Dales Collection of Composite Doors Installation Guide | Eurocell PVCU

The Dales Collection of Composite Doors: a beautiful, secure and weatherproof option for your new door.
For more information and prices visit www.eurocell.co.uk

[@redstar956]

I'm impressed you managed to get Ringo Star to do the voice over 👍

[@ppcsl]

What a good instructional video for us DIYers. Well done.

[@EurocellPVCU]

Thank you, we're glad you enjoyed it! Come back soon for more :)

[@colinmarchant4283]

ppcsl

[@kellysmith6686]

These people do a terrific job

[@Luckybo100]

Nice job lads 👍

[@BRUMAICANGYAL87]

Such a stunning door we're having our door fitted on Thursday 16th December 2021 so excited bye bye 30 years of eroded wooden doors

[@japan5865]

Very good job

[@bobmarley965]

Beloved i am trying to lfind a video that teaches, 'how to make a door frame' but this is a good video.

[@peterbrown5201]

Doors should be on a sand and cement bed. Gives a solid durable base. Clear silicone is good for fishtanks. Clear silicone turns grey. 'White is Right'

[@faysaldz4098]

good jobe

[@hannaheckman5201]

It definitely looks like the Tomlinson Deakin family home. It have to be their house it have to be and I can tell.

[@robimof39]

You might need knock ins so that the hinge and door sash doesn't catch the inside walls which are narrower than outside!!!

[@eileenmcnally4595]

Hi my space where door has to go in is 2 inches to small or door 2 inches bigger any suggestions how to sort this please.

[@criartoros]

You could make the width opening wider 10mm wider than the door frame. Draw a vertical line with a spirit level from top to bottom of the height. Then cut with a wizzer

[@jimfromyork1]

Nice door, better practice on your sealing though, very ropey

[@Clubbinheaven247]

Instant sacking for sealing like a 5 year old 😂

[@kirkjohnson3182]

Where can I order pvc material

[@mytime103]

im not so sure about the lock. could the lock not be snapped after taking the handle off. just under lock there is a screw or rivet which could be drilled out if need be. and whats with the big hole under the barrel of lock. i guess you could hit the top of lock and it would just break into the space below. looks so weak around the lock

[@dilrajsohal5575]

mytime103 ree

[@klinctaf]

Writes out resignation note and rushes home to get that sheet back on the bed!

[@cactoosdh0]

Why brits won't use proper foam first ?

[@theunambiguous]

Why would seal the door before taking the protective tape off and cleaning any dust off, lad also needs to get them sealing skills fixed

[@marvinvito2059]

So silicone doesn’t get on the face of the frame 😂

[@hsan8254]

جميل

[@Da51lva]

Everybody comment the bad silicone job but it's like Oak, after a few years will be perfect!

[@tommorris7061]

That sealing is fuckin horrendous

[@gissie391]

My door is attatched to a partition wall😞

[@cardjunkie]

there is a channel on youtube on how to seal

[@ninjars1]

yer man cutting about with a don carlos moon blade 👍and a skeleton silicon gun🙈....you wouldnt get in ma van wae a gun like that son

[@bobmarley965]

lol

[@frazzle657]

I'm not gonna sit here and act like I'm good with silicone. But that there, that would have made MJ Fox look like the Picasso of sealant

[@louishollandjr]

Eroupe gets best home improvement products.

[@harrywright3102]

Talk about bumpy silicone looks like a crocodiles back.

[@hellfire8492]

Now try fitting one from door stop! Lol!

[@cardjunkie]

true not much adjustment on them !

[@stevent96]

a don Carlos knife , possibly one of the most dangerous of tools 2 be using 2 remove old silicone? good job tho apart from the sealing of the door outside that was shocking decent silicone gun needed and throw the masking tape . and I know I know that ever bugger is a critic and always quick to find fault . I guess its easier to find fault than praise, good installation overall

[@sarkargaming2314]

Hindi me dikhao

[@davehole643]

as a site carpenter i'd get paid £30 for fitting that door set...on my own too...the silicone job isn't that bad to be fair to them, i've seen much worse done by time served silicone pros.

[@melsagelord3991]

Yeah, solid enough fitters these lads. Let’s see some of these wise asses making comments showcase their skills up here on the tube. Waiting...

[@Male666chauvinist]

Those screws he drove the door jamb if the police come knocking with their door opener it wouldn’t take much for that door to come flying off

[@Lee-wx9zp]

Reason y siliconing so bad is these chaps have 3 days in a warehouse to learn how to fit doors n then chuck straight on to site work any problema occur they got a professional team who come out n do all adjustimg ans stuff putting things right Y not just make the blokes learn how fit properly n longer then three days

[@lonewolf-rf5xx]

knock ons or addons are not used as the door has been measured wrong are you been serious ??? its for the internal reveals or in some cases skirting boards that can manipulate the door opening . dont ruin a good video with stupid comments

[@jamesdeans3895]

A addon should allways be used on the hinge side also in some cases on the head as the floor hight can be high

[@paulduffy8354]

Rough! Clean the frame before you seal with silicone

[@Male666chauvinist]

I love to see the police use their door opener wouldn’t last long

[@MrJatzeq]

Poor skill- silicone job could be done better insulation which is critical in a winter - foam first , silicone later- sometimes is better to made bigger gap beetwen wall and frame and apply foam for full frame thikness and In UK only couple companies who made full internal metal door frame - it prevent twisting doors and keep doors square ( not falling down one side ) -why? lets say : sharp sun or -20 out - 20 + insde.In case fully glassed doors proper packing prevent falling down one side

[@MrJatzeq]

you are wrong ...silicon in winter is poor barrier to freeze and cold wind and foam improve soundproof as well ....

[@MrJatzeq]

again you are wrong spacer are for adjustment and level a door frame....not every door frame are plumb and not every door frame hole are plumb and level.....

[@MrJatzeq]

this days external doors have many locking system points so proper installation are key for proper working locks for years.....what if door hole is not level and plumb? and your door frame are same size as hole?

[@maxwellmc9734]

Your doors Will fail at the same time the mastic does .. drafty house

[@dasmit-wp6bw]

wow bad silicone job, what a mess.......

[@kmclfc]

why the pvc knock onns cant off beat a good fit.

[@thra5herxb12s]

Cutting the part across the back of the van and using superglue is the mark of a bodger..

[@ducaschoenberg7156]

You can learn more about it on Woodprix website I think.

[@theguym]

I'm shocked to see that Brits barely use any foam!

[@dennell]

please dont use white silicone on the outside brickwork... it makes it look a right mess. Use clear.

[@darrenkearns3134]

I use white outer on brick. But i do a nice job

[@CurvedSlightly]

Cowbois.

[@marshy511]

My lad can silicon better than that!

[@MM2009]

Heh, this window technology is not even close to 1990s in europe. I remember isoplast 4000 started in the 1990. 4 chambers frame and metal frame all around compare to uk products available in 2021 isoplast from 90s was better heh. From the window installation technique drilling frame is absolutely incorrect, can and will bow the frame. You didnt used low expansion foam to fix the frame all around. This silicone bullsht you did will delaminate and cause blowbacks through the cracks. Awful job typical uk quality. I assume you have no clue what is warm install technique LOL, using butyl tapes inside with self adhesive perimeter trim and breathable tapes outside.... not mentioning fixing anchors..

[@floodbond]

Next time send out a fitter who can measure the door,rather than use knock on.and beading in the head of the door, jack the door up or use better packing. Not the way to do it sorry

[@MrRupert61]

+Andrew waterhouse you are right i noticed he cleaned the door after he siliconed he should have cleaned all surfaces first. some times you have to use a knock on if the inside reviels are smaller than the outside.

[@justycrusty]

Add on is to ensure hinges clear inner reveal and skirting. Sorry

[@theunambiguous]

The amount of times I've been to fit a door which someone else has surveyed and measured the opening indicating the hinges would be buried into the plasterwork is untrue, add ons are used for many different reasons and isn't a sign of mis-measuring