How to safely use angle grinder with proper safety | Angle grinder safety training

[@ashfakvohra9913]

बहुत ही सुन्दर तरीके से आपने एंगल ग्राइनडर की जानकारी दी है

[@DakshuTechnoTips]

Dhayawad !!

[@krishnakunj6133]

सर आपने जो जानकारी दी वह 100 % सही है मै खुद 11 साल से Grinder use करता हुं सही जानकारी के लिए 🙏🙏🙏

[@DakshuTechnoTips]

Aapka bahut bahut Dhanyawad !!

[@ramachandrapai4654]

2 years back I went to buy a angle grinder. After knowing it is for wood cutting, dealer refused to sell me the grinder and recommended to buy hand saw. I bought hand saw. Now I understand the exact reason for not to be used for wood cutting. Extremely grateful for the explanation.

[@DakshuTechnoTips]

Most Welcome !!

[@vasu615]

You should not use wood cutting blades on Angle Grinder. A powerful kick will damage your any part of your body. Any how you realized it. Thanks for your exposing your bad experience.

[@M.Das90]

@@ramachandrapai4654 Dealer is good person also, most of shop or dealer no matter what is happening to you after buy a machine. Only money matter

[@sagaronline265]

@@vasu615 v cant cut wood with angle grinder? not even plywood? plz answer.

[@babubisleri75]

​@@sagaronline265 there's a different machine for wood cutting

[@ChaudhariPowerTools]

बहुत ही सटीक जानकारी दिया आपने और इस जानकारी को सभी को होना बहुत जरूरी है जो लोग भी पावर टूल्स का आइटम यूज करते हैं मैंने तो आप का वीडियो देखा और मेरा दिल खुश हो गया

[@DakshuTechnoTips]

Aapka bahut bahut dhanyawad 🙏🙏

[@satendrasinghrana4721]

आप ने बहुत ही सरल और मधुर शब्दो मे गलाइण्डर इस्तेमाल करने की बहुत ही सुन्दर जानकारिया दी जो बहुत ही महत्वपूर्ण हैआपने अपने पिताजी के बारे मे दुर्घटना के बारे मे बताया जिन्हे 40 साल से ज्यादा समय से इस कार्य कर रहे थे लगता है कि इस मशीन पर कार्य करने वाला आप के दिशा निर्देशो के अनुरंप कार्य करे तो सुरछिक्त रह सकता है

[@Amitkumar-pr7ko]

बहुत ही महत्वपूर्ण जानकारी दी है आपने, क्योंकि मैं भी एक मिस्त्री को जानता हूं जो की अपनी एक आंख खो चुका है, परंतु वो पत्थर काटने वाली मशीन चला रहा था और ब्लेड टूट कर सीधा उसकी एक आंख में अंदर तक घुस गया था। इसलिए इन पावर स्पीड वाली मशीनों को चलाते समय बहुत ही ध्यान रखना चाहिए।

[@DakshuTechnoTips]

Dhanyawad, jankari saja karne ke liye !!

[@SanjeevSingh-ug7df]

Sir ji meri ankh ko b hit kia tha pr thik ho gai iron pipe kat rha tha

[@Rajiv4367]

🥺🥺🥺🥺🥺🥺bahut dangerous h

[@vishveshchodhary194]

😅

[@vijaychaudhary6102]

Most dangerous hand tool for novice.

[@surendrasharma645]

आपने सुरक्षा और सावधानी बहुत अच्छे तरीके से बताया। धन्यवाद

[@DakshuTechnoTips]

Thanks !!

[@abrehman.ab.rehman5562]

Sir aap keval ek ustad hi nahein balki zindagi ko sahi disha main lejaney k mahir hein.I appreciate you sir

[@DakshuTechnoTips]

Thanks

[@sandeepgupta6526]

ग्राइंडर के बारे में आपने बहुत अच्छी जानकारी दी हम भी कभी-कभी उसे करते हैं आज के बाद आपकी बताई गई सभी टिप्स फॉलो करेंगे थैंक यू

[@raufbaheruni]

सर बहुत ही काम की वीडियो बनाई है आपने बहुत ही अच्छे से समझने की पुरी कोसिस की हे Good information ℹ️ sir आपके वीडियो देखने से कुछ न कुछ सीखने को मिलता है

[@DakshuTechnoTips]

Dhanyawad !!

[@balakrishnamurthy619]

Thank u very much. I am 70+ now. I have never worked with Angle grinder. Now I have purchased Bosch Angle grinder. Your video is really knowledgeable.

[@DakshuTechnoTips]

You are most welcome

[@amitu6570]

Highly important video... even for seasoned professionals who have learned using grinder n other tools from their seniors but don't know the basic principles. Keep up the good work 👏👏👏👏👏

[@DakshuTechnoTips]

Thanks for such a motivational comment !!

[@tahirmetrotahirmetro7186]

​@@DakshuTechnoTipssh in

[@SanjeevSingh-ug7df]

Sir meri ankho mai iron hit hua tha grinder ke sath

[@ranasingh6429]

ਬਹੁਤ ਹੀ ਵਧੀਆ ਜਾਨਕਾਰੀ ਦਿੱਤੀ ਹੈ ਜੀ ਬਹੁਤ ਬਹੁਤ ਧੰਨਵਾਦ ਜੀ।

[@virendrasinghsejwal-hu6dh]

Main home use ke liye grinder kharidna wala tha lekin ab aapka video dekhar irada badal liya. Thanks for your valuable info. Feel sad for your father.

[@AshokKumar-sr2xj]

you have given the most Perfect and excellent knowledge based on experience. THANKS AGAIN and AGAIN.

[@DakshuTechnoTips]

My pleasure! Thanks

[@abrehman.ab.rehman5562]

Sir aap ka bahut bahut shukria ki aap ny hamein ek ustad sy bhi achhi jankari dekar az had khush kar diya.God bless you and your whole family too.

[@DakshuTechnoTips]

🙏🙏

[@narpatshekhawat3892]

धन्यवाद टूल्स गुरुजी। सुन्दर ,उपयोगी जानकारी बताने के लिए।

[@aazadmattressfactoryazadga8495]

Bahot sahi topic par video banaya sir aap ka bahot shukriya kisi bhi machine ka use karne se pahle us ki sahi information hona bahot zaroori hai.

[@DakshuTechnoTips]

Dhanyawad !!

[@tomjoseph815]

That was a complete guide. I was searching several sites and this video was a one shop solution. Thank you👏👏🙏

[@samudraceline9532]

I have seen the angle grinder used all around me for decades as if it was a toy and the very real dangers and the small details of proper use never once occurred to me despite being a graduate mechanical engineer. I recently bought this for home use and was just browsing the you Tube when I came across your video quite by accident. This was God send. Thank you.

[@DakshuTechnoTips]

Thanks a lot and welcome 🙏🙏

[@anilpatel1398]

Very good information

[@DakshuTechnoTips]

Thanks

[@chitrangartist7433]

बहुत बहुत शुक्रिया सर आपने बहुत बारीकी से एंगल मशीन और वुड कटर के बारे में बताया मुझे इसके बारे में पहले कुछ नहीं पता था आपकी बात से मुझे बहुत कुछ सीख मिला है आपकी सभी वीडियो बहुतअच्छे हैं❤❤❤❤ thank you sir

[@DakshuTechnoTips]

Thanks and welcome

[@shivsharankurmi9041]

नमस्ते। साहब जी इतनी सटीक जानकारी देने के लिए आपका बहुत बहुत धन्यवाद।

[@DakshuTechnoTips]

Aapka swagat hai !!

[@neelkirans]

You perfectly explained all the terms and possibilities of what could happen while handling the angle grinders. I want to work with some plywood, like cutting and sanding. Could you tell me which tool I should purchase? Please guide me.

[@rajendrabajracharya6301]

Super like बहुत अच्छी ज्ञान प्राप्त हुवा

[@DakshuTechnoTips]

Dhanyawad 🙏🙏

[@Sarthaksolars]

बहुत ही सार्थक और जरूरी जानकारी दी आपने sir, Salute....

[@DakshuTechnoTips]

Dhanyawad !!

[@dmystique]

What lovely information....straight simple and and to the point explanation... blessing for beginners.. subscribed without a second thought.

[@DakshuTechnoTips]

Thank you so much 🙂

[@DevedraVerma-o2o]

Sir ji namaskar sir aap ne bhut acchi jaankari di mujhe bhut hi accha lga

[@insearchfpeace5391]

बोहोत अच्छा विडीओ! सर कट ना लगे इसलिए जो हैन्ड ग्लोवज् होते है वो कौनसे कंपनी के लेने चाहिए?

[@tejendrapradhan1511]

Thank you for cautioning when handling angle grinder

[@opyadav9046]

बहुत प्यारी जानकारी दी गई इसके लिए आपको बहुत-बहुत धन्यवाद

[@DakshuTechnoTips]

Dhanyawad !!

[@MrPremsharma]

This is the best video available in the internet for FAQ on Angle Grinder. Nice one❤

[@DakshuTechnoTips]

Thanks!

[@tilluballu6009]

मेरे साथ 3-4 बार एंगल ग्राइंडर से एक्सीडेंट हुआ पर छोटी मोटी चोट से टल गया पर एक बार ग्राइंडर उछल कर मेरे कंधे के नीचे लगा तो 17 टांके आये तब से सबक सीखकर बहुत ही सावधानीपूर्वक चलाता हू, पर एक बात कहूंगा, कि काम मे कई बार थोड़ा-बहुत जोखिम तो लेना ही पडता है नही तो काम करना कठिन हो जाता है।आपके विडिओ से सीखने को मिला धन्यवाद।

[@altafvhora]

Thank you for all the safety tips. Extremely necessary and useful for the beginners like me. God bless you. ❤

[@DakshuTechnoTips]

Welcome and thanks !!

[@pummykk]

Thanks for the valuable information especially the safety factors. I am 76 years old but crazy about tools since childhood.

[@DakshuTechnoTips]

Great sir..

[@dargabanki8111]

Bahut badiya jankari diye sir aap to aak mahan guru ho , kash aap jaise hamare gurukul mein aise teacher's hote to main bhi apke tarah jankari mil sakhun

[@DakshuTechnoTips]

🙏🙏

[@dr.ajoyshankarverma1528]

Extremely important information on many points. Did not know that Angle grinder is so prone to accidents and why it is so. Thank you. Also it was revealing to know that grinder should not be used for cutting wood because both processes require opposite rotational direction of blade. This is a very very valuable video. Keep it up.

[@DakshuTechnoTips]

Thanks !!

[@karamchand6659]

ਬਹੁਤ ਵਧਿਆ ਜਾਣਕਾਰੀ ਧੰਨਨਵਾਦ ਜੀ 🙏🙏

[@prakashbhumbar3223]

बहोत ही महत्त्वपूर्ण माहिती दी है सर आपने धन्यवाद.

[@souravdey2344]

Very useful knowledge. I am using angle grinder since last 20 years. But I learned a lot.

[@DakshuTechnoTips]

Thanks for watching

[@pmittal19]

Is video k liye aapka dil se bahut bahut dhanyawad, bhagwan aapko khoob samridhi de..

[@DakshuTechnoTips]

Dhanyawad !! 🙏🙏

[@bamadutta2794]

Best video in tools I have ever seen - thank god, i saw this video before planning to use angle grinder.

[@DakshuTechnoTips]

Thanks

[@PangjenfaiTamang]

जो कुछ भि सिकाया एक दम अच्छ।ज्ञान् दिया अपने सिस्की लिए सुक्रगुजार हु मै दिलसे आपको इज्जात देता हु जो आपने बताया किसिनेआइसा नहि सिकाया

[@PangjenfaiTamang]

अप बहुद अच्छ। इन्सान है वैसे मै नेपाल से हु

[@PangjenfaiTamang]

नमस्कार भै मै नेपाल से हु मैने खराद मसिन हावा ट्याङ्की कटर मसिन ओल्डिङ मसैन सब कुछ नया और हाइबी मे लिया है पर उसे अभि तक अच्छे से चलाया नहि है वैसे पन्चर से भि अच्छा पैसा कमाता है लोगोने मेरि मसिन ओ है वैसी खडा है कभी कभी थोरा बहुद मै खुद चलात हु लिए हुए पुरे 6 साल हुवा है कोइ ।म ये सब चलाने वाले है तो फिप्टी फिप्टि मे काम गर्न था

[@DakshuTechnoTips]

🙏🙏

[@DakshuTechnoTips]

🙏🙏 Mein India se hoo

[@janutashu5300]

ग्राइंडर टूल्स के बारे में बहोत बढ़िया जानकारी आपने दी, डिस्क लगाकर भी दिखाते तो और विडियो अच्छा होता।

[@DakshuTechnoTips]

Thanks for suggestion !!

[@Kewalfauji]

Sir g maine agar apki video pehle dekhi hoti to sayad mere foot mein chot nahi lagti apne bahut asha explain kiya thanks rab tohanu khus rakhe

[@DakshuTechnoTips]

Thanks a lot !!

[@vijaychaudhary6102]

Most of the user do not know the basic and most important precautions of angle grinder uses . Thanks you ,for so valuable informations .

[@DakshuTechnoTips]

Most welcme sir..

[@vijayshah3493]

very very useful information & guidelines for use angle grinder thank you very much, good luck

[@DakshuTechnoTips]

So nice of you

[@हिन्दुराष्ट्र-ङ3ण]

आपका वीडियो बहुत इनफार्मेटिव होता है l धन्यवाद

[@babulalmaurya5678]

जानकारी और सलाह बहुत अच्छी दी है। आप को बहुत बहुत धन्यवाद 🙏🏽

[@DakshuTechnoTips]

Dhanyawad !!

[@manojrajput9294]

इस अति महत्वपूर्ण जानकारी देने के लिए आपका बहुत धन्यवाद।🙏

[@MsArzu333]

Dear, love you from Pakistan, India zindabad for having such persons like you. You helped me know how to use this valuable machine which can turn into dangerous article if not 🚫 handled properly. Thanks 🙏

[@anandjaisemporrajsthanmeiy1079]

Mere pass toggle wala angle grinder hai aap ne sub kuchh bataia per ek baat bhuolgey mere hisab se grinder ki shaft per jo wheel jis per cutter oer grinder hota center mei jo hole kam ayda hai. Us ko kaise sm cbhota bara hole kaise set hota hai bataey.

[@ttvasishna]

First time watching your channel, very very informative video, subscribed. Thank you

[@DakshuTechnoTips]

Awesome, thank you!

[@PradeepKumar-od9nz]

Very useful information aap ne diya. Bahut dhanyawad.

[@DakshuTechnoTips]

Swagat hai aapka !!

[@pape_wala_rusk]

BAHUT HE ACHI JANKARI DI APNE DHANYAWAD ☺☺

[@DakshuTechnoTips]

Welcome

[@amalahmedchoudhury5181]

Thanks for your life saving tips.

[@inderjeetsinghmehra381]

Dear, Excellent Explanation, Precaution is better than Cure. Best wishes to all.

[@DakshuTechnoTips]

Thanks

[@dharamrajdalal5938]

बहुत महत्वपूर्ण जानकारी दिया धन्यवाद जी

[@DakshuTechnoTips]

Aapka swagat hai

[@subhashchandra2178]

बहुत ही सही जानकारी देते हैं आप

[@DakshuTechnoTips]

Thanks

[@marchandaprabhu4101]

Good information, your video saves major injuries And saves the life, thank you brother 👍👌

[@DakshuTechnoTips]

My pleasure

[@Myyutubee]

Thank you so much for sharing most important instructions and for all your efforts Sir

[@DakshuTechnoTips]

Thanks !!

[@msbanwal8767]

भाई जी इस जानकारी के लिए बहुत बहुत धन्यवाद! मैं तो ए सारी गलतियां करता था, प्रभु की कृपा थी कि मैं बचा रहा।

[@DakshuTechnoTips]

🙏🙏

[@shetisamadhan]

बहुत ही महत्त्वपूर्ण व्हिडीओ एक नंबर 100 जबरदस्त

[@DakshuTechnoTips]

Dhanyawad !!

[@wasifqasim5559]

Thank you very much for providing very important n useful information.

[@DakshuTechnoTips]

You are most welcome

[@abdulhamidsheikh7708]

Thanks sir. Aap ne vidio se angal grandar ki bahot hi achchi jankari di, painter Hamid wani dist, yavatmal ,ms,

[@DakshuTechnoTips]

Most welcome !!

[@SurinderSingh-mu2oj]

Good video. Angle grinder generates sudden inertia kick when it starts. If the switch on grinder is left on mostly due to power cut, when you plug it and switch on the wall mains switch, it may jump off from your hand. So always switch it off after power cut and remove from power socket. And always make sure it is off, when plugging into wall socket.

[@vijayandamodaran9622]

Nice vedeo, well explained safest method & safety precautions while using angle grinder appreciate you thank you for sharing

[@DakshuTechnoTips]

You are welcome

[@syedsuhelrahman9639]

Kindly provide the link from where I can get gloves which you showed in your video.thank you

[@DakshuTechnoTips]

Please checkout below link for gloves *amzn.to/3L9noHY*

[@surendradhakar7300]

Bahut achhi jankari di apne dhanyabad

[@manojsahoo4661]

Very useful video mostly for new user.Thank you . Please make a video about how do maintainance of home using grinding machine .

[@DakshuTechnoTips]

Sure 👍

[@ravindernegi2053]

Very well explain! Keep it up.. Unfortunately hamare desh me aise practical training hoti hi nahi kiu bhi hardware ki shop se power tool khareed sakta hai aur chala sakta hai ye soch kar har banda expert banane ki koshish karata hai.. Kam senjam har power tool ya kisi bhi anya machine ya tool etc ke saath savdhaniya jarror ho jaise operation and maintenance manual hitebhai aur har sale karne wale ko ye precautions buyers ko explain karna chahiye chahe 2 minutes ja samay lage... It's should be like a chemists selling medical tablets, capsule etc... Unke baat doctors hone ke baavjood log sunate hai aise hi nishkaam sewa sab hardware ya aise machine/ tools bechane wale ko bhi dene ka pravdhan hona chahiye...

[@AbdulLatheef-k6g]

Very good safety guidelines.. Thank you

[@DakshuTechnoTips]

Always welcome

[@bharatbhatt3645]

Sir sab blade me safeguard lagaye ya sirf cutting blade me pl. Explain❤❤

[@DakshuTechnoTips]

As per my suggestion use guard only in cutting machine.

[@sashidharprabhu5067]

Angle grinder a versatile power tool but.much mis used. Thank you for the valuable safety tips

[@DakshuTechnoTips]

Welcome and thanks !!

[@rajsharma2468]

🙏🙏🙏 Very good information Can we use angle grinder to cut wood?

[@Ankit_M]

*One Of The Best Informational Video On KZbin* 👌 *Thank You.* 💐

[@DakshuTechnoTips]

So happy 🙂🙂🙂🙂🙂 Thank you !!

[@himu160]

Thank you for providing valuable safety information.

[@DakshuTechnoTips]

Welcome !!

[@ShashiKant-ei2in]

बहुत अच्छा जानकारी दिया थैंक्स

[@DakshuTechnoTips]

🙏🙏

[@smbanandanand4566]

Very informative and useful tips. Very well explained. Thanks.

[@DakshuTechnoTips]

Glad it was helpful! Thanks

[@shankarjadhav1735]

Thanks for very important information for use of angle grinder & its prpoer use thanks again

[@DakshuTechnoTips]

Thanks and welcome

[@abc123hzsj.12]

very nice informative and helpful video. thank you.

[@noorahmedarkati1814]

Bhai sab aapne bahot hi acchi maloomat Aap ka shukriya

[@DakshuTechnoTips]

🙏🙏🙏🙏

[@sudarshansudarshansidar7819]

बहुत बढ़िया जानकारी🙏👍 सर जी क्या हम एंगल ग्राईंडर में चैन सा एडाप्टर लगा सकते हैं, यदि लगता है तो कितने लंबाई की बार लगता है और ऐसा करना क्या सही है..... मार्गदर्शन करें सर... 🙏🙏 या फिर इस विषय पर भी एक विडियो बनाएं... आप के जवाब का इंतजार रहेगा... धन्यवाद🙏💕 सर

[@DakshuTechnoTips]

Thanks Sir, Angle grinder ko chain saw ki tarah use kar sakte hai par kabhi kabar ke liye sahi hai. Isme aap 16 inch ki chain laga sakte hai. Is par video jaldi hi aane wala hai. Dhanyawad !!

[@sampark1]

Bahut hi informative video hai aap ka. Thanks and keep it up.

[@DakshuTechnoTips]

Welcome !!

[@tinkukumar1869]

It's very useful & helpful video sir Thanks sir🙏

[@DakshuTechnoTips]

Most welcome

[@supermax2713]

very very helpful video, many many thanks

[@DakshuTechnoTips]

You are welcome

[@harshadthakor5725]

Bahut achhi jankari di apne 🎉🎉🎉

[@DakshuTechnoTips]

Thanks

[@orange_robot]

Very informative. Thank you for great video.

[@DakshuTechnoTips]

Welcome

[@l.n.chouhan]

जानकारी बहुत अच्छी लगी आप एसेसरी के name भी बताया करे

[@DakshuTechnoTips]

Thanks !! Haan ji Bilkul 🙏🙏

[@RoshniyadavYadav-h1c]

बहुत सुंदर जानकारी 🙏🙏

[@DakshuTechnoTips]

🙏🙏

[@udaythakor4915]

Bahut Aachi Jankari Meli👍🙏🌹

[@DakshuTechnoTips]

Dhanyawad !!

[@omkarshirke4876]

Sir marbe cutter se Wall cutting kr sakte hai for electrican ???

[@DakshuTechnoTips]

Haan sir.. bilkul kar sakte hai. par wall cutting ke liye aap "Wall Chaser" machine lijiye. Link niche de raha hoo check kar lijiye. Ye machine aapka kaam bahut jaldi kar degi. amzn.to/3T0VIY2

[@s_intruder150]

🌿🌹🌿Aapke video YOU Tub k sabse best video me se 1 hai🌿🌹🌿 ap bahut aage jaoge q ki apme vo gun hai🌿🌹🌿

[@DakshuTechnoTips]

Aapke is comment ke liye aapko bahut bahut dil se Dhanyawad 🙏🙏🙏🙏

[@vinaywankhade9121]

Very nice safety explanation

[@sagaronline265]

Diamond video.iska koi mol nahi.dhanywad bahutonka haath ,paav,aankhein ,jaan bachane ke liye.God bless u. i got one question .main beginer hoon aur muje ghar ke liye lakdi kaatne ke liye,lywood kaatne ke liye angle grinder lena chahiye ya wood cutter lena chahiye. kaunsa sahi rahega in terms of job and safety.muje purani lakdi almari ko kaatkar naya design se banana hai for which i need to cut wood and plywood.

[@DakshuTechnoTips]

Wood cutter machine. please check link *amzn.to/3zyspYV*

[@kuldeeptripathi6132]

Comprehensively explained each detail n safety precaution sir. Thanks. Can you please make such a brilliant video on Rotary Rescue Saw Makita gasoline powered?

[@NK-bh4fs]

Thanks sir u r best advisor sir i like your videos .me aapki video dekha karta hu .jo ham dhoond nhi pate vo video banate ho aap

[@DakshuTechnoTips]

Thanks a lot for your motivational comment !! 🙏🙏

[@yunusjames4839]

Very good speech brother for Life safety it's true absolutely so many happens coming So safety is first God bless you brother

[@DakshuTechnoTips]

Thanks !!

[@ashishshrivastava9729]

very informative safety tips..... everyone must follow this

[@DakshuTechnoTips]

You are right !! thanks

[@kaailu1001]

@DakshuTechnoTips does the guard fit with concrete blade, because the sizes are usually 110 mm and rated size of angle grinder is only 100 mm?? doesn't the blade touch the guard? thanks

[@nileshmarathe282]

Very very important & usful got imformation got from this video. Thanku very much sir.

[@jayeshdedhiya493]

आपका बहोत धन्यवाद आपने दील से यह वीडियो बनाया हे ओर हादसे के कारण भी

[@DakshuTechnoTips]

Thanks !!