DTF Transparency Films Not Feeding Through Printer| Sharpie Method Easy Fix

[@823Creations]

I seriously could hug you right now! You saved my day I spent all day, wondering why I couldn’t get my paper to feed! God bless you❤️❤️❤️❤️❤️❤️❤️

[@GerardMorrison-m9n]

I absolutely love your videos sister. Please keep putting them out because I bought over $5000 in equipment and supplies and I don't know anything. Thank you

[@skade245]

that sounds like a bad decision

[@ladyprintboss]

let me know how you fix the feed error and if this method works for you!

[@janiceswingle5574]

This worked for me and my Epson 2760 printer. Thank you!

[@heathermolsbee5751]

When you used the dtf and the powder did you just cut off the black square from the film? Thank you!

[@melissamcm24]

I have the 2760, I had to remove the roller bar but now the end of the prints keep smearing. Which part worked for you? The black box or cardboard?

[@jayo7573]

I'm a beginner in this sublimation dtf and print shirt thing I did my daughter's shirts with sublimation paper and they came out good but when I try dtf film in my epson3760 it did the same thing as this video just didn't read. I'm going to try this method thank u

[@Misfitzdesigns]

I have to try this! I'm about to go insane with my film pulling all kinds of ways!

[@Toonscustoms]

i cried so much!! (so what u could laugh) and u saved me thank u!!!!!

[@nahdiasboutique2435]

I swear I'm so grateful for you video thank you so much sis ❤

[@Misfitzdesigns]

Can You help me???? I have tried this sharpie hack and it somehow won't work for me, I've tried everything. And when the film would go through, it would print good on some then start bleeding ink in middle. I've tried the tape around edges help!!! 😭

[@brendawinningham1425]

I am having an issue with my epson printer only printing at the top. Please help

[@fionahawke6134]

I can't see where in the back I am supposed to put that little square on my DTF film. I have an Epson Eco Tank 15000 and want to use DTF but the various 'fixes' are not working.

[@wankrecordsltd]

get a piece of a3 paper from an art pad and apply some pritt stick across the top and bottom, then apply the dtf to it. it should feed straight through then. when printed the dtf should peel straight off. cut off any excess pritt stick from the dtf sheet and let the pritt stick dry on the paper. you can then reuse the paper over and over. no messing about with sticky tape etc

[@chavetteedmond1601]

I have the same printer and same problem 15000 epson I’m wondering if I need to change the print settings. My film runs straight through

[@brialo6016]

What if you have a sublimation printer f170 and you use the dtf transfer film and it don’t go through do you use the same method with the black marker Thanks New To Your Channel Enjoy the videos

[@ladyprintboss]

You can try that or you can put a piece of masking tape across the entire bottom of the sheet and the printer will think it's a regular piece of paper

[@dreampicmelbourne]

thank you very much for sharing this. that really saved me. many many thanks

[@علي-ه9ق2ط]

I own an Epson L1800 dtf printer and I face the same problem I put a sticker under the film so far the problem has not been solved with me can you help me! Thank you

[@valeriestokes8640]

Thank you!

[@ladygordon91]

Hi mine is feeding but then it loops in the printer and gets stuck.

[@bobbyspivey2885]

I am having this issue, applied your fix and it still is feeding through. L1800 using A3 film

[@stephaniehall3512]

Me too 😢

[@علي-ه9ق2ط]

Have you solved this problem! I have such a printer and I have this problem can you give me advice! Thank you

[@swervgotti]

Super Kind of you for spreading knowledge! God Bless you!

[@hervinthomas4775]

i see you dont have an output tray...how does that work?

[@ladyprintboss]

not sure what you are asking

[@lilgeorge34]

You never showed us the finished item.

[@Kingtone1209]

Put duct tape over the white part in front of the rollers

[@ladyprintboss]

Thank you