DANA 44 CROSSOVER/HIGH STEER KIT WITH KNUCKLES

WE GET TO INSTALL A NEW COMPLETE CROSS OVER/HIGH STEER KIT WITH KNUCKLES. HEAVY DUTY AMERICAN MADE STEERING KIT. WE ARE REPLACING THE OLD CROSS OVER STEERING THAT WE RECENTLY INSTALLED ON THIS OLD PICKUP. (The DOM tubing isn't included in this kit) YOU CAN ACTUALLY SAVE MONEY WITH THIS KIT, BY PURCHASING YOUR DOM TUBING LOCALLY. THE DOM TUBING IS ABOUT $18 FT. "GREATAUTODEALS" HAS A KIT WITH TUBING AVAILABE IF IT IS EASIER TO GO THAT ROUTE. THIS KIT WAS SUPPLIED BY EAST WAST OFFROAD PRODUCTS, E.W.O. (GREATAUTODEALS) ONLY SELLS THEIR PRODUCTS ON EBAY, SO CHECK THEM OUT.
(EAST WEST OFFROAD PRODUCTS = GREATAUTODEALS)
This kit only found on eBay;
GM/CHEVY/JEEP DANA 44 COMPLETE 1-TON CROSSOVER HIGH STEER KIT-W/KNUCKLE
www.ebay.com/i...
#chevy #4x4 #squarebody #CROSSOVERSTEER #offroad #dana44 #eastwestoffroadproducts
music provided by CapCut;
“Surf music of teketeke sound” HAKUROU
“Cafe BMG/jolly Gypsy jazz guitar” Hanadayama music lab
“Bluegrass BGM of heartbreak” 2Strings
Questions, ideas or thoughts, please email us at
[e-mail]
‪@Farm10customs‬

[@GenerationX1971]

Nice looking kit. Good job 👍

[@Farm10customs]

Thank you. I was very excited about it. All ready to hit the trail hahaha. Thank you for the support my friend.

[@bruceb6262]

Great Video Can you please share what brand/model wheels you are using nice set. Thank You

[@Farm10customs]

Thank you. Those wheels are the Raceline 887 “Rock crusher” 17x9. Thanks again for watching and for your comment

[@MTJ1986]

Second video of yours i have watched! I like your style and projects! Subscribed as well!

[@Farm10customs]

Thank you, I really appreciate that. Thanks for watching and for the support my friend.

[@lorollinls]

What pitman arm and crossover steering brand/setup did you use sir? Thank you for sharing.

[@Farm10customs]

There’s a company in Washington state that makes these steering kits. They are excellent products but you can only order them through eBay under the “Great auto deals” the company is called “East west off road products” I believe the link is in my video description, if not it’s not too hard to find there on eBay. I can look for the link if you are struggling with it. Just let me know. They also have the drop pitman arm as well. Best of luck my friend

[@lorollinls]

@ Roger that! I’ve seen these on eBay and was curious about how tough they are. How has it held up for you, any issues? Thank you sir!

[@Farm10customs]

So far this stuff has been great. I’ve been really impressed with these parts and I really don’t foresee any problems with them.

[@lorollinls]

@ awesome, thank you again!

[@Farm10customs]

You’re so welcome and have fun

[@Tony1775Tone]

Thanks for the video I ordered the kit and am getting ready to install it. What ID size should I buy for the DOM tubing?

[@Farm10customs]

@@Tony1775Tone That’s awesome. I love this kit, it was way easier than the last one I put on. I picked up 1” ID, 1/4 wall DOM TUBING. Hope this helps. Thanks for watching and Have fun with your project my friend.

[@derickmosbacker9513]

May I ask why you got new knuckles after doing all the milling to the stock knuckles? Are these ones more heavy duty

[@Farm10customs]

Yes definitely, they are better. The mounting surface area for the arms are larger and have one more stud each side 4 studs instead of the 3. The old ones are fine but the new ones are better.

[@McMahonSteve]

I typically hear about swapping steering box when going to crossover/high steer. What's the need for this? Will original box not work (with pitman arm repositioned)?

[@Farm10customs]

Hey there. Sorry, I did a brief explanation. The only difference between these 2 boxes, are the pitman shafts. The drop pitman arm that is needed for the conversion has a tapered splined shaft that only fits the 2 w/d steering box. The 4w/d box has a shaft that is completely different in that way. I hope this explains it better. Thank you for your comment.

[@McMahonSteve]

@@Farm10customs got it, thanks for the explanation. I was confused because on my project I already have the tapered spline box, a previous owner much have swapped in a 2wd box already 🤷🏼‍♂️

[@Farm10customs]

@@McMahonSteve That’s great, you’re all set up. You must already have cross over steering then?

[@McMahonSteve]

@@Farm10customs not yet, but parts have been ordered

[@Farm10customs]

@McMahonSteve Excellent. That should be fun for you. Are you doing a complete kit?

[@hawkynz]

What size tubing did you use?

[@Farm10customs]

@@hawkynz I used 1” ID.- 1/4 wall DOM tubing. I believe it’s 1 1/2” OD. You can typically get it at your local metal supplier.