CZ 75 Floating Trigger Pin - CZ 75 Accessories by M*CARBO

[@MCARBO]

ALL OF OUR CZ75 UPGRADES HERE! www.mcarbo.com/cz-75-accessories.aspx

[@johnwhodat8135]

Wouldn't this harden pin damage the firing pin in a long run? Maybe the hollow rolling pin was there as a sacrificial piece and not to damage the firing pin? Firing pin retaining pin I'm talking about.

[@miguelbooth5826]

I got the floating trigger pin, stainless steel guide rod and extra power recoil spring today. It only took a few minutes to install, especially the guide rod which seemed to find it's own way in. Now that these parts and the trigger spring kit are installed I think I am all set. You have helped me turn a very good gun into a fantastic gun. Thanks!

[@alvinoraigoza2720]

Keep bringing those CZ accessories your products make the most sense

[@MCARBO]

Roger that! Thanks Brother for your Support!

[@73barracuda1]

Excellent tutorial. A quick tip when removing the slide stop, I cut the brush end of an old tooth brush & taper off the handle. I'm too clumsy and might scratch the surface if I use metal on metal. Thanks for the tutorial.

[@necavenue]

Looks like my SP01 will be getting this upgrade and the lighter trigger spring very soon. 😁Your installation videos are extremely detailed btw.

[@consortthantos3402]

I have a full pin and spring comp upgrade kit on its way. I have enjoyed pulling guns to pieces since my first air rifle

[@charlescarter3867]

Recently I bought a 75 pcr. The trigger pull, I thought, was too hard, obviously the decocked double action so I ordered the MCARBO spring kit. I watched the video and found it reasonably easy to follow and correctly install the kit. Having a sturdier replacement pin was an excellent idea as I noted that in this brand new firearm the factory pin was already damaged. I had only fired a few shots because I haven't been to the range, but I have a method for testing the ability for the gun to work. Other than firing a few live rounds I had only dry fired the pistol with snap caps. Nonetheless the pin already had the characteristic bite mark. Getting the trigger pin out was a bitch. Although careful, I still had a ding on the frame (I feel a bit better seeing all the rash on the video demo model). The pin had actually bent and of course I had no replacement. By this time a bit of impatience was setting in. With a half hour of profanity and some banging with a ball-peen hammer I was able to get the pin straight enough to reinsert and finish the job. Yes, I used the correct punch and removed the pin from the small end. I wondered what I would do if I needed to disassemble the pistol again. Now I know. I wish that the floating trigger pin had been in the spring kit, but assume it was not available at the time. I will certainly order the trigger pin for replacement when working on, or cleaning the pistol next time. One thing that I became aware of when installing the spring kit, was that the instruction video illustrated installation of the sear spring for models with safety but not for models with decocker. Knowing the complexity of CZ, I did not attempt to replace the sear spring. A video from MCARBO would have helped greatly as I would have preferred installation of the entire package. The springs that were installed did improve the action and double action pull is improved but not spectacular. This is not a criticism of MCARBO as every gun is a bit different and mine had a very stiff trigger from the factory. Hopefully it will work itself out with a few hundred rounds. A long post, but somewhat of a review. I am glad to see the introduction of the trigger pin! It was the correct answer to a problem.

[@MCARBO]

Just released the new video on how to install on Decocker Models kzbin.info/www/bejne/g6qlfp5pYrGKq6c

[@twkster1]

@@MCARBO I am anxiously waiting my spring and floating pin kits I ordered from MCARBO just this week. I have also ordered a Trigger Reach Reduction Kit from CGW and plan to install at same time. HOWEVER in the new Decocker Video there seem to be two important points missing: 1) For Single Side Decockers there is no explanation how to remove the Decocker Lever - though I figured out by examination that the Sear Spring must be lifted to allow dis-assembly. This is skipped in the video for Dual Decockers also. 2) I hear there are some additional differences in removing the Sear Assy BLock in Alloy Framed Guns also (a Shim that must be removed?).... If necessary I will do as this respondent here has done and skip the Sear Spring replacement at least until sure about all details. My brand new PCR is waiting to mod - thanks!

[@hod8931]

Ordered 2 with a spring kit! Good stuff! Highly recommended! Yes I'm a certified armor from colt, H&k, Glock and Sig, so I like good parts when I find them. Next idea floating sear cage pin so we don't have to restake after taking out pin??? The 😁😁😁

[@MCARBO]

Awesome! Glad to hear it Brother. Thank you for your Support! I like the sear cage pin idea...added to list.

[@mr_mel]

Wow you guys made one. How amazing

[@MCARBO]

Yes Sir, you guys ask for it and we will make it!

[@chronicdose]

Looks great I'll pick a couple up for sure!

[@MCARBO]

Awesome! Thanks Brother for your Support!

[@MrRebTyree]

Great video, I will be ordering parts for my CZ75 Compact this week. Thanks again for the awesome CZ videos!

[@waynet8327]

Just arrived, the pin looks good.

[@nomadicfenceman509]

I practice my shooting skills cuz I have too....I add aftermarket upgrades cuz it’s fun. Keepem comin!

[@MCARBO]

Thanks Brother, more on the way!

[@charlescarter3867]

Clarification of my long post below. In summary, I was very pleased with the spring kit. I was disappointed with the trigger from the factory. Without the spring kit, I would not have been able to improve the trigger pull at all. Double action is improved and very tolerable. Single action is excellent. Prior to installation the trigger was a blister maker. Just wanted to be clear.

[@MCARBO]

Thanks Brother for your Support! Glad to hear the excellent results.

[@stevendhiggins]

Works with aluminum frames too

[@michaelcolon3775]

Planning on getting the lighted trigger option for my p07 p01 omega soon can't wait looks to be the best value for your money !!

[@MCARBO]

Awesome! Thank you!

[@fredsalter1915]

How hard is the floating trigger pin? Oh yeah..... ROCKWELL 50! Great video, tho! Very informative. I have this pin and it is simple and sturdy.

[@toddrolland106]

Would like to see what the other part is for, and also how to put this together with the spring out.

[@Enigma_V8]

Watch the video on the trigger upgrade kit. kzbin.info/www/bejne/mYmWcqF9i9Oqjc0

[@jerrythompson9111]

Do you have anything for the firingpin retainer pin?

[@triggerman1092]

I bought a brand new cz pcr. Trigger pin all but came out after 20 rounds. Needless to say i was mad. Will this fix that

[@toddrolland106]

SP01 Phantom here, neither side flared, came right out about 1/4" at the range, disabling the gun

[@hobie695]

I use half of a wooden clothes pin to help remove the slide lock.

[@Spirit_Soul_and_Body_by_Grace]

Well this pin also work for the firing pin retaining pin on a P-01???

[@rickwhitman6435]

My p01 came stock with that style of pin

[@rickwhitman6435]

Omega trigger as well

[@dirtmcgirt7125]

The bag where my trigger pin comes in does not have an assembly tool. However, I bought the trigger spring kit in addition to the trigger pin as a bundle. The spring kit bag does have an assembly tool - is it the same part?

[@zenadventurer69]

Lots of talk about the integrity of the CZ 75 Compact firing pin retaining pin. General advice I’ve seen is NOT to dry fire the CZ 75 Compact (regardless of model) without snap caps or barrel block in place.

[@mikenagy938]

There is a better way than snaps, a Lazer cartridge that fits in the chamber. The cartridge has a rubber block that the pin strikes which should eliminate the problem. Best thing about the cartridge is that you can fire your gun at Biden every time he comes on TV. Bonus!!

[@davidgibbs1083]

That's good advice, I use a snap cap and a o ring around the firing pin. But that has nothing to do with this video

[@joehill4945]

Any idea if this pin works with the polymer SP-01 Phantom?

[@gman9945]

Arrrrg.... drat I missed this one for my P01.... Next order...

[@MCARBO]

Just released the new video on how to install on Decocker Models kzbin.info/www/bejne/g6qlfp5pYrGKq6c

[@angrychivafan]

Do you also make firing pins? I heard those are faulty as well on the CZ 75 P-01.

[@MCARBO]

We do not.

[@bfgivmfith]

I bought one, and would run it through just like you showed, but mine is A CZ75 P-01 with an aluminum frame. Is that going to be an issue somehow?

[@pocketstring3634]

Can the firing pin retaining pin also be solid, or does have to be hollow?

[@MCARBO]

The purpose of it being hollow is that it is a spring pin and allows it to be very tight once fitted in.

[@theaudiocrat]

Any plans to produce a similar product for the p-01 omega?

[@richards.mchardy3556]

what is the difference between a CZ 75 SP01 tactical and tactical sport .. I'm new to this pistol and I just bought my CZ 75 SP01 tactical and I really love it so I was wondering if the floating trigger pin will work on mine

[@leeboudreaux6698]

Do y’all offer anything for cz82handgun?

[@MrSPEEDFOUR]

What is it made of? How hard is it?

[@37gdog]

Do these fit the SAR P8?

[@TeensierPython]

If the pin is harder, will it oval the hole it goes in?

[@marcvena2050]

Tolerances on the new CZ SP 01 are much too tight to hammer the trigger pin through without a complete disassembly and the slide secured in a vice. Not sure how many shooters want to do that to their new pistol. My advice would be to wait until after you fire a few thousand rounds and the pin fails, then replace it. The tolerances may then 'loosen' a bit so the trigger pin can be extracted easier and replaced.

[@mtlamont]

Do you have the same for the front sight pin? Thanks.

[@flugel6856]

If you have any metal working skills find a drill bit that's the exact same size then cut off the smooth end the same length as the front sight pin... I did that to mine and I think it's better than that Factory roll pin.

[@MrSquid-vy2ik]

From left to right?

[@warrenwhitten1124]

Does this void the factory warranty?

[@ventilator2999]

does it work the Rami?

[@katigroszek]

Nice product. Got one and it works. Vid far too long, though and that "S7 tool steel hardened to 50 rockwell solid pin replacement, overkill" and so on said way, way, WAY to many times. We already "heard you twice for the first time", man! (Brandford Marsalis, was it?)

[@boomsticksmith5136]

Please make one for the CZ Phantom, Tanfoglio, and Canik in 2.5mm

[@BangBang-hk4rg]

Here you go cajungunworks.com/product/30600-floating-trigger-pin/

[@hobie695]

My factory pin came out left to right.

[@bsrpython257]

Installation 6:30-8:50.

[@levirockstube]

Took 3 minutes to get to the actual install. Sheesh. So skip ahead.

[@GhostDragn]

Nice, I'll be getting 7 of these, canni get a discount? Lol

[@jupiterjunk]

@MCARBO Damn it Chris, would you stop making upgrade parts for all of these quirky firearms. :) Next thing you're going to tell me is you're working on accessories for the H&K Mk.23 SOCOM.

[@MCARBO]

Thanks Brother, we appreciate your Support! We've got a few H&K items in the works!

[@jupiterjunk]

@@MCARBO I hate you. STOP finding new ways to spend my money! Ooops... that came out wrong. What I meant to say was; Shut up and take my money.

[@edacevedo7746]

Phantom?...

[@wildkatz84]

The only place I know to get a better trigger pin for the Phantom is from Cajun Gun Works. Cost is $13 + Shipping

[@janvodros8238]

I need minimum 2 pcs ...

[@MCARBO]

Awesome! Thanks Brother for your Support!

[@zenonayala9557]

Will this work on a rami. 2975

[@MCARBO]

Yes it works in the 2075.

[@kenethkuhn8558]

Zenon Ayala it’s a 1/4” shorter then the original, I took it out of my rami ac it cocked the spring and trigger off to the side and wouldn’t allow my tigger too return

[@zenonayala9557]

2075

[@waltervangorden5671]

way too much talking!!!! just do the upgrade!!!

[@cyclepath55555]

You don't want to hear talking, hit the mute button...

[@bsrpython257]

@@cyclepath55555 It's not the noise of the talking that's the problem, it's the time wasted with repeated statements. New teachers and coaches do this too.

[@dansharp8042]

Too much talking