First video I could find after searching for half an hour on which way that ring is supposed to go inside. Thank you so much!
@daddoesvideos3 жыл бұрын
Glad to hear the video is useful! Thanks for watching. Happy thanksgiving!
@katiebrunelle7366 Жыл бұрын
This was exactly what I needed to see! Helped me finish this project in a jiffy. Thank you!
@daddoesvideos Жыл бұрын
You are welcome! Thanks for watching!
@andrewcannon1854 Жыл бұрын
this is the best video to show how to change a pendent light shade.
@daddoesvideos Жыл бұрын
Well, thank you! Appreciate that. Thank you for stopping by and watching.
@spiritdetective_2 жыл бұрын
Thank you! I was missing the ring part and my brain broke trying to figure out how to convert the shade I got, so this helped 😊
@daddoesvideos2 жыл бұрын
Glad it helped! Thanks for stopping by to watch.
@yaya11511 Жыл бұрын
I'm so happy you have the plastic, easy to reach ring. Mine has a very slim, metal ring and I can't get it to budge.
@daddoesvideos Жыл бұрын
Oh that stinks. Any chance there’s enough room to use some needle nose pliers to try to get the ring off?
@caitlinsevey60373 жыл бұрын
How do you get the ring off if it was put on crooked? We have tried but it just twists the lightbulb socket
@daddoesvideos3 жыл бұрын
Huh. Seems like you should be able to hold the fixture and twist the ring. But hard to say without actually seeing the issue.
@jacquelinenovet Жыл бұрын
Great grandma changes pendant light shade… thank you!
@daddoesvideos Жыл бұрын
Hahaha! Glad it helped!
@suemiller48972 жыл бұрын
Just what I’m looking for…where can you get the new shades…thank you!
@daddoesvideos2 жыл бұрын
Glad it helped! I got the ones in the video from IKEA, but you can get them from a lot of different places. Lowes and Home Depot have a good selection.
@DanNelle2 жыл бұрын
Thank you, very simple and to the point.
@daddoesvideos2 жыл бұрын
Surely! And thank you for watching.
@StayStrong2219 ай бұрын
Thank you! My 2 new vanity light looks amazing. DIY
@daddoesvideos9 ай бұрын
Yes! That’s great to hear!
@emikohikari2 жыл бұрын
I have a lamp that is missing the ring. Do you know if those ring sizes are universal? Thank you
@daddoesvideos2 жыл бұрын
Gosh, I would guess they’d be standard, but I can’t say for sure. Be curious if you find out!
@johndaash3841 Жыл бұрын
Extremely helpful! Thank you, so much!
@daddoesvideos Жыл бұрын
Sure thing. Thanks for stopping by!
@MelMina1442 жыл бұрын
what do I do if the diameter of the pendant shade is too wide causing it to just fall off
@daddoesvideos2 жыл бұрын
Huh. That’s weird. Usually they are a standard size. Are you sure it’s a pendant shade and not something else - like a lamp shade?
@tiffanie.sparrow Жыл бұрын
Exactly what I needed. Thank you!
@daddoesvideos Жыл бұрын
Excellent! Glad it helped you! Thanks for watching.
@jeremypouba802611 ай бұрын
Anyone have any tips on unscrewing that ring? Ours must’ve been factory tightened and the ridges around it barely protrude so I can’t get any sort of grip on it 😅
@daddoesvideos11 ай бұрын
Ugh. That stinks. Is there enough of the ridge sticking out that you can use some needle nose pliers to grab it?
@jeremypouba802611 ай бұрын
@@daddoesvideos nope tried that. Also put electrical tape on my finger tips trying to get grip hahah Finally got it after holding the base of the fixture and carefully twisting the shade itself. That loosened the seal of the ring, then I was able to unscrew the ring *phew* Harder than it had to be! Haha
@daddoesvideos11 ай бұрын
@@jeremypouba8026 oh nice! Glad you eventually figured out a solution!
@shmeckawestley63045 ай бұрын
What tool you used to unscrew the nut
@daddoesvideos5 ай бұрын
Hi there! You shouldn’t need one. Should just be able to use your fingers. But a pair of needle nose pliers or something similar could work if the nut is a bit stuck.
@annmarshall4622 Жыл бұрын
Stage one switch off the electricity supply 😅
@daddoesvideos Жыл бұрын
Never a bad idea. Lol.
@claymarp.75183 жыл бұрын
Can I do this if my current light fixture have 3 lights?
@daddoesvideos3 жыл бұрын
Typically the replacement pendant lights are used instead of recessed down lights. The retrofit pendant screws into the same place the flood light would go in those cans. If you are asking whether you can use the glass shades or pendant shades in another light fixture that has three pendants, I don’t see why not assuming the lights have the right setup so the shades lock in the right way.
@kankan5723 жыл бұрын
The link is showing they don’t have the pendant shades anymore 😭 I want one so bad!!!!
@daddoesvideos3 жыл бұрын
Aw man. Yeh. Guess they don’t sell them anymore? Boo!
@beckysimpson33643 жыл бұрын
Those rings inside the glass shade are the most difficult thing to unscrew. I hate them and I'm having a hard time finding a shade that has knurled nuts instead.
@daddoesvideos3 жыл бұрын
True. They are a bit challenging. I’m not a fan either.
@candacec64272 жыл бұрын
Someone put ring on backwards how do I remove it if can't get a hold of it?
@daddoesvideos2 жыл бұрын
Hey there. What do you mean when you say it’s on backwards? Like it’s upside down?
@candacec64272 жыл бұрын
@@daddoesvideos yes exactly. And it's screwed up tight.
@daddoesvideos2 жыл бұрын
@@candacec6427 Ok. Can you remove the light bulb? Does that help you at least get access to the ring?
@candacec64272 жыл бұрын
@@daddoesvideos yes light bulb removed but still can't get grip on ring
@candacec64272 жыл бұрын
I'm gonna try plyers.
@catdookie11 ай бұрын
Thanks dad
@daddoesvideos11 ай бұрын
You are very welcome!
@kenyasmith43622 жыл бұрын
Does the ring size matter
@daddoesvideos2 жыл бұрын
Hey there. They are a standard size.
@victoriasweet78703 жыл бұрын
Easy peasy. Thank you!
@daddoesvideos3 жыл бұрын
Thanks for watching!
@beckysimpson33643 жыл бұрын
Yeah, easy because he skipped the difficult parts of unscrewing the little metal ring inside the shade. They need to make a tool to use to unscrew those.
@ashleymonaco19353 жыл бұрын
How do you measure to replace a shade?
@daddoesvideos3 жыл бұрын
Hi. Typically, all the pendant shades have the same size opening on top. So, unless you have a different set up, it shouldn’t matter. Worst case, you return what you bought and get the right size.