TRCE Slash 4x4 Race Setup Video

[@fatman1288]

that is the nicest slash have ever seen!

[@CyconXc]

The main reason is the quality of the product. Team RCE is a smaller business and rely on their quality to maintain their reputation. The RCE chassis was built for those who want to convert their slashes into competitive racers. Not saying the Traxxas lcg isn't made for racing, it's just that it has other purposes too. The flat plate of carbon fiber also makes it easier to mount electronics, changing and rearranging layouts to fit your needs.

[@CyconXc]

It's the system the tracks use to count your laps. Each track has a buried wire that senses every time you pass. And when you pass, the transponder tells the system how fast your lap was, your pace, and the leader. They won't let you race without one.

[@CyconXc]

The RCE chassis was built for those who want to convert their slashes into competitive racers. Not saying the Traxxas lcg isn't made for racing, it's just that it has other purposes too. The flat plate of carbon fiber also makes it easier to mount electronics, changing and rearranging layouts to fit your needs. I would get D8's over the power strokes, more oil volume, and bigger pistons.

[@franksantarcangelo1950]

Nice I'm new to the hobby but my passion was building motorcycles an ATVs but can't do it no more for medical reasons but my new passion is RCs its been alittle frustrating from time to time learning but anyway I love your build I jus picked up a slash ultimate you gave me a lot to think about thanks bud👍🏻

[@CyconXc]

Thanks, appreciate it. The BEC worked great with my MMP. All the servo glitching and brown outs problems were gone after I installed it. Even if you're not having glitching problems, I heard it's advised to run it anyway.

[@CyconXc]

Welcome to the club! Yes you will need double sided tape for the esc and reciever, but you could just drill holes and mount the esc on with screws. The MMP should work fine with the VXL, but if you're buying it new you might as well spend an extra $70 and just buy the whole system. The castle 4-pole motor will give more torque/speed and opperate at lower temperatures.

[@CyconXc]

The TRCE arms that I have are $40 for one pair, $80 for all four. It's a little pricy, going by the whole protrac kit at $60, but it's definitely worth it. I feel your pain and I got tired of it. I bought 2 extra P-L arms after 2 broke, so it adds up to about the same price. You can get them at trce's website.

[@CyconXc]

The STRC Bellcrank is awesome, a manditory upgrade in my book. After repeated hits, the stock bellcrank will start to bend and flex, giving unreliable and inconsistant steering. Being metal, the strc one will get rid of the inconsistancy and provide sharp smooth steering.The STRC one also has an ajustable servo saver so you can anjust the stiffness to your prefrence. For $25 it's a great upgrade! I never noticed no one else had a video up. If have time, I'll try to make one :)

[@RCINVASION2012]

If you are in Georgia you should come down to TAPs rc raceway. It is 5 miles south of Senoia,GA. the next race there is Dec 22. the 4wd sct class is super competitive. It is awesome!

[@TheBjgw66]

I was thinking the same thing. Very nice truck, tons of optional parts, and clearly very well cared for... with stock shafts. Although, there are NOW (not sure about at the time of posting.) the Tekno shafts are available in the Pro-trac length....

[@higgout]

Your truck is awesome man. Love the setup and all the custom stuff. Great Job.

[@CyconXc]

I don't know what else to say. Haven't seen any other Slash 4x4 users with those shocks. Just keep experimenting and testing, I have a feeling you'll get it pefect.

[@CyconXc]

I still have the carriers as they where stock, so I think thats 1 degree. As for the drill bit, the mud guards 3mm screws, so either a 3mm or 3.5mm bit will work.

[@CyconXc]

Ok cool. I came up with an idea to make nerf bars out of the front bumper brace on the Slash 2wd, which works well if you wanted to run nerf bars. But really, unless you race in a demolition derby, the bodies don't get hit enough for them to be necessary.

[@jaybee2596]

You can completely build a slash from parts that hasn't a single Traxxas component in it. Is it still a Slash? A question for the ages. … like the guys who restore cars and the only thing they don't replace is a piece of the frame with the serial number. Is it still a Chevy ?

[@CyconXc]

Thanks for the comment! You've picked the most important parts to get in aluminum, the only other things I would get are aluminum hexes and steering rack, both STRC. I have both, must haves even for a basher :)

[@CyconXc]

Awesome, glad it went well. At first with my Big Bores, mine bottomed out alot. I was using 60 and 80wt with losi springs. What shocks do you have? Usually just requires tuning, getting use to the truck, then figuring out oil weight and springs to use. I learned that running too thick of oil won't let the shocks cycle properly. So running lighter oil (45wt)and linear springs should work out. If not, better shocks should be your next upgrade.

[@CyconXc]

Nothing has ever got stuck in there, but dirt/mud get on it from time to time. It doesn't affect anything though.

[@CyconXc]

Cool man, you're gonna love it! When it gets there, let me know if you have any questions about the install. But for the springs, mine are the HB grey springs, 60mm.

[@TheBjgw66]

Savox 1258tg isn't a HV servo... 6.0v max. Moving your lower shock mount on the a-arm isn't intended to be used to adjust ride height... thats for dampening. To adjust your ride height, use the pre-load rings or clips. Sensored operation shouldn't creat more heat...

[@CyconXc]

Always exciting to upload a first video! Darn UPS, hurry up! There's only 2 reviews on this chassis, and when you get your's up, you'll be getting alot of views from people wanting new videos!

[@CyconXc]

I wieighed mine recently and it was 5 lbs 10oz. Glad you decided on a system, let me know when you get!

[@jeremiahmoses8159]

Dude that thing is sick as hell. Thanks for sending me the link!

[@RcReventon]

Thanks. I'm looking forwards to it!

[@CyconXc]

That it weird. I guess it just comes down to oil capacity. Yours look like they're 13mm bore, while mine are 16mm. So more oil means more dampening. If you don't have one, I suggest buying shock oils in the multi pack to experiment and even mix different weights. It takes a while to get it dialed in. SC10 4x4 shocks are also 13mm, and people that use them on RCE Slashes use 35 and 40wt.

[@CyconXc]

OK cool. The BEC is only mandatory on the Mamba Max because it has such a weak internal bec. You can use the ext. BEC on any esc as an extra precaution, but it's not needed. Same servo works fine with my RX8 without the ext. BEC.

[@CyconXc]

Those look like they're quality shocks. But the dampening of shocks depends on how many holes your piston has. Mine right now have 6, and for now it's good, but I might want to try 8 hole pistons because sometimes my shocks can't cycle quick enough on small bumps. I can run 27wt because the D8 pistons dampen alot more than other shocks. If 27 was too thin maybe try 32wt and stiffen your springs a little. But before you do that, check to see how many holes your piston has.

[@CyconXc]

Thanks! I'm using the Tekno V3 buggy chassis guards, they're about $7.

[@bassjunkie4881]

This slash is bad ass I've been wondering about 1/8 shocks turning mine n my sons into mt's n I just hate the big bore traxxas shocks I bought for us thanks

[@RcReventon]

Hey, can you do a review of the strc bellcrank? How do you like it? How does it help? Im thinking of getting one, and if you do do a review, it will be the only one on youtube? Feedback will be greatly appreciated!

[@CyconXc]

Yes only one bearing is included. It's the main drive bearing for the slipper/center diff.

[@20LSU]

Hey would you recommend the Team-RCE chassis or the new LCG traxxas chassis, and what shocks would you recommend the proline power strokes or the D8's.

[@AlvinR58]

thats the same that i found! GREAT and is the BEC needed for the mamba only?

[@EsTkennypowers]

HEY i have a quick ??? keep in mind i'm new to the hobby, with that said my main question is what makes this chassis better than the traxxas lcg ?? anyway great vids man!!!

[@CyconXc]

Haha yah.... I've been waiting for Traxxas to realease their XO-1 type cvd axles that fit directly on the slash 4x4. They just annouced them, so I'll be getting them as soon as I can!

[@AlvinR58]

yeah man! you are so awesome!!thanks alot

[@CyconXc]

Cool man! I'll be waiting!

[@AlvinR58]

oh my god i finally installed the chassis lol but will your truck bottom out easily?mine always bottom out.

[@RcReventon]

Nice truck!

[@CyconXc]

Yah I could do that. Would you want the gopro level with surface I drop it on so you can see if it bottems out?

[@rcst-lazare4255]

the most stacked traxxas slash in the whole friggen world

[@MrComonroots99]

Clean Ride bud, What is that chassis protector youre using? I like it

[@MrComonroots99]

Sweet. I see it. How is it running without nerf bars?

[@CyconXc]

Honestly you should just go with the SCTE. You'll end up spending or wanting to spend too much on the slash to make it competitive. The SCTE is a much better platform designed for racing, and it's a strong truck, so it's great for bashing too.

[@20LSU]

Since your slipper/pinion gear is not covered have you had and debree get stuck in there.

[@emaxxracer9931]

My Slash isn't even set up half as good as this truck. What oil should I run in Powerstrokes or even stockers?

[@mikekoz68]

You sound very young, but with a ton of experience lol Awesome looking setup you have there, would u say that Tenshock is comparable or even better than the Castle motors?

[@triger2thegrip]

good vid man, very well done!!! ive got the cc bec on order for my cc mamba monster. has it worked well for you?

[@AlvinR58]

And other thing.. Is there any bearing included in this package?

[@AlvinR58]

and can you make a video about testing out your shocks by throwing it on to the ground?I really want to know how tall will it starts to bottom out;P

[@tonydannibale3730]

i have a have slash and my shock have no rebound even tryed power stocks need a good shook with very stiff springs/4 a slash 4x4 6808 any modle any thoughts thankyou

[@Timfield.42]

@CyconXc aite ty man, i think ill hold a bit on the aluminm ones. bit to pricy

[@rcfreak1015]

I have a question I have the same servo and it was glitching a lot so I put in a glitch buster, if I have a glitch buster do you think I can run a bec at the same time? I have a castle creations mamba monster 2 1/8 system in my slash 4x4 as well

[@greenstx]

just curious, but, how is this a slash? I see slash bumpers, but that's it. why do you call this a slash when there nothing slash about it

[@CyconXc]

totally get what you're saying, but it still started as a slash. Stock parts or not, it's still on a slash platform. what would you call it?

[@greenstx]

you could call it a cyconxc sct? lol. ,im not insulting you , I just askin why do you still call it a slash. what do you mean , its still on a slash platform

[@CyconXc]

lol it's not like I designed it, they're all upgrade parts (made for a slash 4x4) so technically it's still a slash underneith, even if there's only a few stock parts left

[@greenstx]

alright , I get it now , thanks. I thought that it would be named after whoever the chassis was made by. but, like I said , I was just wondering. either way is an awesome truck and you drive it pretty friggin great. I just bought a slash 4x4 about a month ago and my wife would wanna punch me if I went out and bought something like this now. lol. maybe Christmas, yeah, that might work lol

[@Fanta.Fokse.]

Big oof

[@aidannina494]

What brand and wighet of diff oil and shock oil do you use?

[@AlvinR58]

i am already using the serpent 1/8 buggy shocks now lol the diameter of the shock is the same with yours in fact but why you use 27.5wt oil when you were making this video? lol thats really too thin i think cuz i have tried it yesterday lol

[@ITSJAYKARE]

You should try SPC batteries... they are relletively good and cheap

[@20LSU]

What is a BEC do I know it hooks your servo to the Esc but I don't really know what it is good for?

[@Timfield.42]

hey how much were ur arms front and rear and have bent on u yet? my proline arm broke on the mount again -.- really pissing me off

[@dylandebruyn9543]

Do you have a list off all the parts you have put into the car and the code if possible?

[@aidannina494]

What is the website you got the chassie off I chat find there website and you copy the Link to the website page of the chassi please

[@crazyrcboys]

what esc and motor are you running and what gearing do you have

[@AlvinR58]

excuse me,I want to ask what is the diameter of the holes on the shock pistons?

[@aidannina494]

Is having a lower kv better or worse for racing?

[@STEVOD313]

Looks great, I’m gonna look into one of these chassis I like ur content I just subbed

[@AlvinR58]

Oh man!!! just ordered the chassis!!! but one more question... are those springs 74gf?

[@dchevy34]

Yo can you still get these chassis or similar?

[@MrComonroots99]

Vehicle specific or is there only one.

[@backjackwards6024]

What kind of blinker fluid do you use?

[@shawnp8429]

Where can I find a after market chassis for the 4x4 slash ? Been looking everywhere

[@Rcrevocrazy]

what should I get a slash 4x4 ultimate lcg or a scte 4x4 rtr for racing and bashing

[@serdet123]

what weight oil are you running in your center/front/rear diff

[@pricelesspits]

looks just like mine

[@driveman4588]

if those parts were from Traxxas I would say OK so with that said can you get a slash with Traxxas up grade parts and compete

[@Julumkana]

you've done so many mods, can you still consider this a Slash?

[@Dj_Not_Nice]

is that chassis better than the lcg for on road?

[@ITSJAYKARE]

What steering servo is good for bashing?

[@CyconXc]

You can search Team-RCE lcg slash 4x4, and you can find my build thread on the traxxas forums.

[@CyconXc]

You're right, I misspoke.

[@Words4me2]

what does a transponder do

[@johnmansfield5826]

What do i need for racing the main things

[@ethanbrummer5117]

How much money did u put into it it must be a lot

[@CyconXc]

Too much lol, now that I look back I spent waaaay too much on this thing. It was at least $500+ over time.

[@CyconXc]

It's all in the description :)

[@CyconXc]

They're six hole pistons, each hole being 1.5mm in diameter.

[@CyconXc]

If you want more opinions, search team rce lcg in google and check out some threads on the Traxxas and RCShortcourse forums.

[@bradleyanderson3779]

what is the little red box up front

[@mikekoz68]

How do you figure this is a Slash 4x4 when absolutely nothing left on it is from Traxxas? I'm serious, what's left on it that actually was made by Traxxas?

[@mguidice3287]

Nothing with all the parts he took off he could build another slash 4x4 for free

[@johnathandempsey6743]

+Matt Guidice he still has the slash differential 😂😂 oh and body mouths

[@aaronchurchhill1508]

Nope the body mounts are RPM

[@aaronchurchhill1508]

And the turnbuckle/camber links

[@cameronmardis]

Turn buckles, camberlinks, diffs, and axles.

[@jjleadley]

what upgrads do u rec for raceing i got a LCG 4x4 just wandering if its even worth it

[@CyconXc]

jjleadley STRC bellcrank, prospec shocks, and a center diff.

[@jjleadley]

is the traxxas lcg chassis good or that one u got better ?

[@tonydannibale3730]

can i get the part # 4 the shooks and bootom peices of shock

[@BigDuke6ixx]

Are you racing this car?

[@1etergen]

All that and stock axles???

[@dallpall69]

With stock driveshafts?!?!

[@manuelcobian2355]

What cervo do you have

[@AlvinR58]

6holes with 1.5 mm holes too:)

[@yorkrojas1452]

There's nothing that is Traxxas branded any more, might as well not call it a Slash anymore, its a great car don't get me wrong though.

[@CyconXc]

There's only one, the part number is TKR400010.

[@Timfield.42]

@generalfield woops i ment a arms

[@AlvinR58]

nope,mine were 1/8 buggy shocks and the bore is same as yours :)

[@rcz2523]

does this even count as a slash?

[@sambaman47]

Where can i get a chassis like that?

[@CyconXc]

Sorry but they stopped production on them :(