CYLINDER HEAD GASKET REPLACEMENT REMOVAL JEEP CHEROKEE COMPASS RENEGADE 2.4 HEAD REPLACEMENT

CYLINDER HEAD GASKET REPLACEMENT REMOVAL JEEP CHEROKEE COMPASS RENEGADE 2.4 CYLINDER HEAD REPLACEMENT
If you need to remove the cylinder head or replace the cylinder head gasket on Jeep Cherokee, Compass, or Renegade with 2.4 multiair engine we will explain how to remove cylinder head and head gasket and what tools you need. This same 2.4 engine and its components have been used in multiple Dodge, Jeep, Chrysler, and Fiat cars this is why it should cover many models.
This video may help you on:
2014 2015 2016 2017 2018 2019 2020 Jeep Cherokee Cylinder Head Gasket Replacement Removal
2015 2016 2017 2018 2019 2020 Jeep Renegade Cylinder Head Gasket Replacement Removal
2017 2018 2019 2020 Jeep Compass Cylinder Head Gasket Replacement Removal
► Torque Wrench 3/8: amzn.to/2Qj5clU
► Torque Wrench 1/2: amzn.to/2mqww3J
► Cylinder Head Bolt (1): amzn.to/2nY3toq
► Cylinder Head Gaksket: 68188889AF
► Timing Chain: amzn.to/2nTtXrb
► Timing Chain Tensioner: amzn.to/2nXv2yl
► Front Crankshaft Seal: amzn.to/2o0Zrfe
► Screwdriver Set: amzn.to/34a6r9X
► Clip / Panel Removal Tool: amzn.to/2ZIa03I
► Tool Set: amzn.to/2n2dnpb
► Torx Socket Set: amzn.to/2oBNBZ0
► Reverse Torx Socket Set: amzn.to/2oEEYwQ
► Makita Impact: amzn.to/300c4Jt
► Dewalt Air Compressor: amzn.to/2nVApOq
► Impact Wrench: amzn.to/2nVAOjU
► Engine Sealant: amzn.to/2oKQOpp
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► 2ND Car Channel: goo.gl/EBCNtc
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300
amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch
amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser
amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable
amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310
amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405
amzn.to/2jk8nqB
•GoPro HERO5 Black
amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510
amzn.to/2ktOuB7
►Social Media
Instagram: / worldmechanics
FACEBOOK PAGE: / worldmechanicsofficial...
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
World Mechanics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics.

[@alexyoung3387]

This was very helpful. Thank you for taking the time to do this!

[@trackerrrr]

Be aware some of the 2.4l Multiair engine covers also have a 10mm bolt that holds the cover down. The bolt is on the right side of the engine towards the rear of the cover. You will break the cover at the corner if the bolt is not removed.

[@user-cb1kr4go5q]

There is no bolt holding the engine cover on, it just pops off as he showed in the video

[@robertlopez856]

Where can I find the video to put everything back together for the 2.4 love your videos

[@YasirKhan-hc4zs]

Really informative thanks

[@Washington4000]

Amaizing video, I was ready to buy a Jeep Compass with a blown head gasket. You save my life. Im a 40 year mechanic, ànd there is no way to do this job without remove the engine drom the car. THANK YOU SO MUCH!

[@markshuffield5757]

I'm doing it right now in the car. 🐈

[@KillerBoy-ds3uu]

Amazing bro❤

[@natojohnson5073]

Do you have a video of the VVAA being re-installed? Chrysler said I need a special 10259B compressor tool for removal and reinstallation or it’ll be damaged.

[@joseTorres-tn3pl]

Did you ever find out if you need a special tool I'm in the middle of installing it

[@AlpineStarz94]

You dont need a tool you can use a screwdriver to compress the hydraulic rams and then slide the rockers into place.

[@eddiehernandez1127]

Hi, did you do the reinstall with or without the special tool?

[@eddiehernandez1127]

@@joseTorres-tn3pl Hi, did you do the reinstall with or without the special tool?

[@VIPSTYLEUSA]

@@joseTorres-tn3pl were you able to fix the car?

[@pherrychimwayamwiinga6863]

Thanks - it's been of great help!

[@nonamebrandname]

Love your videos 👍

[@osmevi]

Super great video friends CONGRATULATIONS! very clear, very detailed on the information, I have to do this work on a Cherokee 2016 and now I don't have any doubt about all the process, thanks a lot!

[@misterfixit5186]

You call This guy's voice clear? It's hard to listen to Kermit the 🐸 for too long

[@John-hu9bo]

Hell of work just to change the gasket... Is it even possible without taking the enginge out? I can imagine it is super tight if not impossible to remove / mount the timing chain cover properly...

[@juggernaut8647]

What is that other deep hole next to the spark plug hole with the screw in it?

[@josephelliott5661]

What is that PCV hose you disconnected after the hiring harness?

[@Joshoptimus]

Hello Sir, Could you please make your subtitles at the top of the screen considerably larger when editing. They are very difficult to read ty

[@iziahlove5527]

Is this the same for a Jeep Compass 2014. Also some of the parts listed says it doesn’t fit my car

[@magedhassan9137]

Can i do this without remove the engine aout the car

[@Jay-sq1gi]

Why do they have to remove the cams?

[@KingNick96]

is this the same as jeep patriot 2007

[@nonamebrandname]

95% similar, throttle body is on the lower half of the engine on the Patriot. That’s the only difference I noticed.

[@anthonyevans4495]

What type of impact drill u using 🤣 that’s a bad mf 💪🏽