Thomann 6u rack case ART MPA II digital - ART SCL2 - TASCAM SD 20M
Пікірлер: 49
@agustinglenny4 жыл бұрын
Cool man!
@pedrolarenas Жыл бұрын
beautiful¡¡ i want one of this, i have one presonus 24 and one PA2, I need 6 u or with one of 4 u is enough for me?
@giffyfaces Жыл бұрын
I'm looking for a similar style case with brackets but they are ridiculously expensive fir riding little
@DavidvanLochem Жыл бұрын
I bought this one for about 100 €. It's a 6U, I should have taken a 8U. Then I had to buy screws a power strip and a door to close the back (to avoid dust to enter to easily).
@nobodyknows45088 ай бұрын
Hello, can you explain for what purpose folding hook on the right upper part of the rack used for? I'm about to assemble my own rack and wonder if i need it either:) Thank you!
@DavidvanLochem8 ай бұрын
I use it to hang my headphones. so the cable is not in front of buttons and sceens.
@Divinskymusic3 жыл бұрын
Hi David, Could you please explain the audio chain in this video? Great demonstration Thank you !
@DavidvanLochem3 жыл бұрын
Since this vidéo, the Tascam (had a problem with XLR getting stucked in inputs) has been replaced by a Denon recorder (inputs on the back of the unit) : Panel in XLR > ART MPA II Preamp > (insert in) ART SCL compressor (insert out) > ART MPA II Preamp > (AES/DBU in) Behringer Ultracurve Pro (AES/DBU out) > Denon 500 R > Panel out XLR (monitoring)
@DavidvanLochem3 жыл бұрын
latest version shown here guitar.vanlochem.be/rack_enregistrement-19-pouces/ (sry in french)
@Divinskymusic3 жыл бұрын
@@DavidvanLochem Thank you very much :)
@abdalmuhsseinalhussein8864 жыл бұрын
Hi / Video without sound Possible to distribute the wires on the shelves in writing
@DavidvanLochem4 жыл бұрын
current config : Panel in XLR > ART MPA II Preamp > (insert in) ART SCL compressor (insert out) > ART MPA II Preamp > (AES/DBU in) Behringer Ultracurve Pro (AES/DBU out) > Denon 500 R > Panel out XLR (monitoring)
@CDJPRODJ Жыл бұрын
What is the name of the power strip that you put in last? Thanks.
@DavidvanLochem Жыл бұрын
T-racks Power 8
@ishaandobhal63973 жыл бұрын
Hi David. Can you please tell me if this rack case is good enough for a band. We will be practicing and doing our live shows (travelling) with all out gears in it. We will be having our on stage monitoring system in a 12u Version of this Thomann Rack case. A digital Mixer, a headphone amp, a power conditioner, router, spiller etc.
@DavidvanLochem3 жыл бұрын
I think so. If you don’t throw it around.
@ishaandobhal63973 жыл бұрын
@@DavidvanLochem ha ha obviously not. Thanks for the blazing fast reply.
@SolAcu009 Жыл бұрын
hello! may i ask for the name of those xlr jack/plugs you used on that blank panel with the 2 xlr male and 2 xlr female jacks? i see that they dont require any soldering and id like to know what theyre called. thank you!
@DavidvanLochem Жыл бұрын
Neutrik NA3 MDF and Neutrik NA3 FDM
@SolAcu009 Жыл бұрын
@DavidvanLochem appreciate the reply brother thank you!
@FMSax4 жыл бұрын
What is the brand model and make of your Power Conditioner? What I see is what I am looking for.
@DavidvanLochem4 жыл бұрын
It's not really a conditionner, I skipped it since the gear has integrated transformers, it's the t.racks Power 8 S French from Thomann
@FMSax4 жыл бұрын
@@DavidvanLochem Thanks
@agustinglenny4 жыл бұрын
The front patch for XLR INs and OUTs, how did you do that? What's the name of the single pieces? All XLR pieces i find need soldering and don't know much about it...
@DavidvanLochem4 жыл бұрын
Agustin Glenny Neutrik NA3 FDM and Neutrik NA3 MDF
@agustinglenny4 жыл бұрын
@@DavidvanLochem Nice, that's what I needed. Thank you!!
3 жыл бұрын
What's that "Antenna" thing you screwed at the end? it is screwed on the top right over the TASCAM piece of gear.
@DavidvanLochem3 жыл бұрын
a support for my headphones
3 жыл бұрын
@@DavidvanLochem damn! That's so cool! What brand is it???
@DavidvanLochem3 жыл бұрын
@ thon if i remember well
3 жыл бұрын
@@DavidvanLochem it is! Omg that's so cool! Thanks!
@kensmechanicalaffair2 жыл бұрын
How many Art sized compressors do you think you could fit?
@DavidvanLochem2 жыл бұрын
as they are standard size in a standard rack it depends of the number of U heights.
@mellowmonsoon2784 жыл бұрын
So, that gear doesn't need any support to hang at the back of the rack? They just stay horizontal just from 4 screws?
@dekhruel4 жыл бұрын
This is how rackmount gear's working...
@mellowmonsoon2784 жыл бұрын
@@dekhruel That was my question. ok
@ibnu96302 жыл бұрын
what is the brand name of the shelf
@DavidvanLochem2 жыл бұрын
THON (from Thomann)
@ibnu96302 жыл бұрын
@@DavidvanLochem thank you
@Ratishmuxic3 жыл бұрын
What is the internal depth of this case ?
@DavidvanLochem3 жыл бұрын
Installation depth: 42 cm (more info : Thon Rack Case 6u from Thomann)
@DerekHundik4 жыл бұрын
what all that gear for ?
@DavidvanLochem4 жыл бұрын
it's a mobile recording rack
@kimuzaky8179 Жыл бұрын
Merek rak acc
@mamartin733 жыл бұрын
Is that a 4u or 6u rack?
@DavidvanLochem3 жыл бұрын
6U
@SAMSAM753 жыл бұрын
PAS DE SON DANS VIDEO
@DavidvanLochem3 жыл бұрын
comme mentionné dans le titre ...
@SAMSAM753 жыл бұрын
@@DavidvanLochem ok ont espéré d autres tuto svp avec son cordialement