Damn Vape Doom Mesh RTA Review + Wicking Tutorial

[@krisgilmartin9421]

Carl, you're wicking technique is spot on. Tried multiple times and failed until I tried sticking the cotton in first. Top man. Works a treat. Thanks

[@MrFreestyler71]

Ahh man glad i helped you out, these types of comments is why i do these videos, brilliant thanks Kris

[@krisgilmartin9421]

@@MrFreestyler71 24 hours and still no dry burns. Cheers Carl. Subbed

[@krisgilmartin9421]

@@MrFreestyler71 hey Carl, just wondering if you ever experienced vacuum issues with this tank? Last couple of builds I've taken it all apart and cleaned, but there seems to be an issue of liquid flow. Once I loosen top a flurry of air bubbles rise up. But hardly any when it's tightened. Any advice would be great. Cheers

[@MrFreestyler71]

@@krisgilmartin9421 can happen, but to eliminate it, comb out the wick a bit more and it will be fine

[@Rhonda858]

I can't stress enough "Don't put to much cotton in the wicking hole's, like they show on the instruction manual...if you do you will get a really DRY BURN!" Listen to what Carl says just a few little straggles barely dipping in the wicking holes but do not block the juice flow underneath, I finally learned to do it in front of my desk lamp and make sure you can fully see the light on the other side, if you don't take your tweezers and push some of the cotton back up to top. I have to agree once you get the wicking down straight....THIS IS THE BEST RTA, SO FAR! Carl I love the way you described the wicking process! I just subscribed to your channel! I will be watching a lot more of your videos here in Houston Texas. Take Care!

[@zoltanballa2723]

Thanks Carl,amazing video u did,now I can enjoy my new Doom RTA.No more dry hit,you are the best :) Thx

[@MrFreestyler71]

Thanks ever so much for the kind comments it means a lot for a small reviewer as myself

[@SuperMOGSTER]

Great video,I,ve only just bought one myself so this video will be very helpful when I do my first set up,thanks

[@MrFreestyler71]

Thanks for the comment, and thanks for watching

[@daviddilewski9514]

Thx mate. Works well. Made my day after 2 fails.

[@AdamKummrow5436]

Hi Carl, what's the best replacement mesh do you get? Does it have to be The size 16×6.8mm or can you get different sizes to fit? Like the wotofo mesh that's 17x 8.5mm? Just new to all this mesh builds, been using standard coils in rdas for some time now but want to get into the rdta mesh coils builds!

[@MrFreestyler71]

I just use the nexmesh strips that are pre cut to the size you need, they come in a little plastic container with 10 strips

[@AdamKummrow5436]

@@MrFreestyler71 Thanks Carl I will check the nexmesh out, and you've got yourself a sub 👍

[@adriansmith8362]

Thanks for another great review as always and honest review. Ive had mine for 3 weeks and it's been a really great vape. And ive got the kylin mesh rta and it's a great rta and ive got the profile rta and the doom takes some beating.

[@MrFreestyler71]

Thanks For the very kind comments Adrian, im glad you are getting the same experience as me

[@allenzheng6583]

thanks for your review on Doom Mesh RTA

[@MrFreestyler71]

No problem, hope you liked it

[@fordy1980uk]

I'm also vaping my kylin m at 3.6v about 80 watts I have purchased 3 more kylin m my custard cream e-juice tastes better than ever. Now my doom RTA is in the box it came with

[@jeff5037]

Will Ford want to sell the doom?

[@fordy1980uk]

Great review m8 all the way from Liverpool anybody who hasn't already got a mesh RTA get the kylin m do not get the Doom RTA I have been wicking tanks for 5 years now the Doom RTA is too much messing around and those dry hit really sting I got the kylin m for £25 from a local brick and mortar shop it's easy to build the flavour is better around about the same price

[@MrFreestyler71]

Thanks mate for the comments, after using the Kylin M imo it has better build quality but the vape is near as dam it to the doom, cheers buddy

[@MrAckers75]

People are not wicking the doom correctly. No need to but cotton down the hole just trim cotton right to the edge of the coil and fluff it out. All your doing is blocking the juice flow by putting coil down the hole

[@MrFreestyler71]

@@MrAckers75 thanks for the comments mate, yes as an update to my video that is what I do now, it's more saturated for me

[@ChriswithaCrc]

Looks a lovely mesh rta to be fair , now I'm interested . And consider the price point it's definitely worth looking at .

[@sean2val]

nice sharp scissors that is what I need this RTA looks sick , thanks for posting you have a new subscriber

[@MrFreestyler71]

Thanks Sean it's much appreciated

[@ChriswithaCrc]

Great review pal

[@MrFreestyler71]

Thanks Chris much appreciated

[@michazonowski6122]

nice review, does it beat profile and kylin m rtas?

[@MrFreestyler71]

oh imo most definitely

[@scottcass5174]

Mine leaks from the air holes ? Any ideas ?

[@MrFreestyler71]

You need more cotton and make sure your cotton is very tight in the mesh

[@scottcass5174]

Carl Richardson thanks mate, gonna try now! :)

[@dimmuborgir82]

how long should you get use out of one of the mesh strips before you need to change to a new one?

[@MrFreestyler71]

Hi stewart, you can get I would say 2-3 months or longer, reason being is that mesh does not gunk up like normal coils do and a dry burn of mesh at very low wattage cleans the strip to like new and only slightly darkens over time.

[@CaptDoobs]

Great review, just subscribed, cheers

[@MrFreestyler71]

Ahh thanks ever so much Michael, im glad you like the video, im not as professional as some on here but i have been in the industry for 10 years and i have had this channel for 6 years but had to out it on hold for 18 months due to personal issues, i am trying to rejuvenate it somewhat, so thanks for the sub mate

[@jeff5037]

Great review! New subscriber!

[@MrFreestyler71]

Thanks Jeffrey

[@wattn-dampf5228]

Very nice! I order! ;-)