D-A Ultra-Fine Trial Kit Instructions

[@out_on_bail]

I’m only a home guy but just bought the 15mk3 for my cars. This video is exactly what I was looking for as my cars only need extremely light correction. Thank you so much for posting this.

[@RUPES]

Glad it helped

[@evangelospapagiannis6643]

Love this...an absolutely "must have"❤️😎💯... thank you RUPES...Jason you are a monster of instructor 🤘💯🤠⚡

[@RUPES]

Thank you!

[@emmanuelhud1]

Props to the editor and camera team always on point👌

[@RUPES]

Thank you!

[@cohenkane2148]

I got a Rupes DA. Now I just got to get one of those Rupes Jackets! Gets chilly here up North

[@RUPES]

Thanks for your comment. Our apparel is available to purchase, contact us directly via the links in the video description for assistance with that.

[@Halford8080]

Jason's videos are the best :) nice and calm explaining , do you plan to come to Europe this year ? i hope i can meet you with others detailers !

[@RUPES]

Thank you. We'll pass along your compliment to Jason. We're not really sure when we'll be able to resume international travel again. While there are some positive signs that we are moving in the correct direction with COVID, there are still many unknown risk factors and regulations that vary by country that we have to account for. We really look forward to getting back into the field with our friends and customers like before!

[@Halford8080]

@@RUPES Yeah i'm waiting the green light to travel also Cheers

[@joshuavild6999]

Great product proposition, slap this kit on any tool with proper instruction. Get professional results!

[@carlosoliva1376]

Good video

[@RUPES]

Thank you!

[@Gamesplaytoday]

you guys need a 4k or even 8k camera to get the quality of some of the improvements on video, even if it is just for the b roll

[@RUPES]

Thanks for the comment. The difficulty of showing the incremental difference a product like this makes on camera (especially on a color like Nardo Gray) is why we used the gloss meter to demonstrate the improvement in a tangible way. Even a higher resolution shot is not going to properly represent what is seen in person when discussing the final percentages of finish that are targeted in the ultrafine polishing range. No smoke and mirrors. Real, instrument-verified, improvement is the best way to validate that there was a measurable improvement to the finish.

[@Tank4sale]

Hi. Thanks for the info.. Does that mean you would do the whole car with just 2 pads ?

[@RUPES]

We would recommend at least 2 pads to do a car. More if you can, but at least 2.

[@dreday77764]

Iv seen some channels saying 1 pad per panel

[@bluegrasskid4835]

I always use at least four, more like six even when cleaning the pads between sections. I would like a package that includes 6 pads and a 250 ml bottle and no microfiber.

[@tsukuyomi8420]

Can you make a video about that gloss meter thing how it works

[@RUPES]

Thanks for watching. Likely not. We don't manufacture it or endorse it specifically. It is an instrument we use in the testing and evaluation of our products.

[@luizimercado9994]

Hi Rupes... what if my car has ceramic and small swirl marks and scratches already building up. What uno shld i use protect or pure?

[@RUPES]

Thanks for watching and commenting. Some ceramic coatings can be polished lightly, others cannot. It is best to consult the manufacturer of the coating for their recommendation. In the event you can polish it, UNO protect would not be suitable as a solution since it deposits a different type of protection on top and it may interfere with the properties of the coating

[@luizimercado9994]

@@RUPES Thank you sir for your reply, it helps me understand and know how your product. I bought your 3 kits together with Uno protect to try it on my shop. As a beginner and owner of a new carwash and detailer shop.... still impress Rupes product. cheers!

[@bpy4073]

We need to know one very important piece of info.....how much pressure to put on the machine so many detail vids miss this out.

[@RUPES]

Thanks for watching and thanks for your comment. As these are light instructions, specific to the DA Trial Kit we'd don't dive too deeply into the technique variables such as arm speed and downpressure. If you need more comprehensive technique instruction we would recommend you watch the BigFoot 101 series playlist. In chapter 5, specifically right around the 5 minute mark we cover the variable of downpressure as it pertains to random orbital tools. The pressure recommendation on other types of tools, such as gear driven, would be different and would also vary based on the specific vehicle/paint and target defect. In some situations you would apply more pressure, in others less. kzbin.info/aero/PLkX3qMzwBy1EOnBML1roW5F_CDx3eblWy

[@bpy4073]

@@RUPES Thanks for the comprehensive reply only just learning to polish my car your tutorials are great keep em coming.

[@98JamesNixon]

Would you recommend wiping down the car with a paint prep solution before applying coatings or will it be fine to coat straight after wiping off?

[@RUPES]

We recommend following whatever the coating manufacturer requires/suggests.

[@LockdownDetailing]

Always use a panel prep

[@sebastienderidder5418]

Can I use Uno pure with white rupes pad as a pre-wax cleaner? 3 times a year ... Or is Uno pure not meant for that ? Not strong enough to remove wax.... I used DA fine with yellow foam and wool on my MX-5. This gave great results. I finished with Uno pure and white foam pad and it boosted the gloss immediately!!! Really impressive results with Uno pure. Afterwards I put a soft99 kiwami wax on the car. Therefore my question about Uno pure as a pre wax cleaner. I will have to repeat waxing every 4 months.

[@RUPES]

Thank you for watching and posting a question. Can you? Certainly. Wax is not a very durable surface protectant, so even a very fine abrasive like UNO Pure is capable of removing it from the surface. The issue though, is that is not a very efficient or effective way to remove wax. The process will also load the pad up with the wax that is removed and begin to smear it back onto the surface. The more effective way to remove a wax and prepare a surface is to use a dedicated wax and grease remover such as a prep solvent or even diluted ispropyl alcohol.

[@zzo28]

Wash the car with good dishes washer. It removes old protections well and cheap. Use for example uno pure to cleaning, gloss enhance and very light scratches removing (dont want cut clearcoat 2-4 per year) - Use it like light prewax cleanser. White pad , maybe yellow pad on hard paints. Use prep before wax.

[@biskoit]

Hey there guys! Im a newbie into detailing but it was your kits the first one that i grabbed and started yesterday to polish my car and believe it or not, i took like 3h just to do the hood... My car is on the same color has the one on the video and was painted like 3/4 years ago and had lots and lots of scratches...Start with the yellow pad but it did seem to had any effect on scrachts so i moved into the blue one. Got the work done but had burns from the pad due to the time i took on the panel so i used Pure to remove it and result: shine like a diamond... my question is: after coarse polishing compound or fine polishing compound i should always finish with Pure and then apply my ceramic coating? Or after coarse polishing compound or fine polishing compound if there is any problems can i apply my ceramic coating? Sorry for the long testamonial. Best regards.

[@replacesoundboard]

How does it compare to the Rupes D-A Fine?

[@someusername121]

Is there a max ambient temperature you can use this system in? Like say it's 90 degrees in the garage is that too hot for the foam and polish to work properly?

[@RUPES]

Not necessarily, but you should be making some technique adjustments to compensate for the ambient conditions and reduce the added frictional heat. Lower tool speed, faster arm speed, shorter cycles, and maybe even using slightly more product to keep the surface lubricated will all help in reducing heat in an already heat-saturated environment.

[@jpmcfrosty]

You can also use this pad to lay down a sealant or wax right?

[@RUPES]

Yes - this pad would also be suitable for the application of sealants or waxes

[@jpmcfrosty]

@@RUPES got it, also can compound dust scratch your car? i.e. wiping it off your paint

[@no_lft_shft]

Is it safe to use blue yellow and white in the sun?

[@RUPES]

Any of our compounds would be "safe" to use in direct sun, however you need to adjust technique depending on ambient conditions. Adjustments might include reducing section sizes and cycle times, increasing the amount of compound used, etc.

[@zylbi137]

Hello Rupes team, can i apply the uno pure with the lk900e mille as a finish or would you say its better with the mark III?

[@RUPES]

The UNO family of products is compatible with random orbital, gear-driven orbital, and even rotary. If you are comfortable finishing with the LK900E then it should work find for you. Random orbital tools tend to have an advantage for finishing, but that is not specific to UNO, that is just an advantage of the movement.

[@zylbi137]

@@RUPES Thanks for your fast reply👍🏻👍🏻👍🏻

[@reklessevilkid]

To start my detailing career do you recommend starting with the rupes 21mm or the lhr 15mm mark 3? I just picked up a duetto with the 12mm throw.

[@RUPES]

I’m general the LHR15 tends to be the better option for detailing applications unless you work on a lot of very large vehicles.

[@danlc95]

I usually use the Duetto for my home shop. I'll pull out the LHR21ES for larger body panels, Mini and Nano as needed. At my part time gig I use a 15mm knock off tool (the full time detailer, I only feel he should use the genuine Rupes tools). But I just found a Duetto on ebay for a steal. It will be my third Duetto, and the one I'll be taking to work. The reason is that I prefer that style chassis, and I'm used to the way it handles. I don't mine the 15mm throw, but the Duetto eats the knockoff 15mm too for dinner - even though I really like those knockoff tools, the Rupes all around out performs them.

[@JayPalazzola]

What brand and model gloss meter are you using?

[@The128enlasangre]

Hola se puede usar con otra pad soft? Sonax

[@donaldthomason4588]

Can this be used with pneumatic polisher?

[@RUPES]

Yes as long as it is a dual action movement. So either dual action random orbital or dual action gear driven orbital.

[@donaldthomason4588]

@@RUPES There all Rupes👍😉

[@tommartin1223]

Do u guys sell the device that measures gloss or is that private for your company. If you do sell can we get a link?

[@RUPES]

Sorry, we do not manufacture or sell gloss meters.

[@bluegrasskid4835]

Did that car have extremely soft paint? I would have never guessed Uno on the Ultra Fine White Pad would be able to remove all paint defects.

[@breathlessboarding2791]

Is this setup recommended for a random orbital, or can it be done with a dual action

[@RUPES]

Random orbital is dual action. Our D-A system is designed for any dual action movement, including random orbital and gear driven.

[@breathlessboarding2791]

@@RUPES sorry I should have clarified, I meant gear driven vs. random orbital. Thank you!

[@userofbrain5320]

no IPA wipe after Pure Uno ? straight to the wax?

[@RUPES]

We recommend you follow the manufacturers directions for whatever protective product you choose. The key thing to understand is because UNO Pure is not masking/hiding defects, even if you do a panel prep wipe like alcohol or solvent the finish will look the same because there are no fillers to remove.

[@jcuz8449]

Does this remove holograms because i used stage 1 and stage 2 da fine and da coarse and i recieved holograms and dont know how to remove Them. Please help!

[@RUPES]

Holograms are the result of using a rotary tool, but you indicated you're using our D-A coarse and fine? It really is virtually impossible to create a rotary swirl or hologram with a random orbital polisher. Since there is a lot of missing information from your question please contact us directly so we can exchange pictures and more detailed information to help you find a solution. www.rupes.com/contact-us

[@jcuz8449]

@@RUPES i was using an orbital polisher

[@jcuz8449]

@@RUPES i was using THE tokya op5

[@RUPES]

From a technical standpoint it is impossible to introduce a rotary hologram via dual action because a hologram is caused specifically by the consistent, patterned, repeating movement of a tool like a rotary. Dual-action RANDOM orbital tools have a truly random movement, so there is no repeating scratch pattern to create a hologram. If you have pictures or some way to share the problem you're experiencing with us I recommend you contact us via the contact us page of our website so we can help you troubleshoot the issue.

[@jcuz8449]

@@RUPES i did Contact you guys yesterday but did not recieve any answers on my mail yet

[@brianbiggs3484]

👍👍✌️✌️🇨🇦🇨🇦✌️👍🇨🇦✌️👍