Dan Corrigan's Setup Review

We go over the finer details of Dan's setup.
Victor's Channel: / @garciasfinest
Looking for a way to support the channel? Consider making your skate purchases from Tactics through this link:
alnk.to/fSgfBYI
DISCLAIMER: As a Tactics Partner I will make a commission from sales through this link. Thanks for your support!!!!

[@ryanhingorani4019]

I turned 30 last summer. Discovered both of these guys' channels right at the beginning of the lockdown in 2020 when i moved back in with family and got back into skating. So thankful i did after not being on a board for 7+ years, it keeps me sane, happy, and healthy!

[@TheDailyGnarticle]

I had the same thing happen, and I’m better now than when I was a teenager. So happy I picked it back up

[@yelramyelram]

same. so glad I did, I could listen to these guys to no end. great guys, good content

[@itsadoozyskateboarding5323]

I’ve never flat-spotted a formula 4. I’m 200 pounds and have been riding them for 3-4 years now!

[@nero16ify]

as an over 30 skateboarder this stuff is the kind of content I dig. Your the man Ben 🙌

[@jordanbrorby8494]

Funny, as a 34 year old skateboarder this is the kind of content where I wonder why anybody would ever give a crap about this trivial stuff

[@Rbsp28back]

❤🇫🇷

[@jensenacklese3049]

38 here, I think I found new friends 😂

[@ZackDowdy]

Enjoy videos with you and Dan

[@trevorschauwecker]

This is really high level advice that may not regularly accesible to people living in smaller populations with less skaters. Great video and review!

[@craigoswald9083]

I love the information. I followed Dan is well and at 55 there's always some good info. Ride until you drop 🤘

[@stephenbasu1548]

That was a great,authentic ,real conversation About skating. 👍🏽👍🏽👍🏽

[@BobSk8s]

Dan's set up looks like if you flipped it over and shook it a bunch of hair and crumbs would fall out

[@exomoneylabel]

and pennies too

[@tima8049]

It probably smells peculiar too.

[@BobSk8s]

@@tima8049 smells damp

[@HankHillOfficial]

Lmao

[@johnmeehan7884]

Ew

[@Johnbetty46]

Toe side front wheel is always first to cone and I’d say 99% with confidence it’s from turning as my level of skill is not on par with either of your good selves so the turning must be causing this. Another great detailed video too 👌 love these 👊

[@jimgrude]

Dan's right on.F4's definitely flatspot and wear down quicker. STF don't, but also don't feel as good.

[@LoomisPeabody3]

Yuup, front toe side for me too. Also, I'm 45 now and skate almost every day. You two dudes are two of my favorite skaters and content creators. Please never stop!

[@tcsk20]

Nearly on 100k well deserved Ben

[@TangoDown357]

Ben, Dan, and Vic... That'd be a dream sesh for me to be on lol. Raddest dudes 👊

[@timriecken5453]

As a nearly 20 year golf pro and 14 of those have been a master fitter.... I loved this vid. ❤️ Dan is awesome and always enjoy his vids. Thanks for this ☺️

[@Stug138]

Very informative, Thanks Ben & Dan.

[@phatallbutt7879]

Wow, look at that! You gained a subscriber from Dan’s channel.

[@FrogeFella]

I have been heavily digging all of the content you made while in Cali. Great stuff!

[@50yearoldskater]

Hey Ben. Started in the 70's but been on board non stop since 1983, so 40 years straight of skating. Front toe side for me as well on the wheel cone. I rotate them by eyeing the wear, so either diagonal or just straight switching the front and back depending and start at a 54mm. Currently riding Dragons 54MM X 32MM

[@Unlockingparadoxes]

Great video and energy and vibes and articulation.

[@edo-j1784]

Great video guys! I follow both of you and I always learn something each video I watch! I have been a Powell Peralta guy for apprx. 30 years.

[@Unlockingparadoxes]

Much love and respect to you and your channel Ben.

[@Morbidia]

The Magicians setup is amazing looks great. Dan has such amazing board control.

[@facksmasheen]

19:45 I've used the small end of a skate tool for this. The outside edge of the part of a t-tool that you use for tightening hardware is really close to the inside diameter of the outer ring of a bearing.

[@stevenmadethis2383]

To be fair, I'm 31 and subbed to both of you, soooo yeah

[@FloatDown]

I skate Acid Chem Co REM formula too and I really like them. One thing that was different about them is that the bearings are a VERY tight fit, they're definitely not going to get tweaked by lateral pressure/impact

[@dieseldabz7104]

Have been a fan of both Powell Peralta and Independent Trucks for decades now. Only trucks will ever buy and other than maybe 1-2 other companies only decks I buy or skate, one other company being the OG of the industry Santa Cruz (VX decks or Everslick ©) I still mess with truck height and I'm 43 but do prefer the mids as well in Hollow's or Titanium.

[@JohnWBlair82]

Dan's sweater is on point.

[@bFOURdwZEROlf]

Hell yeah Victor's here, too!

[@ejlopez6637]

Tic tacs are what wear out the toe side front wheel. Even if you ride loose trucks, you’re bound to do little tic tacs when doing little turns. It’s usually the back ones. Because your front foot naturally dips towards the toe when you turn, you usually drag your front wheels even if it’s just for a fraction of a second before you put your wheels back down.

[@octaviobarrera6418]

The collab i been waiting for aha

[@fatdadskatesbad]

Dan is probably one of my favorite skaters to watch skate. He has such a wild original slappy style and absolutely shreds.

[@commandZee]

Dan with Ben, a pleasant surprise!

[@jessidupuis7500]

ive got some nice santa cruze deck rails that are very rounded and the ends curve away from your wheels for more clearance. love flight decks i have both of andys, nice setup dan! love watching u guys sk8

[@NotMe42554]

Angle gauge is also great for measuring angle of pop :) since that ones magnetic it sticks to the bolts and then you can tip the board

[@Unlockingparadoxes]

You guys are both legendary 💯🙏🛹

[@AESTHE1TE]

Been waiting for this video for long enough thank you!

[@MrArkBrian]

Tom Penny in his prime rode 7.5” decks with 8” axle Indy’s, so by those standards 8.5” deck on 9” trucks should even be fine.

[@Bikecampcook]

Loved this great to see any skaters thinking on setup Regards from the UK

[@burger1113]

Soooooo rad to see lol it's like you have your favorite dc hero randomly show up on the comic book of your favorite marvel hero. Given that you are a huge fan of both, of course.

[@robertojuarez9785]

I love this park, I skated this stage with the big green trash can when I was a teenager, I love the feeling of being there, legendary stage in long Beach. Now I'm almost 40 and I just want to go back to get the feeling of being there, even if I just do a olie down the stage

[@azazelreficulmefistofelicu7158]

159 on a 8.5 board with "inverted" kingpins, my madness approves.

[@booth403]

Talking about getting the bearings out of a tight wheel, I've always just used the truck, screws the threads up after a few times doing it but at that point you're getting ready to swap out your trucks anyways

[@maciejgielnik49]

Dan don't be so stressed out. You are a cool guy with cool setup!

[@daanzen]

I must say, your laugh at 7:18 was beautiful!

[@jimmyt_1988]

Ah, when he said "the above 30s" I felt personally attacked ... Dammit. lol.

[@q7Hx]

Ben with the Slappy connoisseur himself.

[@MarkPuke13]

I love you guys both!! Fucking siiiick❤

[@matthewzito5952]

Ya for sure .. you two rock

[@williamtomisser8921]

I have never seen the pivot fakie late regular before. Super sick!

[@transferz]

These Cali videos are most enjoyable. Hope you go back soon and share the experience w/us like you did for this trip. Damn Gifted Hater Loves you. Maybe he could visit you and do some more collab videos,or do this style of video w/ppl. up in your hometown? Thanks Ben you e brought us lots of enjoyment in this series.

[@endthedrugwartoday]

Dan understands skateboarding like few others. Love his videos.

[@Yoa-cc7bo]

really good duo right here, woulda loved to see a game of skate with u two

[@markdearlove8634]

Enjoyed every second

[@rulehardgarage9740]

I like Powell shapes so I picked up a 243 flight deck and the shape is glorious and I love everything about the decks but man the fiberglass shards from skating crusty Midwest spots is brutal. I just can't do it. I'm actually having a lot of fun skating weird shaped decks like the Welcome Darklord right now. My back toe side wears out but I do a ton of shuvits varial flips, BS 180, shuvit revert etc.. so for me it adds up why.

[@pneuma6421]

Dude i thought i was the only one! That fiberglass shit that stabs ur thumbs is so goddam annoying!

[@bakedbeings]

Dan spending the whole paycheck on a fresh fit for Papa Ben's channel 👌 Those 2.5 subs just clocked over to 3.

[@Mclovinthedank]

F4 flat spotted for me within the first week. I like to skate fast so I just slid extra to even them out. and then they ended up being my favorite wheel because of the shape and I felt they slid better than STFs.

[@nathanvaltierra8707]

What shape?? I've never flatspoted any f4 spitfires and I've have like 5 sets

[@thickenstein]

Front toe side wheel cones most for me too. I know I'm a heavy toe side turner and I take more right turns. It's hard to take sharp left turns without slamming. Also, I've never flat spotted a Spitfire, but they definitely wear down fast-ish.

[@cannibalisticzombie6663]

Hey Ben front toeside is due to the most force being brought on the wheel while pushing. Great vid, keep them coming, greetz from Germany :)

[@Exploitedyouth2004]

Never flat spotted F4s but I have flat spotted Acid REMS before funny enough. Front toe side wheel cones out for me first as well.

[@brandonplante5570]

My most worn wheel is always front toe side and I do believe it’s from fakie kick turns or slappy crooked grids on curbs. If the curb is low enough, that wheel ever so sightly drags on the ground.

[@SpiritsandNature]

front toeside wheel goes early due to turning pressure from your front foot

[@diplenski]

i'm regular footed and also cone out front toe-side wheel first/most

[@idmhead0160]

Me too

[@jumboshirmp]

Ben, same: my front toe-side wheel cones first and I have no idea why. I ride almost exclusively transition

[@robertblackmore703]

Same- front toe. It’s just from riding flat ground. I think my normal weight distribution is a bit more toe side than heel, and my front truck is my turning truck so it’s a bit looser and takes more weight. Also, if I’m turning around it’s easier to turn backside than front, so I do it more often.

[@johnm3946]

Now I want to get a tape measure and nerd out on my board.

[@kokote1847]

I always cone my front toe wheel more and I'm pretty sure it's because I slide my wheels when I quick turn from fakie to forward, on flat and transition

[@kryptichands968]

I skate spitfire f4's , conical full, theyre the best wheel Ive ever rode, and I finally switched to them from the classics, they havent flatspoted at all its been 2 years since, also they have a distinctive bark when you nose, tail, blunt ect.

[@eaf27]

Sweet 2 of my favorite people. Weirdly enough I found Ben through his carpentry channel. Good stuff here and there.

[@aidinlayne]

which channel is that?

[@eaf27]

@@aidinlayne www.youtube.com/@vancouvercarpenter it's just called Vancouver carpenter if the link doesn't work. Seems to be more drywall videos but I really enjoy his work and tips.

[@diddymelone2265]

F4s never flatspotted for me and I do Powerslide all the time. Didnt try stf. Other wheels definetely flatspot for me. Impressed that the dragons did not flatspot either. Probably because they Slide so nicely on rough ground.

[@PHeMoX]

The big nose is why I like the Andy Anderson flight deck (the first one) quite a lot. The downside is how it is a fairly big board of course, but the nose is less of a problem and way more of an advantage to me.

[@smeegain3657]

Cool - really I like the setup talk.

[@milesallen7339]

Thanks vic

[@swires1]

Can you bring Dan Corrigan and Gifted Hater in the next one

[@bananaclipper7692]

boxing match

[@dadboard]

@@bananaclipper7692 that would be the most 7th grade haymaker contest to ever go down 😂

[@sebastienv7346]

Now bring dan to Vancouver!

[@akiko3688]

that would be cool

[@galvanizedgnome]

Ben is a cool dude

[@crazyjakie9972]

crossover of the century

[@knightofbrokenglass9237]

superhero crossover episodes are the best

[@miclgael]

Damn Ben, with all the stats!

[@robertcasey3528]

Dan's hardware is stolen from Dale's kitchen cabinets.

[@andrewstachowski3375]

dan is such a little weird guy

[@phoenixtheshark]

Yeah, but he's *our* little weird guy. ❤

[@andrewstachowski3375]

@@phoenixtheshark your*

[@SPINNINGMYWHEELS777]

you can always tell it's Dan by his bushings going crazy micro squeeks LOL

[@peepoclap9479]

Ima simple man, I see a Ben upload, I click, like and comment.

[@MrBrain05]

It’s always front toe side wheel for me and it’s from nose slides for me 🤙🏻

[@Mystninja]

Do you stay with Dan in he's van.

[@Brusselsproutsk8]

I'm 47 and I watch both your channels 🤙your setups are a bit small for me though🤣

[@mouthgina3213]

Day 1 riding Spitfire F4 all 4 of them flat spotted on me (regular street ground not skatepark smooth ground) OJ and Bones STF are the only wheels I trust for power slides on surfaces outside of smooth park ground.

[@bananaclipper7692]

insane

[@3jsu5]

defective

[@acgwestsidesb6410]

At least try them on skatepark first. Classic shape F4 101A /99a especially 99a super easy to flatspot. Especially brand new. And conical full or OG shape way more flatspot resistant in 101a. Anyway stf 103a wearing down super slow in wide shapes vs F4

[@kanklelove1826]

Hi Ben Please tell Dan, kankle love says, "Ride the Enjoi High Water decks" because he's always wearing high waters!

[@brycekeith5653]

My front toe side wheel also is always the first to cone. I assume just from a ridiculous amount of fakie pivots. Every time I don’t land a trick I usually step back on, roll away switch and then do a fakie pivot to regular before trying again.

[@ELKF91]

Dan said he’s not a hucker then proceeds to say he wouldnt go anything bigger than 10 stair! I feel like a hucker hitting a 6 🤣🤣🤣

[@hazsneax]

Another great vid, keep it up fellas #SkateOrDie

[@papichulocod]

do a review pf the stage 4s!!!!

[@idmhead0160]

Yeah, WTF. Ben slacking on the most earth shattering news in decades

[@ryanhingorani4019]

Please do more collabs with Dan!

[@Makabert.Abylon]

Ben said his front toe side wheel are the smallest one. Its the same for me, and toe side wheels in general takes more pressure for me. I would guess its just how you skate, or if your board wants to go a bit left as a regular skater you might put a bit more pressure toe side high up on the board when you push especially 🤷🏻‍♂️ Anyone else who get one smaller wheel after a while?

[@3_MiL]

same! front toe side wheel for sure. then back toe side :p

[@SabrinaMorris]

Yep. Front toe wheel always is worn down first. That's why rotating the wheels makes them last longer. I'm surprise more skaters don't do this or talk about it in vids.

[@burna803]

Anyone know what woodshop made the alien workshop boards when they prdoduced the mind field decks? Loved the shape and feel of the Arto Saari 8.5

[@skwibblez9239]

I think PS Stix, but I might be wrong

[@imnotarob0t1984]

The Etnies Arto's were incredible skate shoes as well

[@yabo7106]

I have one of your old Canadian skate shops decks you named the Voldemort deck. Before I got the deck I was skating my old one every day trying to learn the Ollie and messed up my knees. I never got a chance to skate it because I was afraid to hurt my knees even more. I'm probably gonna start skating again soon. Wish me luck

[@versnellingspookie]

What exactly hurts in your knees? I was watching a Chad Caruso video yesterday, and he said that as he's now pushing across america (3000 miles in total), and by day 6 his knee issues somewhat lessened (he said he re-tore his meniscus 6 months ago). Also, i have hypermobile knees and have kept off skating for the longest time because im still a bit heavy at 240 ish pounds), but i feel like i've been missing out on knee strenthening excersises, and thus missed out on ways to strenthen my body. Maybe you could start doing excersises to strentgthen whatever issue it is that you're having too?

[@scottmccrimmon1]

Front toe side and rear heel side wear out fast for me - I’ve got a fortnightly wheel rotation madness thing going to keep them even lol

[@solidbluebrian]

Same

[@anhiirr]

same thing here with the wheel wear, conical fulls help wear less but you still have to rotate the front toe wheel with others to keep a set going when they are radial full or classic shape for me or it totally cones out.

[@luger9857]

I've always rotated my wheels so idk but while your riding /turning one of the 4 wheels might have to slide a little and the one doing the sliding is the wheel with the least amount of weight on it