Daisy Winchester Model 11 CO2 With Blowback (Review + Firing)

I decided to do a review of an older gun since most reviews lacked decent quality firing footage.

[@Lej_A.04]

i've had mine aproximately for three years still works as well as on the first day.

[@Lej_A.04]

made in japan benefits

[@BackyardDispatcher]

mines made in ARK USA

[@jeremynoakes]

@@BackyardDispatcher The other side. Says made in Japan . I just got one a few hours ago up here in Canada . That made it a selling feature that it’s not made in China but Japan Cheers

[@PoppaTrunk007]

Very fun gun . First gen had problems with the tanks leaking due to a small ring that would go bad on the gun where to tip was on the co2 cartridge. I found out using plumbing tape to fix this problem

[@reptilionsarehere]

First gen, you say? So, it's not a problem anymore, then? I've seen multiple people complain that they haven't been able to put the CO2 in properly sometimes, and it all leaks out, but I don't remember how old the comments were.

[@RomanLasarte]

Thank you so much! To change the gaz was not easy before because in the shop they showed me a different kind where I always lost 1-2 gaz-patrons(I don't know if you tell it in english "gaz-patrons") With your kind it's easy! Thank you so much!!!👍👍👍👍🤗

[@Madman117KL]

I got this gun yesterday for my birthday and I love it it’s amazing!

[@The_village_idiot182]

ive got one too

[@Jorgos4]

Does it look real?

[@mepsylon]

Where did you get it?

[@exabys]

@@Jorgos4 no it doesn’t. It’s made of cake. And it’s actually an illusion

[@ilijabosnjak76]

@@exabys 😂😂😂you trying to be funny Fokker 😂,,, I don’t blame you Bro 😎 it’s a nice gun,3 loads and you are out of air, but that’s fine, I just ordered Springfield 1911 Mil Spec and Beeman P17,,,my Visa and Bank 🏦 is gonna kill me 😂,please tell me that I am not insane in the membrane 😂 as this addiction for Air Guns and Pistols is getting out of hand,,,literally!!! Now I Dr. Dree,and Snoop rapping 😂…

[@muskoka91]

better pick one up soon before they're banned in canada

[@ODD31music]

I bought one soon as I read this comment lol

[@matrox]

Canada trying to take away all your rights, trying in the US too but its back firing. Peeps rising up. Traitors will be hanged and jailed when its over.

[@Nick_playz92]

​@ODD31music there still not banned 😂 and its cheaper to

[@robertktmguypigatto]

Are they actually banned in Canada yet?

[@Nick_playz92]

@@robertktmguypigatto no

[@ozzie444]

Not bad. Seems pretty accurate, ya know.

[@beatsbyteflon5566]

😂

[@Curtoise]

Good video. Thanks for sharing. Was trying I figure out how loud it is and this video helped!

[@michael1234144]

Welcome buddy

[@Goomba_N64]

I has this bb gun for a few years but the hammer got stuck to the rear. So it was done. I really liked it so I might have to buy another one.

[@riskonrust]

Mine is doing the same the hammer is stuck how do I fix it?

[@Goomba_N64]

@@riskonrust honestly idk I tried everything. That's why I gave up and will just buy another one some day

[@IBORTAD]

Shame after the first use the hammer remains in the rear position. Stuck. F$:k

[@ogpinkkush9987]

@@IBORTADguys i found the fix

[@ogpinkkush9987]

@@Goomba_N64 ik the fix if u still need it

[@bigmarkthe1]

Went n got mine

[@Jwnsshdjejjqjwj]

im getting the same one on thursday so will see how good it is

[@IBORTAD]

Mine the hammer got stuck in its rear position. Anything you might suggest to fix this issue. Otherwise a fine co2 pistol.

[@ogpinkkush9987]

same bro lmk if u find out how to fix that other than the hammer stuck back it still shoots but just got ts today

[@ogpinkkush9987]

i fixed it ( just drop the mag put a thumb on the hammer and hold the trigger while still holding the hammer and slowly release it should go back )

[@ilijabosnjak76]

One month later 😂: ❤This gun is awesome, I changed ammo to Black Widow 🎉and it’s a Daisy 😂 did anyone notice when pop open for cartridge ,the handle scale pops out just a little bit so you don’t need anything to pop it to open..If you can even find and afford this gun,get it,it’s not cheap I paid about $160 CDN pesos and that’s a lot of money…

[@ironman4056]

It’s a metal or plastic

[@ilijabosnjak76]

@Iron man The gun 🔫 😎 itself is full metal except the grips and somebody said chopstick mag 😆 which is high quality grade plastic, so far it's excellent, specially when you don't need any tools for co2 cartridge, I like the loading system

[@matrox]

@@ironman4056 It's a metal.

[@mrg00077]

Hi. Great video. Can you please tell me how can I remove the silencer small cylinder that remains after I take off the silencer. Thank you. It much appreciated 🙏

[@chapstickgang9264]

Thx you helped me diside if I should buy it or not

[@ryansumners3153]

I had that same model and I can tell you if you accidentally drop it from about chest high on the ground it will blow the CO2 valves out, so be careful it doesn't take much to break it.

[@michael1234144]

Can't say I've had the same problem, I've had butter fingers a few times and it's still fine. Could be luck, good on my part or bad on yours.

[@Yo-kx2xp]

Thank you for this it was helpful

[@michael1234144]

No sweat buddy, hope you got it all sorted.

[@kage_tactical]

Is the trigger hard to pull? If not, can it be bump fired?

[@cameron9322]

no it’s really light

[@SkuCrusher-bi3qf]

I just got this, brand new, and it likes to shoot slightly up and to the right of the sights, it's honestly annoying and Idk what to do now. Probably cant take it back, got the tiniest scratch and I don't have the plastic packaging anymore.

[@148.Thomas]

Mine does the same thing after about 20 ft I have to aim below what I’m shooting at

[@kage_tactical]

I practice dry firing with my airsoft pistol in which the trigger is a little hard to pull.

[@michael1234144]

I find it fairly easy to use. You can empty it in a split if you're tryin.

[@kage_tactical]

I will try that pistol

[@ironman4056]

@@michael1234144 It’s a metal or plastic

[@matrox]

@@ironman4056 It's a metal.

[@AimBitX]

How heavy is the trigger pull, what’s the fastest rate of fire you can do

[@michael1234144]

It feels pretty resistant. You can fire it pretty fast but it doesn't have enough kick to bump fire. Accuracy at high rate is the issue.

[@AimBitX]

@@michael1234144 ok thank you

[@ODD31music]

I love this bb gun!!

[@erichalstead8135]

Why didn’t you take out the es tag inside the handle?

[@Dk.Phanzo]

My co2 pin is leaking. Any ways to repair it?

[@mr.unoriginal5674]

Doing some research on this as my gf wants to grab it for my birthday I'm wondering if there is anything major that would be a turn away from this peice

[@michael1234144]

As long as you maintain it with some mineral oil (the safety and the slide) it'll work and stay operational with no question, although that is just regular maintenance haha

[@matrox]

I put well over 1000 rounds through mine so far. Operates like new.

[@zy_zir]

just bought it and never even used it and the slide gets stuck don't buy this piece of trash I don't understand how everyone else is saying good things about it, mine doesn't even cock properly

[@spookyml9537]

Just bought this it’s great I already have a problem with the stop lever plz lemme how to fix if you know how to

[@michael1234144]

The stop lever? You mean the slide release or the hammer? When you want to put the slide forward and the hammer forward together to you need to hold the trigger while pulling down the slide release and the hammer will go up too. I hope thats what you meant

[@zy_zir]

@@michael1234144 does the mechanism not work if you don't have ammo and/or co2 in it? i was only able to get the gun and have to wait til next week to get the BBs and co2 cartridges because I didn't have enough money and I tried dry firing it and it doesn't work the way it does in this video the slide just gets stuck back and then I have to make it go forward manually and then after I pull the trigger once it un-cocks itself

[@matrox]

I have this weapon. Its good.

[@ironman4056]

It’s a metal or plastic

[@ironman4056]

@michealcrocker It’s a metal or plastic

[@matrox]

cold steel.

[@tanulubana153]

How to load pellets in magazine

[@nothingheretowatch7371]

How much does it cost?

[@Thunderdome76]

the spring sucks. wish I could replace it with a better one?

[@michael1234144]

I don't find it that bad but what i do find a little lackluster is the fitment of the slide action.

[@Poopyhdhdbs]

What kind of co2 tank does it take ?

[@michael1234144]

Just the standard co2 cartridges for airsoft, 12g I believe

[@josephgrahm4713]

CaN you make this auto?

[@exabys]

You think this will work for big hands?

[@michael1234144]

My hands are enormous, so just pay attention to how it fits mine

[@Mussen00]

My magazine keeps falling out what should I do

[@michael1234144]

Not sure if you should or can, but you could try taking a piece of Scotch tape and putting it around the base of the magazine where it fits into the gun, might make it snug enough to stay in. I haven't had that issue!

[@ilijabosnjak76]

I thought it was 1911 RAC but when I found out it’s made in Japan I took it anyway

[@kyles5513]

Sounded like hunter s thompson was doing this review.

[@SteveTappin-o7j]

Newfoundland I presume it’s a nice one got a few myself Umarex included .

[@michael1234144]

Heck yeah

[@akellez24]

How do I install the tank without it blowing up?

[@michael1234144]

Blowing up?

[@oosthuizen2012]

Damn this happens to me too

[@Stephensorzano]

Where can I get more mags?

[@BackyardDispatcher]

amazon

[@rahulroygbr072]

Yeah kaha se order kiya hai

[@rahulroygbr072]

Nice video

[@nathanielskolnick8517]

Nice gun

[@Gabrie-tq7pu]

Me podrias conseguir el cargador para esrcmodelo tengo la misma pidtola pero me ha sido impofsible conseguir su cargador

[@matrox]

Damn right!

[@you-gy3no]

how many rounds will one co2 last?

[@akellez24]

32 to 48 rounds.

[@IBORTAD]

I read 150 plus minus.

[@Reviewerhn]

I get 64 shots with full blowback action, then you can get 15/20 More manually cocking the hammer before you need to replace the CO2 cartridge

[@arturk2021]

Hi Good idea Winchester PCP 16J Strong Blow Back 4,5 18BB Full metal Regards Artur Poland

[@malelikale5008]

How do you take the gun apart?

[@michael1234144]

I haven't tried. Is there a reason why you'd want to do that?

[@airingtonjesse6691]

basically comes apart like a real 1911 other then the bb internals havent gone that far i to taking it apart because of it

[@Prod.Datboi]

@@michael1234144 to clean it

[@Goomba_N64]

@@michael1234144 yeah because the hammer can get stuck.

[@Goomba_N64]

@@airingtonjesse6691 it definitely does not come apart like a normal 1911 you gotta use tools and unscrew some stuff

[@michaelsullivan3480]

Wasted 2 cartridges can someone help?

[@michael1234144]

Whats the issue?

[@michaelsullivan3480]

@@michael1234144 I keep trying to put C02 in but it just punctures it and it all instantly spews out.

[@michael1234144]

@@michaelsullivan3480 tip the gun so the tank is pointing downwards, make sure the tank is properly seated into the valve that punctures it. The trick is to give it one big crank like I show in the video and get it all the way up before any leaks out. It is highly compressed air so even a second or two of leaking will drastically reduce how many high power shots you'll put out.

[@michaelsullivan3480]

@@michael1234144 ok sounds good. How much force do you have to use to crank it. Mine takes a lot and then still all leaks our

[@michael1234144]

@@michaelsullivan3480 don't be afraid to give it a good yank lol you won't break it like that. All those pieces are solid metal.

[@trentgallant5979]

Does anyone know where I can buy a replacement magazine for this?

[@michael1234144]

Amazon!

[@matthewstout6798]

eBay it’s like 55 dollars which is not that bad for a co2 pistol

[@gispechy]

Nice

[@nassa5367]

Can I kill small game animals with it?

[@ajayjobanbhatti]

No you should get a air pistol or rifle if you can

[@nassa5367]

@@ajayjobanbhatti hasn't this an Air pistol 🤨

[@ajayjobanbhatti]

@@nassa5367 but it does not shoot pellets the bbs will just bounce off animals

[@nassa5367]

@@ajayjobanbhatti ahh alright thank you

[@allhailveshremy6563]

@@ajayjobanbhatti actually I had one of these and I killed a lot of gofers and squirrels with it

[@charlescook9841]

Love it❤.D

[@gigachad9389]

It’s a good gun but make sure you take care of it or it will explode due to not cleaning cuz that happened to mine

[@kanarimentos7056]

can you kill raccoon with this gun

[@matrox]

Don't try, you will just maim it. Will probably lodge a round 3- 5" inches into him. If it dosent hit a vital organ he will just be suffering. A .22 will go in and out of a racoon and kill it instantly.

[@CurtisMckort]

$150

[@todoada9046]

この割り箸マガジンはちょっと悲しい

[@ilijabosnjak76]

😂😂😂❤❤❤ it’s not that bad bro

[@Yurmumma]

Why you be holding the trigger down until you here a hit? Pull trigger, then release right after, it literally irritates me hearing your finger pull off the trigger to reset it after hearing a hit , it should be quick

[@michael1234144]

You can instruct people without being a priss. I don't know much about any kind of guns, I'm just reviewing it so others can see it's functionality before buying.

[@Yurmumma]

@@michael1234144 Then maybe it'd be a good idea to learn what your teaching/showing, that all , However its a very long lasting, great looking pellet gun and price is decent for what your get

[@matrox]

@@Yurmumma

[@jodyholcomb3738]

Look like the spring field CO2.177 pistel gun blow back

[@ffernandezmoreno72]

Puedes tirar de la corredera para recargarla o no se puede saludos!!!

[@Reviewerhn]

Si