D.I.Y Pond Fibreglass. Easy step by step from start to finish

Feel free to comment below..tips, tricks and errors all welcome.
Swindon Composite supplies
www.swindoncom...
www.ebay.co.uk...

[@Offline955Out]

To be honest from all the videos I have watched on fibreglassing, this is the best and I will no doubt watch again before I do mine. I am still in the design and saving phase 😂. Thank you for taking the time to record and post.

[@AuCeylander]

Thank you so much for giving us a comprehensive DIY fibreglass pond work video which I have been looking for years. Good job mate 👌👌

[@aidandalton7404]

This is me back in 2015. My pond is still running today. Very satisfying to DIY. Top job. Enjoy the fish. 👍

[@standfordkaunda7955]

Thanks I learn something from u

[@mufctillidie8392]

Good video u made that look easy

[@AndysKoiPuddle]

SUPERB job Josh, well done mate. Gives me flash backs to doing mine. It was a first for me too, and I actually enjoyed it to be fair. But I did it over days and days, you may have hit it a lot faster than me…. 👏🏼 👏🏼 I went through a power of rollers…. 😂😂😂 All worth it in the end. 👍🏼

[@TheGingerPondkeeper]

That's pretty impressive for a first go, well done mate 👍

[@grahamparker5129]

You did a very Good Job with the fibreglass, what you did as well mate.

[@LeTwistedOne]

Absolutely fecking awesome job there Brizzle bruva and awesome catching up today 💯👌🧁👍👍👍

[@BrizzleKoi]

Wicked time at twisted towers 👍👍👍😎😎

[@Jiggskoi]

Looking good mate fairplay can't wait to see it finished 😉👌

[@westbromkoi]

Cracking job on the fibreglassing Josh, fair play for having the balls to do it yourself 👌🏼👍🏼

[@BrizzleKoi]

I was terrified about messing it up. Glad I had a go but I wouldn't recommend doing it yourself. If you fuk it up and have to buy all the materials again you may aswell have paid a fibreglassing company to do it. Looking forward to your next update mate

[@westbromkoi]

It's coming tomorrow pal 👍🏼👌🏼

[@PaulMagee-cm2wi]

Great job well done I was watching the twisted one Vince and he mentioned your channel so glad i looked 👍

[@BrizzleKoi]

Thanks for coming..👍👍👍👍

[@SeanRoePatrickMurphy]

this is the most informational clip I have seen ,,well done and thanks from a rookie

[@sweetkoiyo]

The Twisted One sent me. New subscriber 👋 What a beautiful set up. 😊

[@BrizzleKoi]

Thank you..and welcome to the channel 👍👍👍👍👌😎😎

[@honeyyeti5292]

Quality job, well done👍

[@andrewjones7670]

Excellent work, well done mate 👍

[@JamesTHEKOIwhisperer123]

Well done mate fare play doing it yourself and now you have learnt how to do it yourself

[@BrizzleKoi]

Glad I had a go! Now thinking what else I can fibreglass 💪. Big D.I.Y custom fibreglass bog filter maybe. 🔨🔨🔨🔨🐰🐰🐰🐰

[@LeTwistedOne]

​@@BrizzleKoi that'd be awesome Brizzle bruva 💯🧁👍👍👍

[@hertskoi]

nice one bizzle good to see ya have a crack at it

[@darrenhicks1936]

Well done you made that look easy

[@BrizzleKoi]

I cut out the part when all the fibre glass tusse got blown down the garden by the wind. The language wasn't appropriate 😜

[@regkoiDorset]

Great job mate u made it look easy to do.But it is not.i can't wait for the water to go in . then the koi . keep the videos coming mate very interesting.

[@BrizzleKoi]

Thanks mate...I'm looking forward to filling it as well. Still lots to do mind. Take care bud

[@KEITHMARTIN-d2g]

Nice one brizzle. The twisted one sent me.

[@BrizzleKoi]

Welcome 👋👋

[@joycedrinkwater917]

Hi Patrick the twisted one sent me welcome to the koi community

[@BrizzleKoi]

👋👋👋👋

[@jamieskoipond]

Nice one great update.

[@BrizzleKoi]

Thanks Jamie 👍👍

[@chasingkoi]

1st,, for once,, looking good sir,, cheers Terry,

[@richardthurston92]

You made that look do easy respect to you ❤

[@wainyone]

great job, well done

[@BrizzleKoi]

Thank you! Cheers!

[@chrispurnell8399]

Well done mate

[@BrizzleKoi]

👍👍😎

[@Garykoi625]

Good effort, mate 👏 Acetone would have been good to clean your tools, wipeing the muck,dust, etc, off the flowcoat and for cleaning the wife's nail varnish off. I would if you could put a foot of water in to test the bottom drain. 😅 All the best 👍 👌 🐟

[@BrizzleKoi]

Hi Gary 👋. Messy stuff isn't it...Next time I'll definitely have some acetone! I filled with a foot of water last night and marked the waterline with some tape. I'm waiting on the glass window to arrive so I'll check the tape in a few days 🤞

[@adethekoikeeper6505]

Well done done a great job 👏 and that👍

[@BrizzleKoi]

Cheers mate...hope your well bud

[@StokeKoiAdventures]

Cracking job 😊

[@richardthurston92]

Brilliant job mate can you do mine at a cost 🥰🥰🥰

[@andrecrawford5118]

Question, can you do half of the pond and then the other the next day for example? I have a large pond to fibreglass and don’t think I could do it all in one go?

[@BrizzleKoi]

I did it in one...but i know you can do it in stages....better to take your time! Rush and get flustered you've had it! I could have done with some shade...I think the sun made it set too quick

[@Garykoi625]

Nice one mate going to see vince 👍 How's your water levels? Hope there okay 👍 🐟

[@BrizzleKoi]

Just checked....36 hours after filling and it hasn't dropped 👍

[@davidgrogan7541]

what have you used on top for fibre-glass black paint.

[@BrizzleKoi]

@davidgrogan7541 it's called "flow coat" it's basically black fibreglass resin. You have to add catalyst to it before applying. Hope that helps

[@douglassmith215]

How much did it cost to make?

[@Nguyen12121]

How many gallons of Polyester Resin did you use?

[@BrizzleKoi]

@@Nguyen12121 22 litres...I probably should have bought 25 as I cut it really fine and was very close to running out.

[@scottmcwilliams2204]

What type of roller did you use for the resin?

[@BrizzleKoi]

@scottmcwilliams2204 I used cheap paint rollers from b&q...went though 5 or 6 of them if I remember rightly. Then I used a paddle roller to bind the fibres.

[@familycarpfishing3397]

New sub. 😊

[@BrizzleKoi]

Welcome 👋

[@stephencottrell2495]

Essex

[@davidthompson6455]

Top effort , d.i.y fibreglassing, isn't that difficult. It's just common sense , learn how it work as you go along , adjusting catalyst/ batch size you mix up

[@BrizzleKoi]

It's not hard..but I fully understand when it goes wrong...it goes wrong quick! That tissue...ooofff leave that to the professionals!

[@GRPLiningServices]

That comment aged well David.

[@davidthompson6455]

@GRPLiningServices guess I'm not an average D.I.Y. 🤪, second pond no leaks . I watched you early stuff, before you didn't want to show any more how to videos, but I'm glad you did, as it worked for me 🫡

[@GRPLiningServices]

@@davidthompson6455so it’s now common sense and use the advice from a seasoned professional basically poncing information then claiming it was easy. Jesus man.

[@soniafareham3654]

Shame he got all that black shit all over his arm