PCO3 CAREL CONTROLLER INSIDE ARCTI CHILL CHILLER ADDRESS CHANGE & PASSWORD (2)

Must disconnect all communication cables, should only have keypad and power supply connected. Previous video 👇🏻
PCO3 CAREL CONTROLLER ADDRESS CHANGE ARCTI CHILL CHILLER (1) • PCO3 CAREL CONTROLLER ...

[@roopramsoeknandan7601]

I will like to see all your videos

[@D2DNYAC]

Thank you for sticking by

[@louisopinante7637]

Would you also have the password for the PCO1 for older model chiller Excellent video

[@njoamo]

Hello, I have address settings problem with my multistake air cooled chiller slave 1 to 4 . Slave 4 address supposed to be 4 but some how 10.

[@D2DNYAC]

Check on the channels community page first that

[@dancannjeru9318]

Great ....I have an issue with compressor loading,I had power failure in my facility which made temp in the building to raise,when power was restored,the chiller took a decade to load the modules and bring back temp to normal,which settings should I adjust on the chiller to achieve faster cooling.

[@D2DNYAC]

Duncan that’s my name as well 😁

[@D2DNYAC]

If all modules and compressors running the you just have to wait for the load to pull-down

[@dancannjeru9318]

@@D2DNYAC I find it weird because if the Temperatures are high in the building I expect the chiller to load several modules very fast and then unload on achieving demand,on this I've noted even if building temps are high it's so sluggish in loading even the second compressor in one module leave alone commanding another module to kick,do artic modular chiller work this way?

[@D2DNYAC]

It’s called staging

[@edsonlopes3610]

Do u know if is possible I get the software version of the my pco2 microtech Daikin-McQuay for installation in another's pco2?

[@D2DNYAC]

Yes you will a carel pco smart key

[@edsonlopes3610]

Hello please can replace the master pco3 or pco2 by another slave if change dip switches for master ?

[@D2DNYAC]

Not quite sure 😕 however I believe the master is assigned to the pco with the lowest address and address (01) this is set via the keypad

[@vipete1985]

I have the same chiller in my building in Manhattan.Can you send me your contact information if you are familiar with repairing these units?

[@D2DNYAC]

Hi 👋 friend you can Google d2d ny ac a& heating or go here to contact me d2dny.com/ also more contact information in the about section of my channel thank you

[@MuhammadAsim-tr6vw]

I need maintenance and factory password for pCO1...Please if you can help

[@D2DNYAC]

0011 and 2728

[@Cdf_mdl]

Hello Can you help me to solve this error application program corrupted or not present waiting for update

[@D2DNYAC]

No

[@hatimanjari9573]

Hi what is the manufacturing password for carel pco2

[@D2DNYAC]

All depends on the manufacturer using it so it varies !

[@brahimbrahim3827]

. I lost the password. For carel pGD' Please help me find it

[@D2DNYAC]

Try 1234 or 0000 !

[@khalidnisar4440]

Hi, i need password for in/out temp and pressures reading please help me!

[@D2DNYAC]

No password needed to view pressures and temperatures

[@khalidnisar4440]

@@D2DNYAC but here is only show outlet temp in MTA chiller others parameters not showing! please help

[@iansibbert7582]

cheat -

[@D2DNYAC]

1. Get back to the Main screen 📺 FYI the main screen displays the firmware version and it’s date at the bottom 2. Press and hold the water temp and set point keys 🔑 for approximately 10 seconds

[@louisopinante7637]

Cheat

[@ax9823]

cheat

[@D2DNYAC]

1. Get back to the Main screen 📺 FYI the main screen displays the firmware version and it’s date at the bottom 2. Press and hold the water temp and set point keys 🔑 for approximately 10 seconds.

[@markcastro5705]

cheat

[@D2DNYAC]

kzbin.info/www/bejne/i3_El6FtqNpjiLs

[@qaswa2023]

Cheat

[@D2DNYAC]

I just uploaded a video with the cheat instructions

[@jfrancis98]

Cheat

[@D2DNYAC]

Dm me on Instagram and I will share how

[@njoamo]

Cheat

[@D2DNYAC]

Check on my channel community page

[@D2DNYAC]

Check my channel community page

[@Toptech92186]

Cheat

[@D2DNYAC]

Go follow my Instagram and search #d2dnyarctichill

[@D2DNYAC]

Get to the chiller main screen then press buttons water temp and setpoint simultaneously for about 10 seconds this will take you to the factory menu you can then scroll down and view the passwords

[@qaswa2023]

Cheat

[@D2DNYAC]

Are you on Instagram?

[@qaswa2023]

Yes