[CVtv] Episode 3: Alternating Gyre Mode

[@kahner7]

Awsome.. I was really hoping this was possible and was wondering y nobody was doing it. I'm getting mine tomorrow. Can't wait!

[@kengeroo]

so essentially you're splitting the potential water pushing power of the gyre from 100 % in one direction,,, to approx 50% water pushing/pulling power to both directions.

[@S2minute]

If i bought 2 and placed them horizontally at each end of my 6' tank, will i should be able to just have them function at alt time so one comes on for a min, turns off then the other turns on? Additionally, would i be able to setup the two where as one would push water forward while the other is in reverse then after a min or 2 have them switch roles? Hoping to better create wave surge in this respect. Also, is there a nighttime mode that allows the pumps to tone down flow speed automatically?Thanks.

[@Luciddv]

Is there any way of controlling the Gyre with an Apex, or Reefkeeper system? Or any plans for an interface in the future?

[@CoralVueTV]

Currently there is not a way to control the Gyre pump by controllers such as the Apex but we do plan on having an advanced controller available later this year.

[@Luciddv]

Also, is there any way to run 2 Gyre's together in an an alternating mode, like you would with the "other" controllable wavemakers?

[@CoralVueTV]

The simple controller that currently comes with the Gyre does not allow for slave and master type setups. The advanced controller will allow such a function when it becomes available.

[@samiam9059]

Problem I have is on the low speeds it hangs up. So just keep it higher for now.

[@aldwindj]

Can you use a basic plug in timer to Turn the gyre ON and OFF so that it can mimic a night and day water flow?

[@CoralVueTV]

Sure can.

[@johnlukacs390]

Is your name Carlos

[@richardnegron9728]

please someone connect me to help