DATALOGGING A CARS ECU SO YOU CAN SEE WHATS GOING ON IN YOUR ENGINE!

[@mrcurtis3714]

blue tooth setup ill be waiting for your video.

[@DIYKAI]

We have one out for tuner view

[@righty-tightybuilt548]

Is there a knock option for the graph? Where you can see if the car is knocking at certain rpms and go in and adjust it? And would you have to have a knock sensor in order to use that feature? My car doesn't have a knock sensor but I want to try and tune mt timing tables a bit more in depth to see if I can find a max timing position before I start to knock

[@DIYKAI]

no sure I don't use a knock sensor

[@Peisss]

How to empty/clear live datalogging table? that graph table.

[@lewispagan193]

Idk if ur still around but what if I have 1998 Acura Integra ob2 with a p28 none vtec and im try to get live data but I can’t figure how i can I’m chip but I can’t figure out how to get the live data to know what’s going on

[@DIYKAI]

Do you have the CN2 port installed

[@lewispagan193]

@@DIYKAIno I don’t

[@DIYKAI]

You need to add a CN2 port, cut a resistor, and have a data logger with HTS or another software of your choice

[@meditationlife9337]

Any ttl to usb cable can we use for datalogging from ecu sir.Thanks for your video!!!

[@DIYKAI]

Yes I used one from a cell phone

[@chriscoatess3600]

Old Nokia technology

[@DIYKAI]

@@chriscoatess3600 Works like a charm still

[@prestonking5692]

So to datalog you need to add something to the datalog spot on ecu what exactly do you put there and when its put in you run a usb to your computer and it links hts with it?

[@DIYKAI]

You need to chip the ecu and add a datalogging header pin. I have a video covering this as well. Yes you will need some type of ftdi to usb cable/controller or a hulog or any emulator that has one

[@affantirmizi5732]

Can we do datalogging on p08 ecu? And will it allow us live tuning to make changes in the map?

[@DIYKAI]

Yes as long as it's OBD1 and has a slot for the chip....

[@affantirmizi5732]

@@DIYKAI I connected the cn2 ports with a usb and it's not showing the datalog. I have also installed the suitable ftdi drivers

[@affantirmizi5732]

My com port is not visible in device manager

[@DIYKAI]

The cn2 requires a specific interface what are you using

[@henryserrano6510]

What simulator you use?

[@DIYKAI]

An FTDI one

[@peterle_garage]

Hello friend, thanks for the video, I would like to know if it is possible for me to make a datalog with the oem ECU. That is, with original map.

[@DIYKAI]

Yes it should be possible as data logging comes from the CN2 port

[@drjuju]

Did you ever make that next tuning video?

[@DIYKAI]

Unfortunately not yet. Motor is out still I am deciding which way I should go with the block and had a few things to do to another vehicle. I do plan on making one very soon. Thank you for asking comments like this keep me on my toes and making them 👍

[@DAAN_MUSIC]

Retweet above comment. Your stuff is good man. 🚘🎯

[@DIYKAI]

Soon just been super busy with all the other projects

[@cansinoqurtanthonyp.4677]

Do tou need ostrich to change the map in real time?

[@DIYKAI]

Yea you do or some type of emulator

[@cansinoqurtanthonyp.4677]

Does it work if you have only sst chip

[@DIYKAI]

No you will need data logging and an emulator

[@Uncertain_Slide]

so how do you add and take fuel correctly

[@DIYKAI]

That will be in upcoming videos stay tuned

[@rollthelosingdice]

Do you need to tune with emulator and data log before burning the chip?

[@DIYKAI]

No

[@rollthelosingdice]

Can you make changes then with just the datalogger hooked up and the basemap chip in the socket. How exactly do you get the AFR corrections to the chip?

[@DIYKAI]

No you will need an emulator to do live changes

[@jesusurbina334]

I got a BMulator, that does not work with HTS does it?

[@DIYKAI]

Unfortunately the owner of BM has been at odds with HTS for a while now so I would mess with the setting a little and contact Marc see if he responds and can help

[@jesusurbina334]

@@DIYKAI awesome how can I contact mark?

[@DIYKAI]

Did you buy it directly from the website?

[@jesusurbina334]

@@DIYKAI no it’s out of stock right now I bought it off my friend who did

[@DIYKAI]

@@jesusurbina334 I believe his contact info is on the website

[@meditationlife9337]

Can l programming hc05 bt module pressing AT button with ft232 ftdi connecter bro?

[@DIYKAI]

I will have to look at mine

[@meditationlife9337]

@@DIYKAI Thanks so much:)

[@DAV4WSR1]

Great , thank's for advice :)

[@DIYKAI]

Your welcome

[@meditationlife9337]

My map has lots of waves

[@DIYKAI]

Check my other video smooth it out

[@meditationlife9337]

@@DIYKAI thanks so much Brudas:)

[@DIYKAI]

@@meditationlife9337 YW