DAILY DRIVER CAMMED 5.3 AFTER 2 YEARS! | GOOD & BAD |

[@seanthomas8487]

Please don't ever sell chomper

[@BradleyBruening]

He won’t sell it, he said the 2 trucks he would never sell is chomper and Larry

[@dakotarinehart5388]

This truck inspired me to put a Chopocobra in my 6.2, I ended up going with a 2800 stall converter, my truck rips way harder now with the cam, gonna do 3.73 gears and smaller tires this winter, excited to have a race truck. Glad yours has been just as reliable as mine (I love chomper)

[@Koenackman]

I think since he always has big tires on his I think a 2800-3000 stall and 4.56s would be the move for his truck

[@vanity6554]

I love your vids! Chomper made me fall in love with gmt 800s

[@xxSPENCER509xx]

You're definitely spot on with the gearing for these trucks. One thing I will add that is killing your power is having a stock converter in it. I have a 2000 silverado 1500 4x4 that's built to the hilt. It came from the factory with 4.10s, luckily. I have a FTI 2800 stall converter in my 700whp capable Performabuilt 4l60e. The motor is a stock crank, bored .30 over block with flat top pistons running 10.5-1 compression, Texas Speed stage 4 truck cam and a set of nasty 220cc PRC heads with a TBSS intake manifold. Im running 1 3/4" long tube headers with 3" dual exhaust with an x-pipe into 2 Borla XR1's. My rig made 340whp on the dyno through 33s and a worn out 200k mile transfer case being very conservative on the tune. My truck rips but I can watch the fuel guage move when I stomp it. Don't expect to get good fuel economy with a built truck lol

[@Lsx-Brandon]

Got a bone stock gmt900 in Highschool, i cammed it, put on headers/exhuast, changed the converter for a 2k stall. With the 6l80 I can run 4.30 gears with 22's and low pros and still run 85 mph below 2300. Also dorman makes a aluminum coolant cross over pipe for the one thats leaking on yours. Took me 15 minutes to change it form hood open to closed

[@zachtaylor48]

Always enjoy every time you drop a video when I’m bored

[@lmfscrew]

I’m gonna take that as a compliment 😅

[@kobehargest]

Chomper needs a 6.0 or 6.2. Feel like you'd fall in love with it all over again.

[@johnjack8195]

A swap video in the shop would be fire too sounds like a win win

[@FriesenHQ]

love it. i got a 06 cateye with 230/243, .592/.610 112 lsa cam from summit racing. it's their discontinued truck cam and I love it! sounds freakin amazing. I need to go back amd look at your exhaust video for chomper it sounds soooo good brotha

[@mikeloper2381]

Love that truck! I have an 02 short bed 2wd Silverado, with a rebuilt 5.3, same cam as yours, PRC heads from Texas speed and a LSA supercharger on top! I love it and it runs great! Really enjoy your videos! Thanks!

[@isaiahagee1495]

I'm planning on cam swapping to a 292h comp camp in my 98 gmc k1500. You cam swapping truck makes me want to try it lol

[@samcox7105]

I love all these chopper videos right after I get my 03 cateye back from getting cammed like literally 2 days ago😂

[@pat14lang]

Planing to cam my ‘17 with a BTR stage 2 truck cam and a couple upgrades to go along with it. Going to install 4.56 gears to help turn the 35’s I have also

[@clardy01]

Just ordered my angry elf/chopacobra cam yesterday! Hope to get my 05 Silverado sounding as good as yours next year! Oh and Merry Christmas to you and your family!

[@GavinBose]

I’m about to buy the same cam what exhaust setup are you running

[@clardy01]

@ right now I’ve got corsa, with dual out the back, looking to get the speed engineering long tubes soon as well.

[@bradleyflood5437]

I’m am in process of manual swapping my 2005 4x4 Tahoe and a cam will be next for sure

[@TravisShramek]

Love those wheel on Chomper! I have an 07 that I’m in the process of doin the Dod delete with a TSP Stage 2 cam

[@austinhernandez6970]

I have a 06 cateye and I plan on doing a cam and tune and dynomax bullets with carven tips. That’s the plans but also love chomper and Larry

[@PhillipMyers04]

Chompers still my favorite on the channel lol. Probably always will be

[@chazrichoux8162]

Put the choppacobra cam in the v max with the procharger.

[@Chevywhoopwhoop]

I have a 6.0L 2500hd 2011 And man if i put the work in like you bro i bet the chop will be like yours bro bro Great content 🤙🏽

[@jimmysmith230]

Great truck I have a 2005 avalanche that I bought two years old with only 100,000 miles on it. IT'S a garage queen but I would love to do mine like yours thanks for the content.

[@PrincessAddie14]

Lol

[@luisesc2305]

Any oil spots on the engine?? Everything holding up well?

[@Silver12LTZ]

Mud grappler time for Chomper, been too long

[@huntermonceret9183]

Badass truck. 💯💯

[@dannypatrick6262]

I have camed my truck is the twin to chopper. I went with the truck Norris cam. Did valve springs push rods lifters the whole 9 yards been pretty good to me so far and I put long two headers on it with 2 1/2 inch pipe into a dual in dual out, black widow, angry housewife, muffler she is loud lol

[@chazrichoux8162]

Long tube headers kill starters, heat wrap your headers by the starter.

[@jordanhannah5839]

Great video!

[@cyclonekevin6199]

Chopper looking nd sound goods

[@DeadVersiontv]

Does anyone know what rims they are I’m wanting to order a set for my cat eye and I can’t find them?

[@ConRad-s5z]

Have an 11 avalanche with a truck Norris cam! Love it! True dual straight pipe, no headers yet! But more coming in the summer! Don’t ever sell that truck! 😂❤

[@kylehickmon]

Where’d you get your headliner at and choppers

[@iangillis4495]

I have a 03 suburban with a BTR Stage 2 truck cam. Catless with super10 flow master. Definitely wish I had went with a stage 3 instead

[@baileyhale5739]

What turn signals you running?

[@darrencampbell6367]

What tune are you running? I have the same headers and an exhaust

[@98wytebird]

On my 06 I was having starter issues where sometimes it would click and then start.....come to find out the starter just had a loose connection so may be your problem

[@davidsims7619]

Merry Christmas to you and your family. See you in 2025. 🎉

[@Stickylsx]

I just picked up a black 06 sierra single cab basically a baby chomper! I wanna go tsp or btr truck norris!

[@bdtaylor1979]

I had an issue on a Silverado where it wouldn’t start sometimes, I changed the starter relay and never had any issues again.

[@98wytebird]

Why not go with a higher stall converter even if its the 2600 trailblazer one and fairly cheap.. I run a circle D 3000 in mine

[@Ivanrparrigin]

Certain gmt800 avalanches and z71 suburbans had factory 4.10 gears that would make for an easier front end gear swap

[@cltholen]

What gears currently?

[@zacharywood7328]

Check out Glenn’s auto performance for that coolant hose there’s does away with that plastic y fitting I got one on my 04 and it’s been solid

[@regism87]

I plan on camming, not sure what to get yet though

[@ronnxllganginx5905]

Are the subs still in chomper?

[@justynporter5721]

What number casting heads does it have

[@exsampel]

Maaaaaaaaan why’s the plan with the old vortec max just the charger or we thinking a cam in the future too

[@fatboigames8516]

my 99 silverado round body has unknown mods pushes through the brakes and stalls alot 4x4 and it rips but recently dropped 2 lifters so i can see whats done to it when i pull the motor in a few weeks

[@ZacharyGraham-i9t]

Lmfscrew . Hi i’m Zakk i have a 06silverado 4wheel drive extended cab and my starter grinds when i try to start it can you please tell me what’s wrong with it ? or do you know what’s going on with it ? I’ve had to put 4 starters in that truck 0:02

[@clardy01]

Might have some bad teeth on the flywheel, or may need to shim the started to mesh better. I’d start there.

[@ZacharyGraham-i9t]

⁠@@clardy01 I’ve put shims in it when i put the starter in

[@cwilliams855]

Which intake is that sir?

[@aljalacollins]

Why didn’t you put the pro charger on chomper that would have been sick

[@elierrodriguez7293]

Vmax is the one thats was ment to be procharged since its 6.0 factory and 4wd

[@craigtomczyk3452]

Look into 6L80e swaps.

[@Brody-u7z]

Love chomped but I miss big betty

[@DatdudeTi]

Need to do the Nissan titan rear glass

[@niccdavis2041]

I love tht truck

[@joshuacook8006]

Should look at electric fans for chomper

[@EastSideAlexx]

Nah fr

[@jacobn3160]

It already has e-fans from the factory

[@colyntenny3592]

I’ve got a 1994 Chevy Silverado and I wanna put a mutha thumpr cam in it from comp cams

[@803singlecab]

4:10 gears next

[@sp1der2king2k7]

Supercharge The Truck!!!!

[@tonycampbell9797]

More Larry content

[@bryonaderhold2009]

You should do bucket seats in the back

[@bharles4479]

Not when you got little ones, just not feasible. Could be, but the bench is better for the family

[@FishingWithJameson1712]

First 😲