DAP-1360 Setup Video

DAP-1360 Setup Video
In case of any difficulties please feel free to contact our below mentioned support channels:
1. Toll Numbers: 18602333999/08322856000
2. Email or Chat support: service.dlink.co.in
3. CCTV mobile support: 7066345591
4. CCTV Toll support: 08326689999

[@octaviancovali9031]

A great job! I have not managed to set up as a router until I found your video. Thank you very much! Instructions in the manual are good for nothing.

[@darrenoelofse4578]

Thank you for your help 🙌🏼

[@stembyabir2212]

Thanks for your video. Well explanation...

[@emran142]

Thankss allot man, even my IT person failed to resolve this

[@makabebe9515]

Thanks man, really fast and helpful.

[@batorhorvat1915]

TY very much!!!

[@vincenzokorras8365]

I love u thanks so much 🎉🎉🎉🎉

[@chaimamarch9709]

Thank uuuuuuu

[@danielmaltese]

Thanks!!

[@amirtekari2911]

Hey, Thank you for the instructions, do I have to keep the internet cable on the Dap after the set up ?

[@DLinkNews]

Hello, If the DAP is configured in the access point mode then you will have to keep the Ethernet cable connected. If configured in repeater mode then you can unplug the Ethernet cable.

[@amirtekari2911]

@@DLinkNews Thanks a lot, really appreciate

[@Rajasekar-xn4oi]

Super

[@KazmiTV]

supper g

[@patmckune2681]

Thanks.... Is there any way of renaming the repeater access point ? I ask as in some areas of my home devices pick up the weaker of the 2 wifi signals which both have the same name (access point & repeater), so I have to go to the room that the stronger signal is coming from and connect there and then return to where I was sitting.

[@DLinkNews]

There is no option to change the wireless name of the wireless network created by the repeater.

[@PauloCesar-rj1jt]

Great tutorial!! Thanks I have one question! With that DAP-1360 repeater, I can config it for Repeater mode so that it connects by wifi to my main router and expand the signal, and I can connect a RJ45 cable to the LAN port and connect it right in my computer to get better signal? Or it only provides Wi-fi signal in repeater mode? I have bad signal in my computer office, but the router is in a part of the house far from my computer so I dont have way to connect it with RJ45 directly in the main router. So my idea was to buy this DAP-1360, put in my office, configure it as repeater via Wi-fi to the main router and then connect my PC with RJ45 to the DAP-1360 repeater. Was I clear? Let me know if you can help me! :D Thanks for your great content!!!

[@DLinkNews]

DAP-1360 configured in Repeater mode provides internet access from both Wi-Fi as well as from LAN port of DAP-1360. Yes!, you can access internet from LAN port of DAP-1360 to your PC.

[@tknoodle]

Nice. Now D-Link needs to fix the printed instruction manual to actually tell you about setting the static IP and the address of the router...!

[@DLinkNews]

We would like to know if you are still facing the issue with the device, We request you to call our Toll no: 18602333999 ( Mon-Sat between 9 am to 6 pm) if this is not reachable then try calling on 08322856300 / 08322856000 or write to us on helpdesk email/chat support regarding your exact problem with device. We shall be glad to help you resolve the same. In case you have a hardware failure you can also directly visit your nearest D-Link service center address given on D-Link website.

[@oddguyamaar9191]

Its a bit different in windows 10 could you share the settings for windows It needs Ip adress Subnet prefix length Gateway Preferred dns Alternative DNS

[@DLinkNews]

We would request you to call our Technical Support at 1860-233-3999/08322856000/08322856300. Technical Support is available 9:00am to 6:00pm (Monday-Saturday).

[@kheirouboutira1342]

tu ma sauver la vie

[@khansahab9194]

Thanks

[@aketudat]

super useful, cheers!!

[@user-ku5qm9ck5y]

For win 11 how can i find network preferences? Or how can i do the rest of sittings, olso if the "D-link" open network doesn't exist when the device working after a did the reset to it is that mean the device isn't working or what should i do to make it working as a repeater to my Wifi ?!!

[@jjkopman01]

Hi, why would I not be able to pick up the main router in repeater mode?

[@gretellopezsandoval4364]

Today 05/18/2020 i was trying to set up my router but when try to go to 192.168.0.50 it doesn´t opens and i try it on my phone too and it says that the time of response expired or something like that so i can´t continue with the set-up

[@atomiklyt7342]

It's not your fault, it's the stupid D-link that don't give DHCP plus this idiot video maker that didn't explain how to setup by WPS

[@sulphikerps9843]

Same issues

[@chamilarathnayake3399]

Can you please show how to configure the access point mode

[@roalexmolina9968]

What is the wireless client mode use for and what is the difference between wireless client and repeater mode? Thanks

[@DLinkNews]

In a wireless client mode the device is allowed to becomes a wireless client to another AP or wireless router and in a repeater mode it will repeat the wireless network of another router.

[@dvhgaming5767]

Where did you enter in youre laptop

[@rafikben7829]

You could close a WPS ?

[@vinivfx4929]

Pls explain 3rd LeD...... our device showing lock led....and its not working..pls explain

[@12monosxs]

Hey thanks for the video. Do you know how I can change the name of the WiFi the is the extension one to have different names

[@DLinkNews]

We would like to inform you that it is not possible to change the name of the extended wireless network in this device.

[@12monosxs]

Ok i got it so I’m using it to conectado the computer but once is set up I can’t enter again to the dap access options because if I enter 19216811 I enter in the internet modem but impossible to conect to dap also when is working as a repeater without cable thanks for your help

[@Abalone6]

When i finally click save, it doesn’t ask me in a pop up if i want to reboot or not. It takes me again to the first page. What’s the problem ?

[@PanagiotisWest]

Same...

[@DLinkNews]

We request you to kindly contact us on 1860 233 3999 between 09.00 AM to 6.00 PM Monday to Saturday or you can drop us an email on [e-mail]. You can also chat with a live technician by clicking on the link below. dinscrm.dlink.com.tw/LiveChat/productslist.aspx

[@abduzzahirchandorwala8226]

I'm facing the same problem...any solution?

[@abinashyadav2233]

how to enable auto emailed logs on DAP1360 to myself by clicking on the Log setting on the repeter

[@DLinkNews]

We request you to call our Toll no: 18602333999 ( Mon-Sat between 9 am to 6 pm) if this is not reachable then try calling on 08322856300 / 08322856000 or write to us on helpdesk email/chat support regarding your exact problem with device. We shall be glad to help you resolve the same. In case you have a hardware failure you can also directly visit your nearest D-Link service center address given on D-Link website.

[@jabirislam5709]

This repeater can connect with Tp-link router?

[@DLinkNews]

It can repeat the wireless network of any wireless router and also can be configured as an access point through an existing router.

[@bishal1125]

Hi, when I setup my ipv4 by changing the ip address and subnet prefix length in my laptop, my laptop is not accepting it.

[@DLinkNews]

What is the IP address you are entering?

[@BsTyLerPcGameplay]

can u limit the the net speed with this one is there an option ?

[@DLinkNews]

We request you to kindly contact us on 1860 233 3999 between 09.00 AM to 6.00 PM Monday to Saturday or you can drop us an email on [e-mail]. You can also chat with a live technician by clicking on the link below. dinscrm.dlink.com.tw/LiveChat/productslist.aspx

[@btuhhh]

Is it mandatory to connect ethernet cable to laptop

[@m.r.ravjani1944]

how can i setup my (D-Link Wi-Fi Range Extender/Access Point) 7-in-1 DAP-1360) and setup file required

[@DLinkNews]

We request you to drop in a mail at [e-mail] with you product and contact details.

[@hashemvo8841]

india number one. mmmwah

[@midocazanova3779]

هل بالإمكان تغير كلمة السر Dlinck بالهاتف وهل هناك تطبيق

[@Abinash_Yadav]

Hey how to logout the router set up page on this repeater say me

[@DLinkNews]

There is no option to logout as such , you can close the page once you finish configuration

[@muhammadnaiim6977]

Hi after the reboot my signal is there but i cant it says no internet connection if i connect with other wireless device such as phones and laptops

[@muhammadnaiim6977]

And i cannot open 192.168.0.50 but i setup the connection using http:/dlinkap/

[@DLinkNews]

We would advise you to update the latest firmware on the device. you can check the latest firmware on our website for the device.

[@daniloguimaraes2673]

I dont have a computer how Im going to setup my Dap-1360? Pls help

[@DLinkNews]

You would require a computer or a laptop to setup the device for the first time. Once the setup is complete then you can use your mobile phones or wireless devices to connect to the network.

[@rimzart9896]

My laptop doesn’t match the yellow cable what can i do ,, I already was connected it ,, but i want to check out bc the wifi doesn’t work like before ,, pls help me sorry for my band eng 💔

[@DLinkNews]

We would request you to call our Technical Support at 1860-233-3999/08322856000/08322856300. Technical Support is available 9:00am to 6:00pm (Monday-Saturday).

[@Rajasekar-xn4oi]

@@DLinkNews hi

[@gourabsarker8266]

can you say me how much meter it can cover?

[@DLinkNews]

It will cover a distance of 15 Meters in clear line of sight and ideal conditions.

[@muhammadrayyan735]

Its not rebooting after connecting to other wifi

[@renny3603]

Can I remove the Ethernet cable from my laptop and the router

[@renny3603]

In another comment I said I can't change the name but I could and tried to change to avoid confusion and added extender and it worked.Just asking can I change the name also?

[@DLinkNews]

Yes you can remove the cable.

[@Abinash_Yadav]

How to log out router set up page on DAP-1360.

[@DLinkNews]

There is no option to logout as such , you can close the page once you finish configuration

[@Abinash_Yadav]

Bro how to use the Bridge with AP mode this mode is wireless or not

[@DLinkNews]

For this mode you will require two DAP-1360 which will create a wireless bridge among them.

[@Abinash_Yadav]

@@DLinkNews it means it is for a wired connection only

[@gunjansanghvi_]

What does the lock symbol tell?

[@DLinkNews]

Lock symbol indicates that wireless security is enabled

[@shadilp8582]

My extender router is not finding my wifi while its finding another , can u please help

[@DLinkNews]

We would request you to call our Technical Support at 1860-233-3999/08322856000/08322856300. Technical Support is available 9:00am to 6:00pm (Monday-Saturday).

[@Abinash_Yadav]

Hey can you please give me the latest firmware of this dap 1360

[@DLinkNews]

Request you to kindly drop in a mail at [e-mail] inquiring for firmware with current harwdare and the firmware of the router which you will find on the white sticker beneath the router.

[@nat0106951]

how much is this???

[@yasir9293]

Sir how connected DAP 1360 wifi to mobile phone

[@akberish]

unable to connect my wifi network in repeater mode!!!

[@DLinkNews]

Kindly check the password and the security settings on the back end router. As the security settings on the repeater has to be the same as that of the router.

[@nileshkenekar8869]

Dear Sir, How to find IP address which have put in Computer...

[@DLinkNews]

We would request you to call our Technical Support at 1860-233-3999/08322856000/08322856300. Technical Support is available 9:00am to 6:00pm (Monday-Saturday).

[@mehdilagab6354]

Is it possible to configure it with an android phone?

[@DLinkNews]

yes it is possible , but we recommend connecting a system wired to the DAP-1360 and configuring it.

[@mehdilagab6354]

@@DLinkNews I couldn't and I didn't have a pc nearby, so I configured it with my playstation console navigator haha 😁

[@preliator1816]

Can't access the 192.168.0.50 in browser

[@elsapoimenidou]

Me too

[@DLinkNews]

You can assign static IP address on the LAN card of the computer which is connecting to the Access Point with a cable and try accessing.

[@Abinash_Yadav]

My neighbor automatically access the router set page without psk how to ristrict him After locking the username and password he open the setup page without any psk .

[@DLinkNews]

Dear D-link Customer, for a quicker response to your query we request you to mail us on [e-mail] or alternatively, you can call us on our toll-no: 18602333999,08322856000 or 08322856300

[@chihab8623]

GUYS MUSIC NAME PLZ

[@kashinadhan3435]

I'm not getting the web page

[@DLinkNews]

Assign static IP on the computer that is connected to the LAN in range of 192.168.0.x and try accessing the web page.

[@nawees293]

price in pakistan ???

[@johnangeloolaso4847]

help!! can't access the IP 192.168.0.50

[@DLinkNews]

You can assign static IP address on the LAN card of the computer which is connecting to the Access Point with a cable and try accessing.

[@LM-tq1ev]

@@DLinkNews how????

[@boubkerhamzi5263]

help please

[@rathod12]

Dear Boubker pleae call 08322856300/08322856000 ans we shall gladly help you.

[@chaiysumpovlun2217]

Ko បាតចាស់\អណុណ

[@my7amid]

Can't act as router?

[@DLinkNews]

No, this does not have router mode option.

[@abdallah-ft2nj]

Cant acess the ip adress

[@DLinkNews]

You will have to assign static IP address on the LAN card in range of the access Point.

[@gretellopezsandoval4364]

@@DLinkNews and what do i do if its the same 192 168 0 50 and dlinkap and it doesn´t work

[@DLinkNews]

@@gretellopezsandoval4364 Request you to kindly call on our technical support number 18602333999 between 9.00 AM to 6.00 PM monday to saturday.

[@Abinash_Yadav]

Can you please give me your email I have many trouble to this Router setting plz .

[@DLinkNews]

Dear D-link Customer, for a quicker response to your query we request you to mail us on [e-mail] or alternatively, you can call us on our toll-no: 18602333999,08322856000 or 08322856300

[@Capricius]

10q

[@tonytoller]

This is no help to me. You waste time showing what's written on and what's in the box - I know that - but then when you get to the important stuff, 2 mins 19 seconds, you start opening up windows but with no indication whatsoever of where from. Like where do I find "Open Network Preferences"?

[@DLinkNews]

The router configuration in the above video is done on a MAC computer. If you are using a windows operation system, you will have to open control panel and got to network and sharing center. Under that you will have to click "Change adapter settings" and under Local Area connections you will have to assign the mentioned IP address.

[@tonytoller]

@@DLinkNews Ok thanks. I appreciate the reply.

[@dalileddineslimani6399]

Gimme music name or i'll report your video because you didn't mention music name there is a copyright sound on this music.

[@abinashyadav2233]

how to enable auto emailed logs on DAP1360 to myself by clicking on the Log setting

[@DLinkNews]

We request you to call our Toll no: 18602333999 ( Mon-Sat between 9 am to 6 pm) if this is not reachable then try calling on 08322856300 / 08322856000 or write to us on helpdesk email/chat support regarding your exact problem with device. We shall be glad to help you resolve the same. In case you have a hardware failure you can also directly visit your nearest D-Link service center address given on D-Link website.

[@abinashyadav2233]

how to enable auto emailed logs on DAP1360 to myself by clicking on the Log setting

[@DLinkNews]

We request you to call our Toll no: 18602333999 ( Mon-Sat between 9 am to 6 pm) if this is not reachable then try calling on 08322856300 / 08322856000 or write to us on helpdesk email/chat support regarding your exact problem with device. We shall be glad to help you resolve the same. In case you have a hardware failure you can also directly visit your nearest D-Link service center address given on D-Link website.