Installation of trigger spring kit and forward trigger into a CZ Scorpion with firing pin disconnect shim. hbindustries.net/store/shop/c...
Пікірлер: 261
@rockfordwill1772 Жыл бұрын
5 years later this video is still relevant, thanks for helping. I’m impressed with HBI.
@nickfederico3 жыл бұрын
Thank you for this! I’ve had the spring kit sitting in my closet for two years because I didn’t want to attempt it, but after watching this video it only took me about 15 minutes!
@WarTheLand19442 жыл бұрын
Two years?
@reliablethreat232 жыл бұрын
Two years? You know you could have just taken it to a gunsmith, right? Damn, two years? 🤣
@TheDragon975 Жыл бұрын
@@reliablethreat23 Imagine giving someone else money to work on your guns. Its better to learn how to do it yourself.
@reliablethreat23 Жыл бұрын
@@TheDragon975 Imagine giving someone money to fix your car? Imagine giving someone money to help you recover from an illness? Imagine giving someone money to serve you a meal? You see where I'm going with this? A person's ego is their own worst enemy. A REAL man can admit when he needs help. There's nothing wrong with that. It's better to seek professional help sometimes rather than attempting something that might damage your investment!
@Shadow__1334 ай бұрын
@@TheDragon975In 2 years you could have graduated at SDI and learned how to make your own PCC 😂
@bforged44225 ай бұрын
6 years later and still works - thanks for this
@AlexB29984 жыл бұрын
Color coding the parts for tutorial videos is such a good idea, wish more companies did this.
@troygordon2 Жыл бұрын
I had a tough time with the trigger return spring bouncing back out of place as soon as I did a function test. If you could add that the TRIGGER RETURN SPRING should be flush against the TRIGGER HOUSING and the HAMMER RETURN SPRING should be on the outside with the leg resting against the TRIGGER CASE and keeping the RETURN SPRING against the TRIGGER HOUSING, that would be helpful. The leg on the outside keeps the TRIGGER RETURN SPRING underneath the bent arm of the BLOCK LEVER and prevents it from popping out. The spring looks like its thinner than the original and it would benefit from being a touch longer to help it get into place when doing the install and prevent it from pupping out from under that LEVER. A longer leg on that spring would not create any mechanical conflicts inside the trigger pack.
@p03saucez7 жыл бұрын
This video was 1000x better than the first one. Thanks a bunch guys.
@georgerafa50416 жыл бұрын
This was one of the most useful and easy to understand install videos i've ever seen. Great job guys!
@jp9011 Жыл бұрын
I did it! After having this trigger kit for a while, I finally installed it. Plenty of thanks to HBI and this great video. Did not install the shim. Didn't think I'd need it. Everything functioning well. Now it's time to Pew Pew!
@Frens037 жыл бұрын
It took me less than 30minutes to install the springs kit and new trigger. Good video! The trigger pull is amazing now! Cheers from Italy
@WD319697 жыл бұрын
Well explained! The color coded parts was an excellent idea.
@FighterxPilot3 жыл бұрын
Fantastic guide, very thorough, put my mind at ease for when I tackle this project. Color code was a great idea it absolutely helped me understand what parts are what and how to go about installing/removing parts. Thank you for the guide!
@859derrick7 ай бұрын
Added my reduced spring kit and installed a THETA forward trigger! Beyond happy. You cant beat an upgraded trigger for under $70. Best part, I was able to install myself with very little experience.
@TStock6514 жыл бұрын
This helped me so much. The color coordinated parts were a HUGE help!!
@Krysco514 жыл бұрын
Finally did mine today. Bought my spring like a year ago too. Instal went very smooth. This video made it really easy. Trigger definitely felt better.
@terrykelley69117 жыл бұрын
Night and day difference after installing one of these spring kits. Thank you so much for the video. Super helpful!
@keithsingleton16984 жыл бұрын
Just a quick thank you! I recently acquired an EVO S1 and this video was EXTREMELY helpful. Literally took me 10 minutes to install the spring kit and made a huge difference. By far the best upgrade you can do immediately. Thanks again for a great video!
@gearbarrel62375 жыл бұрын
I know people have already said this. But YOU GUYS DO AN AMAZING JOB ON THIS. The Color coded trigger pack is awesome, the video lighting and explanation is spot on. Carry guys you are knockin it out of the park!
@michael_alan6 жыл бұрын
I just installed your trigger spring kit. A breeze with your nicely done instructional video. My 2018 Scorpion had no welded collar on the trigger pack screw, so the whole project took fifteen minute including the time to clean and re-grease/oil the trigger pack components. Trigger is now quite acceptable at about 5lbs.
@stephennguyen54287 жыл бұрын
Excellent video! I just used it to install your trigger and the springs. Very easy to follow. I had the most trouble with latching the trigger spring and getting it all attached, but that's just because I don't have a vice and I was using my counter top to hold it all down. Thanks again!
@RollerPigg2 жыл бұрын
Did this three times... the third time was reinstalling the old trigger return spring, because the new, lighter weight, thinner trigger return spring kept coming disconnected. Somehow, it kept slipping past the firing pin disconnector. I know this is only a $12 part kit, but this is the fire-control group for my wife's home defense gun. Very glad I discovered this problem before she had to use it.
@hb_industries2 жыл бұрын
It is very important to make sure the spring is installed with long leg against the sear, and the sort leg against the sheetmetal FCG housing. A lot of people miss the short leg, because it can be a PIA to get the long leg of the spring under the firing pin disconnect bar, often the short leg gets over looked. If you haven't already, please call/email us sales@hbindustries.net and we can send you another set of springs if you want? The key is really the shorter bottom leg (orange). If the short leg is bent/canted under the longer leg, it will keep pulling the spring sideways like you are describing. The good news is that its a super easy fix, even if you have the springs installed, you can reach down with the blade of a pocket knife and slide the short leg out against the sheetmetal housing and push the long leg towards the sear. Once in the correct orientation they will not move (unless the spring is bent, and again in that case please just contact us with shipping info and we will get you another set of springs). I know these springs can be frustrating, but I promise we are here to help. We got you.
@JettaBoi046 ай бұрын
I had the same issue, and I definitely put the short end on the bottom. Going to be putting the old spring back in because it popped out on me too many times. And I tested it before installing everything back together
@alphaplayrblx4 ай бұрын
@@JettaBoi04 I have same issue like you , my solution is add another small spring to keep HB spring close to trigger.
@rftek6 жыл бұрын
Thanks for the informative video guys! I installed the trigger spring kit in about 2.5 hours. It was 2 hours of trying to get that darn trigger return spring in place, wow so much pain over that one. Eventually what I did was take a small flatblade screwdriver and cut a small groove in the middle of the blade, that helped to hold the spring in place while pushing the disconnector (?) down.
@danpeppers55645 жыл бұрын
Installed my spring kit today, video and bright colored parts were more than helpful. the vid was also well explained without all the normal gibber jabber. two thumbs up! and it took almost 5lbs off the trigger pull using the Wheeler trigger pull scale to measure by.
@doolay19883 жыл бұрын
Bought y'alls kit and took me no time after watching this. Trigger still has a mile long pull of course, but lighter with less grit. Thanks, keep up the great work!
@Paracane4 жыл бұрын
An extremely helpful video. The combination of color coded parts and detailed explanation made all the difference for me. Nice job.
@user-rq7jv9fl8b Жыл бұрын
I appreciate the time taken to color the pieces and make it soooo much easier to see and understand. Thank you!
@RayDCO5 жыл бұрын
Great video, VERY helpful. I wish all parts manufacturers would use the multicolored parts approach. It makes the orientation of the parts so much easier to see. This was the first time I broke down my new CZ Scorp Evo and the end to end install was done in less than half an hour including full operations checks in the reassembled firearm. Well done HBI!
@75thshootist6 жыл бұрын
Thanks for the springs and everything! You guys at HB are AMAZING!
@bernardvreulink24572 жыл бұрын
Thank you for taking the trouble to colour code the parts so as to make the video easy to understand!!!!!
@ashtonlively9273 Жыл бұрын
Great upgrade from a great company! I included the shim in my first attempt and was unable to get the trigger pack and safety assembly back in the lower. Remove the shim and it slides right in. The trigger feels sooo much better. Thanks HBI.
@JJacksonH532 жыл бұрын
Thank you for the great guide. I just installed the HB industries trigger springs. Your video made it easy! I especially liked the color coded trigger block. I made it very easy to see the different parts and how they interact. Great Job!
@hb_industries2 жыл бұрын
Great to hear that you were able to get your springs installed, and thank you for the kind words!
@neverahighscore Жыл бұрын
I love my CZ's and I love HB Industries! This install went so well. Thank you for a very detailed video and explanation!!!
@mackluster47144 жыл бұрын
Fantastic video! I'm a complete newb, and I was able to replace the trigger and springs in about an hour with no vice. I found that a small flathead screwdriver helps depress the spring nicely.
@SyphenHouse6 жыл бұрын
Great vid. A vice does make it easy. And what a difference to the trigger. Thanks for the spring kit guys!
@teddyjakeddy9754 жыл бұрын
I swear the parts in my gun were much smaller than those in the video. Could have bee my old eyes. Excellent video, 40 minutes for spring kit, trigger and safety delete and I think half of that was starting and stopping the video. Could not have done it without you.
@coupesix7 жыл бұрын
Just ordered your kit for my evo....thanks for the video it'll come in handy once I get my kit.
@loubryan57664 жыл бұрын
Very helpful! Thank you!! Fairly easy, all in all. Didn't even use a vice, just did it on the desk in front of the PC.
@badchips107 жыл бұрын
This an excellent video. It took me a while to depress and latch the spring but considering that I was doing it on the coffee table while watching tv it was not that difficult. The color coding of the various parts was a great idea.
@DIYDad13 жыл бұрын
Very helpful and easy to understand video, just ordered the spring kit from you guys!
@mmpatriot21702 жыл бұрын
Nice! Thanks for some good video instruction. I’ve only watched it once and I’m half drunk, so I’m gonna wait until tomorrow and watch it again before I do the actual work. But I can already tell that this video will be all the instruction I need. Thanks! 👍
@mmpatriot21702 жыл бұрын
Got it done. The trigger return spring was tricky! Thanks. 👍
@jolebole-yt7 жыл бұрын
Much much better video of how to install the springs. Thank you! My package did not come with that washer I guess not really needed.
@pewstickarsenal46244 жыл бұрын
Great video, exactly what I needed to install this little spring kit.
@vidaeis19115 жыл бұрын
EXCELLENT IDEA with the colored parts!!!! Great Walkthrough that can be used in real time.
@TacticalPeace7 жыл бұрын
This install was a pain but the video was perfect the color coating is perfect thank you for offering such a great product now time to install your free float rail. This is going to be fun
@ravenblack74344 жыл бұрын
Thank you so much for a badass product and a epic video! It saved me so much time and headache! 10/10 you guys rock!
@Leadslinger7626 жыл бұрын
Great video. I love the forward trigger and spring pack. You guys rock. Next on my list is a forend.
@passiton90165 жыл бұрын
What a great video...Installing my HB upgrades when they come in this week.
@silveriovargas9426 жыл бұрын
Best trigger job I've seen yet...
@duanetrivett750 Жыл бұрын
Killer job color codeing, it showed up great !
@brianm6686 жыл бұрын
Good video. Trigger return spring can be a bit harder to install than the video makes it out to be, but I got lucky and it went in after a couple of tries. Swapped out in around 30 mins on work bench with no vise.
@brian-8814 Жыл бұрын
SO MUCH better than the first video on this, that reassembly portion was practically useless on that one, great work.
@belonggta42902 жыл бұрын
Such a awesome upgrade Thank you for making this video. Wasn't bad to install .
@kwb3775 жыл бұрын
Thanks for the video! Just installed my spring kit...no problem at all.
@TheRollingTrip7 жыл бұрын
Make sure the small leg of the trigger return spring is sitting against the trigger housing. The first time I installed the kit, that spring somehow twisted, and forced the long leg to move towards the housing. The problem this caused was a failure to fully reset when releasing the trigger slowly. I was forced to move it forward to hear the click, and fully reset the trigger. I didn't notice the problem if I came of the trigger fast. Once I found my screw up, it worked perfectly. By far the first upgrade needed on the CZ........besides that damn safety lever. Although, HB has a fix for that too.
@andme94087 жыл бұрын
TheRollingTrip i thought that was my problem too but installed correctly same thing happens every 20 or so rounds it doesnt reset why?????
@ArmaOps6 жыл бұрын
Mine fails to reset on every round, unless I use +P ammo. I sent HB an email to see if they can help me out.
@1990jwall5 жыл бұрын
How was you able to fix the crossing spring legs I also have that same issue
@silexaurelius5 жыл бұрын
thanks for this very helpful video. Saved me $50 paying my LGS to install it.
@zsebi6964 жыл бұрын
Best video for trigger spring replace on a scorpion! thank you
@jordanbarnard82192 жыл бұрын
Great video, I’ve been trying to figure mine out for awhile, and just now found out all I need is to put a washer in due to mine walking off after a few resets.
@williamcarter8524 жыл бұрын
Thank u Went well, little trouble with getting spring down did not have a vice got her done great video
@stevemiller74334 жыл бұрын
Success! (finally) The hardest part is getting the little spring in position and starting the 5mm pin. Results are totally worth it.
@krickit3 жыл бұрын
Great directions and the color coding really made the components stand out.. Thank you for the video.. ya know, I really can’t understand why you would get any thumbs down, I guess there are always a couple miserable people in the crowd..
@AlchemxLampspark2 жыл бұрын
This helped tremendously, thanks a lot! Worked like a charm. Trigger is now as I would expect it for a CZ :D
@user-ne1lr8td8u Жыл бұрын
best video for trigger disassembly, thank YOU
@mariogarza92413 жыл бұрын
Just did it, thanks to this video. Fantastic! Thanks so much!
@idiotstick15273 жыл бұрын
So I’m pretty new to working on guns, having only stripped down the scorpion once. I followed the video exactly and just used a normal vice with some rubber. It wasn’t difficult at all. A heat gun is key in removing any screws. Don’t let the comments scare you, it’s a pretty easy task.
@jeff-ph9bc3 жыл бұрын
Thanks for a high quality and well explained how to video.
@jkon156 Жыл бұрын
Thank you for the guide. the eyeglass screwdriver on a leatherman wave+ works great for seating the reset spring on the disconnect lever.
@steverinaldi8909 ай бұрын
Thank you for the video. Had the spring kit for 7-8 months because I wasn’t sure about a vice. Installed without a vice and very simple just taking time following the video. Still not sure the point of the shim. It didn’t have one and it worked fine before so saw no need to install it.
@ShawnGS3002 ай бұрын
Great video, great presentation. Your detailed video was very helpful.
@Tr4v3ler3 жыл бұрын
This was perfect, seamless install
@samr61486 жыл бұрын
Very helpful demo...thanks!
@davidball83 жыл бұрын
This video just made my day. So easy with a visual walkthrough. Thanks.
@jmunguia7676 жыл бұрын
Awesome video. I wanna see more detailed videos like this one. Thanks hbi.
@kayebaron6953 жыл бұрын
Great video! One comment about the washer: I installed the washer for fun, despite my CZ's sheet metal housing appearing to be spot on (not warped). However, after installing the trigger assembly and testing out the hammer function, I noticed that when releasing the hammer it was contacting the left hand side of the lower receiver frame right next to the ejector. It did so to the point of making a slight indent in the polymer of the lower receiver housing. I removed the shim and the issue did not persist. I'd suggest not installing the shim unless, after assembly, you see a need to.
@AirTisdale2 жыл бұрын
The video makes it seems like there should be a tiny gap between the housing and the lever. Mine doesn’t have that gap, and the trigger reset feels like it binds just a tad. Would the shim seem applicable in that case?
@9kvtec6 жыл бұрын
awesome install video!
@wesleybray30462 жыл бұрын
Thank you. Great video and description of the install.
@sandymitchell81822 жыл бұрын
Just got this, and trigger,charging handle,ext mag release and yetiwurks grip, gonna be sweet 😊
@michaelsmith27333 жыл бұрын
watching this video and the one from mcarbo ind. gave me the nerve with a couple of different angles. I think I am ready to go for it now. I loved the color coated parts, great idea.
@deqwanjefferson29693 жыл бұрын
Great product, awesome video. Good job!
@RealCujo7 жыл бұрын
Thank you for the video!
@jwg3354 жыл бұрын
At a price of only $9.00 along with this detailed DIY tutorial there is no reason every Scorpion owner doesn’t do this to drastically improve their trigger.
@bradygatorz37113 жыл бұрын
Thank you for help! Super easy install👍
@DIYDad13 жыл бұрын
Just got your kit in the mail a couple months ago, finally got around to installing this kit. I was a little bit concerned that the hammer was loose in the up position, the spring didn't really have a lot of tension but it seemed like it captured the hammer just fine and I could push the hammer down and it would lock onto the sear no problem. So that part functioned properly. Hopefully that's totally normal. Although once it was installed into the receiver it seemed ok. The hardest part for me was getting the safety selector installed again LOL. Such a pain to get it lined up and snapped in all the way. At first I thought I bent the trigger housing and the safety bar wouldn't engage all the way, had to give it a twist and then it popped in eventually.
@newbootgoofin31392 жыл бұрын
I’m having same issue! Tips tricks?
@DIYDad12 жыл бұрын
@@newbootgoofin3139 for the safety selector not lining up? I just had to hold it in place and jiggle it back and forth and wiggle it slowly into place. Was a bit tricky but it eventually went once everything lined up. It was a while ago when I did the upgrades so I can’t remember exactly. Should have made a video!
@punjabistylz63018 ай бұрын
outstanding video - thank you for making this.
@michaelhuizenga20928 ай бұрын
I love you for making this video ❤
@martinmican46609 ай бұрын
Super návod,díky👍👍👍
@Adam-di4tk2 жыл бұрын
Great movie! Just changed the springs based on it and it works :)
@jtl4pr5 жыл бұрын
Great instructions!
@michael_alan6 жыл бұрын
Well done video. Thanks!
@Jebnert5 жыл бұрын
Awesome video!
@cheenoulee74553 жыл бұрын
Thanks for the video: took a while since I didn’t have a vise to grip onto the housing. Otherwise, great video!
@cole30782 жыл бұрын
My spring kit, forward theta trigger shoe, AK and mini AK style safety selectors, HBI takedown pin, and Yetiwurks pistol grip are all being shipped to me as I’m typing this. I will be installing everything at once. These are the final upgrades I’m needing to thoroughly complete my entire scorpion S1 pistol build that began when I bought the CZ Scorpion Evo 3 S1 brand new from the factory nearly 3 months ago. I’m so giddy with anticipation on this build and my already-installed aftermarket upgrades include: a Strike Industries handguard in the dummy can configuration, HBI pro-stock charging handle, SBTEVO Gen 1 brace, and a Holosun 510c-GR reflex sight absolute co-witnessed with a set of Magpul MBUS sights.
@jackblack66906 жыл бұрын
If you find yourself in the same position as me, having an *extremely* hard time installing the TRS without the legs crossing, then try taking something small like a bobby pin(toothpick would probably work) and wedge it between the lower leg of the TRS and the sear to keep the TRS against the trigger housing body. simply remove it when you have the pin for the hammer/disco in far enough to keep everything in place. Worked like a charm for me, but ymmv.
@rokrigjay3 жыл бұрын
Super easy install. Thanks!
@thesickening01694 жыл бұрын
Excellent video
@scoopthereal23533 жыл бұрын
Great video. Very helpful.
@PU663R682 жыл бұрын
THANK YOU !! Only problem I had was I stripped the trigger housing screw.
@survivalguy775 жыл бұрын
GENIUS!!!
@user-td7rg2dk1b Жыл бұрын
Perfect video 👍
@VEGAS4LO4 жыл бұрын
Just used this last night, in vice just a pair of 10 year old hands :). Worked out great and the best mod for the money
@pitbull1372 жыл бұрын
Sehr geiles Video, hat keine 2ß min gedauert das zu wechseln, Top Video ;-)
@ayechapin12 жыл бұрын
I just did this install Sunday... can't wait to go to the range to try it out... (11-2/2021) 😉