good to see you back making steady content again Alex! Car’s looking spicy for sure...any thoughts on wrapping that hood race red? I agree the lower needs matching mesh to finish it off...well done sir! Cheers
@tannermalloch54063 жыл бұрын
Throw in some clips ripping the 4 wheeler
@racingfox81693 жыл бұрын
Can’t anyone count how many times Zander13 has removed his front bumper? 😂😂😂, The love all the mods bro!, It would be a funny T Shirt logo 😎👊🏁
@AtticAZ3 жыл бұрын
If you painted the heat exchanger, I would only do the top portion, since it shows partially in the larger opening. It will look more classy, IMO. I’d let it show in the lower portion.
@mannyomega7132 жыл бұрын
i want that hood
@TheWonkax3 жыл бұрын
looks good Zander! I'll be slightly modifying my 350 retrofit bumper for my 16 GT soon. Looking for more air flow as well
@mrs.zander1343 жыл бұрын
🔥🔥💪🏼💪🏼💪🏼🔥🔥
@RMBerry33 жыл бұрын
Seat covers off? Looks good, need something to protect from debris so you don’t puncture the inner cooler
@jameshows54193 жыл бұрын
Looks Great 👍. You said you liked the openness of my Roush on the bottom. Your upper grill is way less restrictive than mine . Loved the Video thanks for the post . I ordered my DSS half shafts yesterday afternoon. I’m looking forward to being able to go to the track before to long . J
@jaredhobbs10723 жыл бұрын
LOOKS GOOD, YOU HAD A RTR GRILL JUST LIKE IT THOUGH
@RichieRich9802153 жыл бұрын
Alex, are you going to wrap the new Carbon Fibre Hood in Race Red?
@anti0illuminati072 жыл бұрын
Did you face any surging, hiccups due to opened grille sort of thing? My car runs ugly and I couldn't get the car steady on sweep Rev! I've got Odin with cirvinie with some other goodies
@Zander13Productions2 жыл бұрын
Yes. I ended up getting MAF surge. I fixed it with a piece of cardboard in the intake box blocking some of the airflow. It didn’t hurt performance which was good
@anti0illuminati072 жыл бұрын
@@Zander13Productions appreciate your reply sir, I'm guessing that you have blocked the snorkel from the inside where the air cone sits completely or partially? When I made my air box closed even from the top I started getting the P0111 and sometimes P2119! I thought it's more of tuning related since the P061A would pop up suddenly but I might take this seriously and try to make the car read more of happy MAF without any turbulence. Always informative and helpful to all platforms. Keep up the good work.
@Drizzle70103 жыл бұрын
Where is the time slip?
@Zander13Productions3 жыл бұрын
Have not been to track yet
@elenacarino93463 жыл бұрын
Love the look, Bro!🙌🏻 Can’t wait for your next updates!✌🏻
@bigmosesmedia3 жыл бұрын
I would not put any paint on that intercooler. Hey next time you have that front clip off consider putting on a tow hook. Check out the ZL1 Add Ons hook. Keep up the good work my friend the car is tits and ass.
@MichaelMiller-ci3kg3 жыл бұрын
Looks great brother. Much steadier hands than me lol
@frostbtn Жыл бұрын
where is the tool from
@victorxavier99773 жыл бұрын
💯🤘👍
@Jack-b5o6r3 жыл бұрын
Would of be easier to control the cut with a router bit … I’ve done similar things to remove plastic … great job for a first time
@Mike_gil24233 жыл бұрын
What springs does she sit on?
@brianmartin22373 жыл бұрын
I got my mesh from Custom Car grills. I cut my upper and lower grill myself and installed the mess. I also took the same mesh and installed on my Shelby American Super Snake hood to match. www.customcargrills.com
@Zander13Productions3 жыл бұрын
💪💪💪
@stevmstng51653 жыл бұрын
☑️
@think1stproductions3 жыл бұрын
🤔🚗💨💯💪🌮👊
@mustangfan24533 жыл бұрын
👀👀👀
@randomcol13783 жыл бұрын
Looks good, don't paint the intercooler black, black absorbers heat where as silver reflects heat .