Cyberpunk 2077 2.0 BEST Settings for FPS & Quality (In-Depth Optimization Guide)

[@sydhamelin1265]

RESULTS: Ok, as I said below, I was already close to these settings, but I changed everything accordingly to match exactly - except my FOV is on 80, and my sharpness is on 75 (which I actually moved up from 50). The result was that YES, I did get an FPS boost, probably between 5-10, enough to notice in dense areas. As for how the game looks - it actually looks BETTER than it did before. So, with these adjustments, both the look and performance improved. It's all about knowing which settings give you the most bang for the buck, and adjusting accordingly. I really thought I had it locked in, but these recommendations gave me a notable improvement all around. Thank you!!!

[@grayless8887]

does FOV alter framerate?

[@sydhamelin1265]

@@grayless8887 Yes, in my experience a wider FOV means a lower framerate, since more is being rendered onscreen.

[@wockymocky3691]

Yes, especially if you ultrawide monitor like me 😭😭

[@Mo_isAFK]

Thank you so much, went from 60 to 100+ fps after these settings with quality staying pretty much the same

[@The.Isadorable]

You explained how a lot of these settings work in such a clear and understandable way that really demystified how things work for me. Thank you

[@s8r4]

The correct settings literally make or break the game in my opinion, its amazing how well it looks and plays after following your recommendations, I'd argue it even looks better than just using the stock high / ultra preset, was really sleeping on the dlss sharpness slider. Thank you :)

[@grayden4138]

Running a Core i5-12600K - 32gb RAM - Gigabyte RTX 4070 12GB card with 1440 monitor. Ran with the exact same settings recommended in the video. Benchmark ended up at 166 FPS average.

[@henrik_lamar]

Well then I'd probably higher up the settings, because many of them actually impact the visuals by a lot. And in cyberpunk it is absolutely okay to run the game with just 120 fps or so

[@TheDarkLordKronen]

Dude, THANK YOU!! I run a Ryzen 7 5800x and RTX 3080 and these settings keep me at 100-120 in most cases, between 80-90 on the lower side. so much better now, I was having some issues with streaming it to twitch, those issues are now gone. YOU'RE A HERO CHOOM

[@TheDarkLordKronen]

For reference, before I was getting 45-60, sometimes even in the 30s, especially in Dog Town, so sitting over 100 without issues is game changing, staying around 90 even with RT reflections on : )

[@TheSlyDragon93]

@@TheDarkLordKronenwhat’s your settings dude I got the same setup except cpu is 1 gen below ryzen7 3700

[@lifehound5629]

Update 2.1 reduced my performance by 60%. Going default helped a little bit this video made it run like butter. Thank you!

[@BlackyMox]

Okay... i was wondering. Played on 2.0 and was amazed i ran around 80 FPS and at a stable 58-60 no matter what. came back on 2.12 and i am down to 45-55 in city, and while combat or in high density areas i drop to even 30, no changes what so ever.

[@Vestu]

Same, the game is near unplayable now. I have RTX 3090

[@Raven.Bloodrot]

I'm getting 60 fps stable max settings with RT off with a 2070 SUPER so this seems like a non-issue.

[@Teoga2]

​@@Vestui have rtx 3060 ti and 80 to 100 at everything Max but Ray traicing on high

[@Vestu]

@@Teoga2 Okay maybe I'll have to try the game again. It could be some single setting that's now ruining mine.

[@cfriedalek]

I've got an i9900k & RTX 3060Ti on a 4K native screen (42" Sony TV). Was getting 55 FPS with recommended settings, RTX off & DLSS Performance. Went through your guide and now getting 66 FPS with DLSS Quality and RTX off (38 FPS with RTX on). Very nice improvement in FPS and image quality. Thanks for posting this guide. Cheers.

[@popolives]

My god. Who the hell plays 4K native on a 3060ti. Damn

[@aaronlevy1262]

Absolutely best video. Went from 33fps avg to 98 in bench before and after. Game still looks incredible.

[@VictorKDurand]

wow okay ! Thank a bunch for the video. As for my end of the bargain, I went from around 60-80 to 110-125 fps, with believe it or not better visuals in some areas, because I had some settings tuned lower than what you suggested. My CPU is intel 13600K (running at base speeds) and RTX 3070 (8GB, modestly OC'ed). Cheers !

[@GretarBaldvinsson]

Amazing. I have always had issues with Cyberpunk 2077 graphics. No matter how I tweaked it it looked newer impressive. But after changing the settings according to your recommendation, I was blown away by the improvement in graphics. This has been one of the most important KZbin videos I have ever watched. Thanks a million.

[@dribrom]

If you're not playing in a competitive FPS tournament frame rates is not that important, especially in a single player game. It's allot more important to get a stable frame rats. You will feel like it lagging if the frame rate bouncing all over the place even if it's between 60 and 120. Some times it's better to cap the frame rate at a lower Hz than try to get as high number as possible.

[@thebonelesskeleton]

if you have a pc like his than yeah but i think this helps lower ends pc more, for example my pc goes from around 55 fps to around 75

[@doomslayer8985]

for shooter games your priority is to target as many fps as possible but for AAA singleplayer games at the very least 60fps and you are good to go

[@InternetStudiesGuy]

It's about responsiveness of the game. Mouse input translating into things happening on the screen. Even if you have nvidia reflex on, it will take at least 2 engine frames to change anything on the screen starting with the mouse input, that's 30ms. If you run at 144hz it's closer to 10ms. The game feels more responsive, and you the player feel more immersed. Always aim for more than 60fps. You can get away with much less in something like a slow paced strategy game, but fast shooty action? Aim for 100 at the very least. It feels much better to play.

[@dribrom]

@@InternetStudiesGuy It's that the AI is too stupid for you to need to be that good in a single player game. Also most players are not skilled enough to even be able to take advantage of that fact. But the higher resolution and the bigger your screen is the higher hertz you need. However If you play on a laptop with a 17" screen, 4k resolution is a total waist of processing power. You need at least 45" or even 50" before 4k at 120 Hz is required. The human eye can't see the difference between 1080p and 2160p on a small screen anyway.

[@gmodiscool14]

i need fps for immersion cuz i got some sort of mental disorder

[@damianboot]

Thank you Sir! Went from 55 to 82 FPS averages on the in game benchmark. Running a 3060 (12G) on a Ryzen 7 5800X at 1440p. Much appreciated.

[@jimehbb]

This worked great for me. I'm running a RTX 3070 / I5-13600k combo at 1440p and was averaging 61 fps on the benchmark with my ill considered and badly understood config. Following your settings albeit with contact shadows off I'm now getting 119 fps average, with a lowest of 89, and the experience is great in terms of graphics quality and immersion. So glad to get this nailed just as I'm getting back to the game to experience phantom liberty. Fine work sir, you have another subscriber.

[@Sh0a1bSaj1d]

How did you get 120 fps?? I am getting around average fps 44 even after doing all the settings in the vid , I have a Rtx 3050Ti and i5-11400H cpu .. any help?

[@yousefalsamiri4502]

@@Sh0a1bSaj1dthe rtx3050 is miles weaker than the rtx3070

[@minhbui990]

​@@Sh0a1bSaj1d you have the laptop variant of the 3050 which is as fast as like a 1660ti which is 200 times slower than a 3070

[@Games_canbe_funny]

I have rtx 3070, 240 hz display with I7 processor, why the hell I am getting 40, 45 fps, I haven't changed settings yet, still using stock ultra

[@jimehbb]

@@Games_canbe_funny I was getting ~60 after tweaking ultra settings, but got about the same with stock ultra and rt. Hope you've tried out the settings in this vid and you're way over 100 now.

[@Bags1809]

came back to this video after the newest update reverted my settings, glad to say this is still update to date, all i changed was adding the new AMD Super resolution 3 and turned on the new FSR frame generation. went from 110~fps, stuttering, pixelated mess, to 180+ beautiful game. 10/10 video

[@Grimmjow19872]

Oh really?

[@Shaliber0623]

I thank KZbin algorithm for recommending this video. By following this video my FPS went from 65-70fps to now 125-135 fps. Since I didn't fiddle much around with settings when I reinstalled Cyberpunk I just went with the high settings preset with a couple of tweaks like motion blur off etc and it did not turn on DLSS and I was only getting that 65-75fps while at the city now I have stable 125-135 fps sometimes reaching my max 144fps which feel awesome in combat and exploration.

[@mike_n_ike2578]

Amazing video dude! I've struggled to find that quality/fps sweet spot since this game came out, but these settings were perfect. I'm on a 3060, and went from running 40-50 frames in crowds and I'd hit 60 at best normally, to 90-100 normally, and 70-80 in crowds.

[@shashwatmali3640]

Bruh

[@mike_n_ike2578]

elaborate?@@shashwatmali3640

[@dima97]

WTF is wrong with my pc?? I have 3080 ti and can barley get 40 to 50 fps in the city. 70 in the badlands.

[@hyperionmetalcore]

@@dima97 Depends on your cpu. And hes probably playing at 1080p.

[@dima97]

@@hyperionmetalcore I mean I have 5600 x ryzen cpu so it's pretty decent. I was also playing 1080p too

[@ivanosalvatore2032]

The explanation is very clear...sometimes it's not the graphics card that's wrong but the game setting. Thanks for your commitment.

[@owemyka9907]

I rarely leave comments on videos, but this just made my game go from ~30 fps to ~60 in dogtown's stadium ! Thank you so much !

[@dogwaterarg]

went from 60 on average to 110 with the quality staying around the same, incredible and definately earned a like

[@ConnectionProblem]

Great video, i do not leave comments often but you sir are a hero

[@pasijack]

About the setting "crowd density", it has a very large impact on fps, cause I tested it out with a config, where all NPC's and cars got removed and I got more fps, a lot more... and no stuttering

[@void-master9077]

So the trade off is either a beautiful ghost town, or an ugly living city, this game was really fun until phantom liberty broke it for me, now things just don’t stop popping in and breaking things.

[@kurofushiguro]

Great video bro, went from avg, 60 fps to avg, 120

[@Peter_nzl97]

Commenting from 2024 and this guide has proven informative and extremely helpful. I've got a beast of a setup but it has dramatically improved my Cyberpunk 2077 experience as I'm on my first Corpo run through (2nd game playthrough). Thanks! :)

[@shintao5323]

I had serious trouble finding settings that both look good, are free of stutters and with which the game is stable with my hardware. I started with your settings and the experience is soooo smooth, thanks a lot!

[@Mrhardin18]

this video made my gameplay more awesome, i do enjoy looking for the details, and this settings makes them look insane, i do have a RTX 4060 and it goes around 110-130 fps using all the ray tracing on, has been so long for this video but still works with the 2.2 update haha

[@markcunliffe7430]

I spent so long trying to work out the best settings and failed. Wish I'd found this video earlier, it was super helpful. Thanks for making it.

[@pranaveswar8486]

I have rtx 3060 card and I was getting around 50-55fps even with almost all setting being at high. After this video, im getting a stable 60 with even better visuals. Thank you so much dude, you helped me a lot. Hope this helps other people too!

[@rileyharris7631]

Thank you man, redownloaded CyberPunk and was getting 15fps for whatever reason and followed your guide and getting a smooth 75 your the best!

[@monsterclips_]

Wow! This is the first guide that I watched and I gained 30-40 fps, thanks so much dude! RTX 4060 Ryzen 5 5600 32 GB DDR4 RAM

[@jimpickens8551]

Great video, the first optimization that´s actually helpful

[@MichaelThomas-be7gq]

That is incredible, and thank you. I am running an i5-12600K with the venerable 1080Ti, (so no DLSS or Ray Tracing) and previously on High settings. This is 1080p, and I was getting about 64fps on benchmark. I do like motion blur so set this back to High. The rest of the changes, I cannot tell the difference. I'm now getting 84fps with 109 high and 64 low on v2.1, too. This is a brilliant video, thank you again.

[@TheRubyStudio2019]

Oh my god thank you. This saved my gameplay. I streamed last night and it looked like I was recording on a old Nokia phone through a potato lens. So much better now.

[@unnamed715]

*Video:* VSync: Off Max FPS: Off Windowed mode: Windowed Borderless Resolution: (Your native res) HDR: None Nvidia Reflex Low Latency: On with Boost Enabled (If your GPU is stronger than your CPU) On (If your CPU/GPU is balanced) *Graphics:* Texture Quality (Setting only visible on main menu): High (on 8GB cards, lower on 4GB cards) Frame Generation: Only available to 40 series cards, but turn it on if you have one. Seriously, it's magic! ;) DLSS Super Resolution: Quality DLSS Sharpness: Between .80 and 1 Nvida DLAA: Off *Basic* Field of view: 100 Film Grain: Off Chromatic Aberration: Off Depth of Field: Off Lens Flare: On Motion Blur: Off *Advanced* Contact Shadows: On (But turning it off can get you additional FPS on lower end systems) Improved Facial Lighting Geometry: On Anisotropy: 16 Local Shadow Mesh Quality: Medium Local Shadow Quality: Low or medium depending on the strength of your system Cascaded Shadows Range: High Cascaded Shadows Resolution: Medium Distant Shadows Resolution: High Volumetric Fog Resolution: Low (for most people) Medium (for beast rigs) Volumetric Cloud Quality: High Max Dynamic Decals: Ultra Screen Space Reflections Quality: Medium - High Subsurface Scattering Quality: High Ambient Occlusion: High Color Precision: High Mirror Quality: High Level of Detail: High Crowd Density: High (If you have a good cpu) Low (If you have a slower or older CPU) *Ray Tracing* Ray Tracing: On Ray-Traced Reflections: Off Ray-Traced Sun Shadows: Off Ray-Traced Local Shadows: On Ray-Traced Lighting: Off Path Tracing: Off (Unless you have a beast system with a 4090) Path Tracing in Photo Mode: Off (Same as above) *There. I just saved you 16 minutes of your life.*

[@yourn1ghtmare968]

Doing gods work

[@thehonoredoneJr]

bro if heaven exists you're 100% going straight there

[@VRixxo123]

I hate you tubers like this

[@HikaruOfficial]

w

[@samgreen2485]

W

[@thebarnineffect]

Decided to revisit this game with a new monitor 1440p and used these settings with a RTX3060 & I5-11400f gained 20-30FPS from using the base settings and the game looks great. Many thanks for the guide.

[@alphahannah_]

I was using these settings before update 2.1 dropped (running a Ryzen 5 5600G & RTX 3060) and my FPS went from 30-40 to 80-90, then 2.1 seemed to throw my settings out the window. Glad I was able to come back to this!

[@jennifermoore2593]

Good job yo. I been suffering with about 45 frames a sec and wishing for more. You made this game better for me. Thank you ❤😊

[@daniels6147]

Only vid that was clear and helped me get the best looks

[@charlesphillips9718]

Amazing, bro. You helped so much. I gained on average 20 fps as high as 30 . low-end 10. Thank you so much.

[@Stuntzii1]

good video man i recently upgraded from a 1070 to a 3060ti i had most of the same settings but i tried some u suggested good explaining all the setting and the video wasnt an hour long

[@mubrek236]

In my experience since release,decreasing the crowd really buffs up the FPS. + points for running over less people if your driving license is from Brazil.

[@rewub7172]

My fps took a huge tank in dogtown but these settings made it indistinguishable in terms of fps from other areas in the game, thank you so much!

[@TheJacksfilms]

Liked and subbed went from 50 fps to 80 just like that. Thank you good man.

[@柄夢魔叉羅]

Excellent! Thanks to this video, a game that has always had poor quality and slow operation is now light and clean as if it were a different game. I wanted to express my gratitude even if I had to use a translation site. Thank you.

[@Malkamok]

Dude, Monstrously helpful video, much appreciated! 🔥

[@DanielVerberne]

Nice. Just got myself an RTX 4060 OC 8GB and while it's not top of shelf by any means, I'm impressed and happy with the results in Cyberpunk, especially so after following this guide. Thank you!

[@j35oryx]

A little late to this but I just got into cyberpunk heavy. I’ve got a 4070 Super, i5-12600k, 32 gigs of ram, Frame generation and ray reconstruction on. Runs extremely smooth at an average of 185 fps. With DLAA I’m getting a still solid 130 fps both at 1080p (didn’t beef up my monitor yet.) Thanks for the huge help!

[@OfficialDanteWolf]

Sir, this was game changing! Thank you!

[@boomshakalaka2002]

Great video! Glad you explained what each setting does too. I have a I7-13700 and a 4070. The game auto maxed everything and was getting normally 90-100 frames and down to 60 in more graphical intense areas. Now I get 180 and 140 in intense areas.

[@shashwatmali3640]

💀💀💀

[@shashwatmali3640]

Me happy with my 3050 getting good 30 fps on high settings

[@D0GLS]

@@shashwatmali3640its a lie lol about fps I have 4070ti with good cpu U cant chance fps for so much Bro probably turned on dlss 💀

[@voronov95]

@@D0GLS maybe 1080p

[@LsdRaccoon]

@@D0GLSwhat’s wrong with dlss?

[@eikestolze9109]

I just realized that I don't have to decline a feature. I play with the "Ray Tracing Overdrive" preset with path tracing on and 2K ultra-wide screen resolution and get around 100 FPS. My hardware is good, but not the best (for example, the smallest current CPU). But I chose a 4080 graphics card - and oh my god, is that a beast of a card! I will never regret spending €1500 on it. The good thing is that the card will be enough for the next 10 years (as long as the card doesn't break).

[@BLVCK-VINCI]

Thank you so much my game looks and feels way better

[@serratedDharma]

In the end of the vid when you said comment ur fps and ur specs, really helps from a person pov who tryna buy the game. gained a sub !

[@cabbage_spilla]

Dude you are the greatest you have no idea the game still looks phenomenal after your settings ❤

[@luismkts]

Great settings and great video! I just differ on one thing you mentioned about Path Tracing. I've played the game in both rasterized and ray traced modes, the visual upgrade you get with normal ray traced mode is only worth in reflections mostly. But now that I've tried path tracing... OMG it's a totally different experience (visually). Of course you will destroy fps with that setting on, but if you have a nvidia 4070ti or higher, the game is surely playable. I'm running it on that card and getting 50-90 fps without your optimizations! For me the most important thing for any game to look good, is great lighting, and don't get me wrong, cp2077 looks beautiful even in pure rast mode!

[@Globespy]

100% agree. This is not a game where you need max FPS for latency/accuracy like you would in competitive FPS games. This game is so beautiful and if you have hardware that can run it, it's a crying shame not to use it. I'm lucky to have X3D CPU with 4090, so can max everything (path tracing) and still keep perfectly playable frames. I could care less about getting 20-30 more FPS and losing the visual experience this game has to offer.

[@RedRyan1]

Yeah, I’m running a 4070ti on a ryzen 7 2700. Usually have it on ray tracing low when streaming with a fps of 70-90, and without streaming can run ray tracing ultra, even overdrive with 60+ fps.

[@ExarduffmanTheFirst]

This is a good guide for solid performance for me with 95-105 FPS . I'm running a 3060 (12GB) with AMD Ryzen 7900X 32GB, Resolution: 3440x1440

[@AtlantisDrift]

My FPS shot up from 65fps to 90fps on the "Run Benchmark" test inside video settings in-game. That's a 38% FPS boost! I too have a 3090 GPU like the video poster (as well as a i7-10900k CPU), and I more-or-less did exactly what the video poster did except for maybe 3 options which I did different (put on more demanding of setting). This video is gold to get your FPS to skyrocket while also, surprisingly, making the game look even better! Hats off to FourEyes for posting this!

[@NoGate]

Absolutely bonkers guide, thank you so much dude!

[@nova573]

used to play on a i3 12100f and 6600, Finally swapped ot i5 13600kf and a 4070 super sice it was black friday delas and wow these settings plus the hardware make the game just feel so much better!

[@badgrafikk]

I had some improvement, about 20 fps I think and I'm running the game on a 4070 super! Thank you so much for this video, really appreciate it!

[@naka6162]

for me personally I have to say that lighting makes a huge difference in visual fidelity. So much so that I'd rather go with path-tracing on and medium texture quality to balance out the VRAM usage. It runs at usable framrates for me, but I also only use a 1080p monitor with a 3070Ti

[@xuras2943]

its been 11 months i hope you realised by now you should use a 1440p monitor instead of 1080p with 3070ti

[@naka6162]

@xuras2943 not with mine, I've got the 8gb version. I'm constantly out of vram

[@xuras2943]

@@naka6162 its an overkill card for 1080p resolution. Vram is important but 3070ti is capable of doing it. If you never played on 1440p monitor before, once you do it you can't go back. it's like putting glasses you don't realise you are blind

[@naka6162]

@@xuras2943 trust me I have both and I prefer having smoother frames so I stick to playing games on my 1080p screen because 8gb just ain't enough for 1440p with all the bells and whistles on

[@Montanajj]

Great video. Increased not only my fps drastically but my game also looks wayyyy better.

[@gh3ttog33kgaming3]

Bro you gave me a major FPS boost went from clocking under 30 to 50 better than before but tryna get more

[@volodymyrsanotskyi3473]

omg bro thanks so much!! helped me to get fps from 17 to playable 55

[@TheVillainOfTheYear]

I find it really irritating when people say things like "this setting has no impact on performance." Sure, it doesnt on your 3090 system, but it can and does in lower end or older cards, or even good cards paired with lower end CPUs for certain settings. Just because the bottleneck is elsewhere for your card doesn't mean that's the case for everyone or every system.

[@KillrOnDeck]

This video actually went so hard my game looks so clear now

[@eartlavia]

thanks man! i have a 6400 rx and its difficult to me to find balance between performance and quality. your video has helped me to get a smoother game with cool graphics

[@gregnm369]

Adapted your advice and jumped from 31fps to 75fps. Game still looks good in the benchmark tool. Nice video!

[@5ickBreeD]

...and with this video YOU earned my SUBSCRIPTION...good one keep 'em comin'...

[@Robot_Sonic]

This is one awesome guide to properly running Cyperpunk 2077! Thank you for this man 🙂

[@GiliusGaming]

Many thanks. You’re the best! Update: I have the 4060. Fps went from 79 to 97.78 avg.

[@r5kora]

best settings, ty it's really upgraded my fps and my game graphics still good :D

[@MrJ0hanh]

I play with Path Tracing and all RT on max. My FPS went from 28-30 avg (console experience) to 38-40. 33% gain. 😊 Specs: 10600K, 7900XT eco-mode. My PC is built to be quiet and cool. The difference in quality is massive. I dont wanna play the game without Path Tracing.

[@AnOatBran]

Finally some good settings! I havent been able to optimize this game until now and can finally enjoy it. Hardware Unboxed just lost a follower and you just gained one sir.

[@Kakusandan]

Good guide, got me to a solid 70ish fps 1440p ultrawide w ryzen 9 and 3060ti

[@obijoekenobi]

That DLSS Sharpening made my game look incredible thank you !

[@Cestariarts]

0:06 floating car LOL

[@littlecock118]

you're right bro wtf is that shit 😭😭😭

[@clutcher96]

Thank u this was awesome I went from about 60-80 to 170 with FG with a 4070 super and 7800x3d

[@_leymo]

I benchmarked the exact same settings shown in the video with local shadow raytracing enabled: Min: 70 Max: 192 Average: 148 System: Laptop/Mobile (Acer Nitro 517-55) RTX 4060 - i7-12700H - 16GB DDR5 Standard power mode

[@tassaras8]

what temperatures do your cpu and gpu reach ? i play on msi with similar specs..

[@_leymo]

@@tassaras8 im not actually checking my temps while playing but im pretty sure it never hit above 80 degrees

[@TheLordMustafa]

Thank you very much. The FPS jumped from 54 to 80 or more, and I am using a 4060 graphics card. ♥️♥️

[@joshualarson8431]

Running a 4060ti, got almost 100fps over the ultra with DLSS active

[@K-ofe]

I appreciate you!

[@pirateroberts7684]

Well done, it worked for me way better than the default Low Medium High settings. Your recommendations are a real functioning optimozation

[@sayantanchakraborty4536]

Bro you're life save! GODSPEED to you! 🔥🔥

[@Shadowslave604]

Awesome changes. I have been fiddlingwith setting for some time and best i got was 40-50 fps but with your suggested settings i get 70-90. Huge jump dogtown is not a stuttershow anymore. Thx for the video.

[@Leo-mk5se]

TY for guaid i love it i got 180 fps insted or 30 and image is grate. you earn SUB

[@chicolopes1928]

A written list of this would be great. My game settings resets every time I boot it up :p

[@curie1420]

as someone who gets 90+fps on maxed settings but came from a low end system, this doesnt explain everything in the settings but it does help to those who have an old gtx gpu

[@YouVolt]

I’ve got a 3060 ryzen 7 5700x and this really helped my fps

[@Faylus]

Yooo thanks for the details and dislclosures

[@ashtondillard6906]

Bro on my 4060 laptop following your instructions(plus ray tracing) I’m getting able to run 1080p100fps and looks mind blowing.

[@tomaszmuza1957]

Woah just what i needed, didnt expext so good video about this to exist.

[@tomaszmuza1957]

Update: I weny from ~40 to ~70 FPS thanks to it and the game looks waaaay better than what i had on 15 FPS

[@tomaszmuza1957]

Update 2: now im at stabvle ~80 after another guide with nvidia settings ang the game looks better than ever

[@Thatboinyx]

This worked a lot for me! TY!!!!

[@adickurig]

Went from 35-40 fps to 75-85fps. Thanks man. Game still looks great! 3080ti and i7-9600k.

[@_leymo]

bro holy, go upgrade your cpu thats one hell of a bottleneck right there

[@adickurig]

@@_leymo Yeah I'm beginning to feel it. I've got my eye on some i7-14700k/mobo/ram bundles at micro center.

[@y0h0p38]

​@@adickurigGrab a r5 7600 for 200 if you can. A steal rn

[@adickurig]

@@y0h0p38 I'm probably going to rebuild my rig with an R7 7800x3D after the holidays. My Intel fanboy era comes to an end.

[@torchwolf2035]

I run this game as high as I can for a 3070 rtx , these tips helped boost me by roughly 10+ fps howver normally i fell like this should increase your fps by about 18fps

[@sydhamelin1265]

Killer video breakdown! I was already pretty close in my settings, just from a lot of experimentation, and this video will save people a LOT of that time I used. I run on a 3070ti mobile, so I went a little more on the FPS side, like having contact shadows off. The one that I have off, that I'm immediately going to toggle on, is Lens Flare. I just don't typically turn it on, but the mention of all the neon has me curious to see. Plus, my current FPS floats between high 70s, in the most dense areas, to mid 100s, meaning I have room to add a little more.

[@jedadiahtucker2132]

good recomendations overall. the only 2 things id say need a "astrix" would be V sync, and motion blur. V sync unless youre sensitive to latancy or in a competitive game you really should leave that on. save power, temps, and possably noise. unless youre struggling to hit the refreash rate, as it can create stutter in that case. then motion blurr, if you struggle with motion sickness in game try turning on motion blurr. its something youre brain dose to fast moving objects naturally. especially if you sit close to youre screen and/or it takes up a large portion of youre field of view this can help a ton. it can make it worse though depends.

[@EDGERUNNER_101]

I have ryzen 7 7840HS RTX 4050 6gb (laptop) and I am getting 80 - 100 fps. This is the best setting I got, thank you so much !!

[@DraganAlves]

Such a helpful video, thank you! I would add: it seems like you could turn on path tracing in photo mode, because then you're not as concerned about FPS

[@thegiomandude]

Thank you for the in-depth explanation of everything. With your exact settings I got an average of 132 FPS on my 7900XT GPU and Ryzen 5 7600 CPU. I think I might try turning of AMD FSR thanks to this and play that way. Edit: With AMD FSR Turned off the benchmark result is 113. So I am keeping these settings (with only AMD FSR turned off). Thank you very much for the video.

[@luciomartinez6668]

thank you so much went from 60-45 to 71-90 w rt