Daihatsu Mira Boosted EJDE 1L 3cyl Build - PART 4

[@nortarmizietujudin3521]

Malaysian k-car fans.. I'm also own this this 660 engine but already swap with 1ltr EJDE turbo then I swap with TDOL turbo.. nice

[@Billystan]

You can try using Nissan march piston (72mm just plug n play) or (73mm need to rebore)..The pin size 18mm is similar to the stock one no worries...For turbo setup try using TD04L from subaru

[@kathyshobbies4776]

Good job, really liked the music

[@Jakey032]

thanks :)

[@nizamshah9753]

Hi, may I know how much the NM torque to tighten the mainbearing and conrod bearing?

[@Jakey032]

bearing cap - 59.0 ± 6.0 rod cap - 36.0 ± 6.0 pro.daihatsu.fr/Daihatsu/SAV/TECHNIQUE/MANUELS%20ATELIER/SIRION%20M100/9726/EM.PDF

[@nizamshah9753]

@@Jakey032 tq very much bro

[@ewrnew]

Jakey, I just bought on Feb 21, 2022, a 2000 Daihatsu. the car does not have a Vin number all I have is the engine Chasis which is # M100S-013064, TYPE: GF-M100S -GPNF, Engine: EJ-DE, 989cc, Trim: F AS6. I checked everywhere on the web-based on the Chasis number but I did not find anything. I would like to know that is model, the specifications of the car. in order for me to buy all the parts the car needs. I am located in the Dominican Republic, thanks

[@Jakey032]

M100 Is Daihatsu Sirion. Hope this helps?

[@vanogroznyy2641]

Hi. How long is the engine mileage before repair?

[@Jakey032]

honestly I'm not entirely sure. but I think it's abit over 200k kms

[@danielcooper8426]

Going to be a weapon !

[@yuzeiryyusuf]

Hi, what piston are you using? Did you lower the compression ratio by just grind off the extra material in the head or with thicker head gasket too?

[@Jakey032]

standard piston. With the compression I didn't intend to lower it in purpose it will just be a result of the chamber shape change.

[@charliesubaru0424]

@@Jakey032 Can use nissan march 73mm if you wanna bolt on turbo.