D51822 Air Nailer Repair

[@jpthedelawarebeeman6239]

I replaced all the seals in mine as well and air was coming out of the front only. What fixed it for you ? Did you replace the seals again ?

[@cdany2000]

Hi , thanks for your great video. Unfortunately even if I have replace white o-rings ( was decomposed too ) with a new o-ring rebuild kit, the air flow continue to exit from front. I replaced also the o-ring at the trigger but same issue. When I open the nailer pump, before I close it, I put the piston at front, when I put the air I can listen the piston back and hit the muffler, the air exit from the front where the nails exit. I dont understand why its happend. The seals are new ... Do you have an idea ?

[@r7boatguy]

Mine was doing that too. I disassembled everything and replaced all the seals and it worked fine afterwards. Make sure you didn't miss one

[@cdany2000]

@@r7boatguy Thanks Anthony

[@ShivaKumar-bb8kh]

Piston ki ring Kari jaati hai uska kya mistake ho sakta hai

[@panchoflores6590]

Did you figure it out?

[@tonyrodriguez849]

I don’t think the top hole is an air port as mine has three screws and I noticed yours has two screws.

[@TheDirtbikerdude]

👍