David Tubb's Approach to Load Development

  Рет қаралды 67,852

Long Range Shooters of Utah

Long Range Shooters of Utah

Күн бұрын

Пікірлер: 242
@godofm3tal1
@godofm3tal1 4 жыл бұрын
The frustration on that man's face hurt my soul 🤣 like i can just feel what he's feeling and i can't blame him one bit. Let the man talk. He's the legend. He's the one you and everyone else want to hear.
@mikedoyle7020
@mikedoyle7020 3 ай бұрын
No kidding! I had to turn it off because that guy kept talking all over David .
@rileybaxter5421
@rileybaxter5421 5 жыл бұрын
Lmfao David looks so exasperated from Bryce’s interjections 😂😂😂
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
I was cracking up the whole time I was editing it. This was actually take two, take one was PHD level 100% and even I was getting a bit lost in all the details so I twisted David’s arm a bit to dumb it down for the rest of us. He’s been at it for so long and knows so much that he has his own language that most viewers just wouldn’t understand. I didn’t want the video to leave more questions than answers. When discussing dies I had to suggest that most guys struggle to justify spending $160 on a set of Redding’s let alone $250-300 for custom does and he looked at me like I was nuts. Lol. I love David but I’m not all too sure he feels the same about me. Lol. 😂
@charliejensen2934
@charliejensen2934 5 жыл бұрын
@@LongRangeShootersofUtah You did a great job, and thanks for posting. So much good stuff covered even for us that have loaded for so long.
@JoeBlogster
@JoeBlogster 5 жыл бұрын
@@LongRangeShootersofUtah If I may offer some constructive criticism; when interviewing an expert, let the expert do the talking. While your concerns are appreciated, interruptions are almost never the best way of addressing those concerns. First off, give your viewers some credit. I doubt it was really necessary to interrupt him to clarify what ID means. That's a simple enough term that if you don't understand it, you probably shouldn't be reloading (and that's not meant as sass; it's a genuine concern for an activity that can seriously injure if done improperly). Second, if educating new-comers is a priority, consider less intrusive solutions such as including a on-screen note or “card” during editing. At the very least, wait for the speaker to finish his train of thought and then clarify. That way you get both the PHD level talk and the entry level explanation. Otherwise it was a good interview.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
That's funny because I myself had no idea he was talking about Inside Diameter when he said ID. But I guess I'm just a dummy but I'm certain I'm not alone. What none of you realize is this was the second take of this interview because the majority of the first one was way over even my head and lacked any kind of structure so on take two I may have taken it a bit too far. Keep in mind these are unrehearsed interviews, done in one single take and I'm not getting compensated for doing them. I've been told by more people, even those close to David, that is the vest interview they've seen because it was broken down in layman terms and not ten miles above the average guys head. David knows more than most of use ever will and he's accustomed to talking in those terms so I wanted to break it down for the overwhelming majority of my viewers who are just getting started. All this negative feedback when it cost so much and takes so much effort to make these videos when I get jack squat from it is really frustrating.
@JoeBlogster
@JoeBlogster 5 жыл бұрын
@@LongRangeShootersofUtah I hear that. And please don't get me wrong. I understand the frustration of existing on a somewhat thankless internet; not least of which is how text strips tone of voice from a message. Sadly on the internet that tends to result in a passive-aggressive tone coming across when it was never intended by the writer. I do hope that wasn't the case here. Your overall interview was very good. I just wanted to offer some tips on how to become better. I mean heck, I've subscribed to your channel so I clearly appreciate your stuff overall. :-)
@MegaPoxie
@MegaPoxie 4 жыл бұрын
I thought David was going to talk, he is way more patient than me!!
@MrRichardbryan
@MrRichardbryan 5 жыл бұрын
David Tubb is really a nice man. I met him at the NRA convention , I believe in Louisville, Kentucky . I was telling him of some of the problems with cycling on my 6.5 Grendel. He was so interested in helping me he was going to give me a recoil spring in his bag to see if it would cure the problem.
@richiegonzales6750
@richiegonzales6750 5 жыл бұрын
Hands down one of the best interviews that I have ever watched. Mr. Tubb dropped alot of knowledge on all of us there. The look on your face multiple times throughout that conversation was pricelss. Thank You for sharing with us. Glad that you were able to spend time with him.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Thank you! Please subscribe if you haven't yet. Check out our interview with Mr Tubb last year and our other interviews with John Krieger & George Gardner.
@frankbellinger605
@frankbellinger605 10 ай бұрын
WOW!!! I've been reloading for 8 years and just recently really started digging into "precision" loading. I learned more here in the last 24 minutes than in the last 2 years!!! Awesome!! This one will be saved to my favorites and RE-WATCHED for a long time!!
@robertruf9778
@robertruf9778 4 жыл бұрын
David confirmed a few things I do and also opened my eyes to many other things I didn't consider. This man is a legend.
@YurrNext
@YurrNext 5 жыл бұрын
David Tubb, the legend! Nice! 👍
@johnx9318
@johnx9318 4 жыл бұрын
When you have an expert who is trying to explain things - shut up and listen.
@jswnv7775
@jswnv7775 3 жыл бұрын
This^
@MrKen-longrangegrdhogeliminato
@MrKen-longrangegrdhogeliminato 3 жыл бұрын
That is so right John, kid is so disrespectful of the best shooter in my life time. SHUT your mouth kid, till Mr Tubb is done explaining.
@MC-wh6xk
@MC-wh6xk 4 жыл бұрын
Having watched the video and reading some comments, especially yours about this being the second take, I'm now wanting to see the first take with the depth you alluded to. Good vid, nice to learn from Mr. Tubb. Thx for your efforts.
@MrWachtmann
@MrWachtmann 5 жыл бұрын
Thats one of the most eye opening interviews i´ve ever seen on load development, thanks for dumbing it down!
@chipsawdust5816
@chipsawdust5816 3 жыл бұрын
Thanks for the video, I learned something. I heard about Tubb over 20 years ago when I started doing my own reloading but never thought about HIM being a reloader! Now I have to go to his site and see what else I can learn. As for the criticisms, let 'em run off your back like water on a duck. If people can do better, they should find Tubb and interview him and see how many people watch the video. Today I see almost 42000 views so you must be doing something right. That he doesn't anneal caught me like it caught probably most folks. But his reasoning is sound. It's those little nuggets of wisdom, things we may have never considered before, that make these little videos so worth watching.
@MrRayray81
@MrRayray81 5 жыл бұрын
Good interview. I always enjoy listening to David Tubb. I would like to offer a bit of criticism. Please ask one concise question and then let him answer, without interrupting him. That is the only negative I can see in this interview. Keep up the good work.
@brianstuart4203
@brianstuart4203 4 жыл бұрын
This video is incredible. So much information it’s unreal
@garithscott8343
@garithscott8343 5 жыл бұрын
That is very interesting about jamming it into the rifling. Thank you for your time shooting this video.
@WestDesertShooter
@WestDesertShooter 5 жыл бұрын
Fantastic conversation dude. Awesome video!
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Thanks buddy.
@JB-xu1pm
@JB-xu1pm 4 жыл бұрын
In the 2004 time frame, David would be on some of the forums and would jump in with excellent pointers. When his DTAC 115's first came out we ordered a batch. We called in and he answered the phone. Very gracious. You can tell the wants the next generation to develop into good to great shooters and riflemen.
@gilbertopadilla3611
@gilbertopadilla3611 5 жыл бұрын
One of the best reloading videos on youtube. Thanks LRSU
@lmbear
@lmbear 3 жыл бұрын
Tubb is awesome. Always cool to hear what he has to say in regards to reloading and shooting. He has a good KISS approach, that you have to respect..
@martingagnon4547
@martingagnon4547 5 жыл бұрын
It's cool to meet people like David, learning from them and laugh a bit too!
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
It's been humbling to get to meet and befriend so many incredible people like David.
@martingagnon4547
@martingagnon4547 5 жыл бұрын
Did you meet 1 or 2 incredible morons too ? 😂
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
It's Shot Show! Of course I did.
@DatMammut76
@DatMammut76 5 жыл бұрын
Such an awesome video with a legend. Thanks for this!
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
My pleasure. Thank you.
@keithalbrecht4785
@keithalbrecht4785 5 жыл бұрын
Great info, lots of ideas to mine tune my loads. David Tubb, love to hear what he has to say about setting depths.
@LoadsofBacon
@LoadsofBacon 5 жыл бұрын
It was awesome meeting you both at SHOT Show!
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Likewise!
@davidlindsay5796
@davidlindsay5796 4 жыл бұрын
Jesus, just let tubb talk man lol
@keithreinert5835
@keithreinert5835 4 жыл бұрын
Lol he is so patient with you constantly interrupting him.
@bawhitham23
@bawhitham23 5 жыл бұрын
Great video! I thought dialogue between You and David was comical. I appreciate your input when Dave started going down the rabbit hole to keep it in simple terms.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Thank you thank you thank you for noticing. I've gotta a lot of flack about interrupting him, etc but folks don't understand how quickly things can go way over the average dudes head when talking with David. This was our second take because the first one was far too technical, I was having one hell of a time keeping up. Thank you again.
@everythingphil9376
@everythingphil9376 5 жыл бұрын
Great interview! I love your reactions to some of his practices. Lol.
@duckslayer11000
@duckslayer11000 5 жыл бұрын
What a great interview!
@njgrplr2007
@njgrplr2007 5 жыл бұрын
Horizontal spread is a function of your seating depth? That's the first time I've heard that, but it is definitely something I will start paying attention to. Very interesting.
@Mattytube18
@Mattytube18 5 жыл бұрын
Thank you, thank you both !
@mikecash6672
@mikecash6672 5 жыл бұрын
Another fantastic video! Knowledge dropped like a MOAB!
@jasonweishaupt1828
@jasonweishaupt1828 2 жыл бұрын
I’m using coal slag for brass tumbling. I’ve also experimented with metal grit and sand. I’ll be trying brass powder next. Metal grit cleans in 15 to 30 minutes.
@ericrumpel3105
@ericrumpel3105 5 жыл бұрын
Yes Sir !!! - he is the Legend & Shooting Competitor Hero !!
@turnerables
@turnerables 4 жыл бұрын
Still don't have a reloading setup but I sure learned alot from this video. Hopefully I'm prepared once I get mine. Great video as always!
@280ackleyimp
@280ackleyimp 5 жыл бұрын
Brilliant job interviewing David and interpreting his theories for the common folk. Every reloader should find at least 1 new tip or trick to experiment with.
@Sydneywizard
@Sydneywizard 5 жыл бұрын
Wow! That really gave me something to think about. Great interview.
@beachboardfan9544
@beachboardfan9544 5 жыл бұрын
Prob the best shot show vid I've seen from this year Much better 👍
@matthennagersguitarlessons
@matthennagersguitarlessons 5 жыл бұрын
Thank you for posting, superb information.
@Greyzonecompliant
@Greyzonecompliant 5 жыл бұрын
Thank you for sharing the wisdom.
@willway9378
@willway9378 4 жыл бұрын
Please publish the phd level video!
@taylorbokshowan5713
@taylorbokshowan5713 4 жыл бұрын
Yes please.
@sterlingwilkey2124
@sterlingwilkey2124 5 жыл бұрын
My brain is ready to explode with all this info. I would love to meet Mr. Tubb
@missourimike5150
@missourimike5150 3 жыл бұрын
AWESOME video thanks for great information!!
@aleembruggen
@aleembruggen 5 жыл бұрын
Great content guys, thanks.
@brendavanorden9550
@brendavanorden9550 4 жыл бұрын
Thanks for a great vid.
@scottinohio701
@scottinohio701 4 жыл бұрын
Best reloading vid I have seen!!!!!!!!!!!!!!!!!!!!!! From the master!!!!
@trashpanda2396
@trashpanda2396 5 жыл бұрын
This is Awesome! I will watch this a few times. Thanks for posting this video. Sub
@georgeholt8929
@georgeholt8929 3 жыл бұрын
David is beyond Expert he is the Master Marksman!
@mattyz28kbrracing80
@mattyz28kbrracing80 4 жыл бұрын
That man has forgotten more than I will ever remember. Interesting take on bullet seating depth. I'll have to try it with my rifle and see what happens. The alternative is getting into annealing, so I'll try the free stuff first!
@Sean-pw3yr
@Sean-pw3yr 2 жыл бұрын
… so he didn’t remember what you didn’t remember?
@Johnyrocket70
@Johnyrocket70 5 жыл бұрын
Best interview I ever seen David do, he usually pitches a product the regular Joe can't afford or his magic unicorn bullets.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
I thought so as well but apparently a good majority thought my input in the conversation was super annoying and distasteful. Makes me consider taking it down.
@Johnyrocket70
@Johnyrocket70 5 жыл бұрын
@@LongRangeShootersofUtah don't you dare take it down. You did fine.
@Johnyrocket70
@Johnyrocket70 5 жыл бұрын
@@LongRangeShootersofUtah the biggest mistake I made this month was buying a ruger precision rimfire then finding out it costed like $49 to much to compete in nrl22 base or factory class. They need to make an exception. It's msrp just over their limit. I cant compete in the open class div because I would need a better barrel to compete. What do you think?
@wilfdarr
@wilfdarr 4 жыл бұрын
@@LongRangeShootersofUtah You did fine. Don't take it down.
@delpittman8056
@delpittman8056 5 жыл бұрын
great info
@patrickedgewood8598
@patrickedgewood8598 5 жыл бұрын
I’ve talked to him on the phone.very knowledgeable and nice guy.
@jacobridgedell2096
@jacobridgedell2096 5 жыл бұрын
Great video! Interesting hearing his reloading practices.. and your astonishment! ha ha
@tikkathreebarrels
@tikkathreebarrels 4 жыл бұрын
Jeepers! It's David Tubb I want to hear, not Little Sir Echo..... I'm not sure I can go on for another 20 whole minutes of excruciating buttinsky.... Oh wait.... "I don't clean my gun, I get crappy groups, what gives?". Every day's a learning day fella.
@wilfdarr
@wilfdarr 4 жыл бұрын
🤯 23:00 So he doesn't aneal, sizes his brass all over, shoots brass up to ~30 times and doesn't split necks? So split necks gotta be primarily from loading too hot?!
@afroghair6793
@afroghair6793 4 жыл бұрын
David Tubb is still the man.
@jameskliewer5809
@jameskliewer5809 5 жыл бұрын
To get the results he gets, you've got to do what he does.
@Johnny-jr2lq
@Johnny-jr2lq 5 жыл бұрын
Ummmmm holy moly this video was full of information for a new reloader I’m glad I watched it
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Thank you. Please subscribe and follow Long Range Shooters of Utah on Instagram and Facebook.
@conservativesniperhunter7439
@conservativesniperhunter7439 5 жыл бұрын
Great to see you talking to the legend David Tubb . In regards to the use of the Hornady lock n load bullet comparator, aren't we better off if we use a once fired fire formed case fired in the particular rifle ( that has been drilled and tapped to fit the lock n load bullet comparator tool ) we will be reloding for that has been sized in a die such as the Redding body die that only sizes the body and not the neck of the case rather than using a modified case supplied by Hornady ? My understanding is that there could well be anything up to .007 or more difference between the Standard modified case supplied by Hornady to a case that has been fire formed in ones rifle .
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
That's a great question. I would think you could easily run the hornady case thru your sizing die and as long as your die is set up with the correct amount of headspace that you want you should be good to go.
@jamiem5364
@jamiem5364 5 жыл бұрын
@@LongRangeShootersofUtah I think Jim meant that its best to use a fired piece of brass from your rifle rather than the ones hornady sell, you can even send them one to get them to drill and tap for this reason. Its easier to just buy a drill and tap if you dont have that size and make your own, thats what i did buy a tap and made my own.
@luvtahandload7948
@luvtahandload7948 5 жыл бұрын
Jim Gourlas You don"t want any sizing of your fire-formed case (arguably) to get the greatest benefit of the Hornady LNL tool. I just went and measured one of my Hornady Modified cases in a Redding Instant Indicator. It is .010" UNDER SAAMI minimum chamber specs. That means it can vary up to .017" from any one chamber.
@luvtahandload7948
@luvtahandload7948 5 жыл бұрын
@@LongRangeShootersofUtah No sizing die will touch the shoulder of a Hornady Modified case. I just went and measured a modified case in a Redding Instant Indicator and it was .010" under SAAMI minimum chamber specs. The Modified cases are far smaller than even factory ammo.
@luvtahandload7948
@luvtahandload7948 5 жыл бұрын
@@jamiem5364 What size drill and tap did you buy? I was told the thread pitch was Hornady's own proprietary design.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Who are the two morons that gave this a thumbs down? Who does that honestly!
@JOHNJCLARK
@JOHNJCLARK 5 жыл бұрын
Ppl who are wise I want to learn all I can.
@duckslayer11000
@duckslayer11000 5 жыл бұрын
Haters gonna hate lol. The rest of us appreciate Mr. Tubb and yourself.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
I can't believe some of the negative comments. It's always the folks that have done nothing to try and help or share or educate that are the first to try and tear down someone who puts themself out there and puts in the effort to bring this kind of content to others. So dumb.
@JOHNJCLARK
@JOHNJCLARK 5 жыл бұрын
@@LongRangeShootersofUtah I would like to watch him shoot
@wvlongshooter3912
@wvlongshooter3912 5 жыл бұрын
It's jealousy, that's all you can say. These kind of people, if they are shooter's, won't go far in this sport because they can't take instruction. They can't put their man hood card away long enough to listen and learn. That's why they are haters!!!!!! Jealousy, Jealousy, Jealousy, Jealousy!!!!!!!
@MCheekeOutdoors
@MCheekeOutdoors 4 жыл бұрын
When you jam .010" in the lands, where should one start for charge reduction from max load ? Thanks
@planeiron241
@planeiron241 4 жыл бұрын
1 grain test fire then go from there..make sure bolt lift is ok then your off to the races...by the way if your running max make sure you have a action that is worthy of the pounding...bolt faces get pinged from pressure..causing the case head to swell and in turn will cause issues at the press
@243Outdoors
@243Outdoors 5 жыл бұрын
Mind Blown, My hair looks like yours.
@duckslayer11000
@duckslayer11000 5 жыл бұрын
Don't you love it when someone at the top level of a discipline reveals how simple they keep some aspects of their setup.
@tcstory5456
@tcstory5456 5 жыл бұрын
I do the same .5 load development as him just never thought .2 .3 every round made sense to me tell after u found out were ur node was I guess it's just people following the leader and not actually thinking about how to speed things up in a more efficient way or idk but I do the same .5 then fine tune the node then the same about the ladder iv never done a ladder test before at 500 yards but I've always thought about environmental u always here about Scott satterlee doing the 500 but I've never seen or head or witness someone else doing the same just that a ladder at 500 worked but good interview David tub is pretty bad ass and knows what hes talking about through years of experience bad ass interview
@shadow6pt533
@shadow6pt533 5 жыл бұрын
I'm new to reloading and would like some clarification please. 1. Why did he do plus and minus ten thousand when going in .5 increments when finding Max pressure? Seems like some wasted ammo. 2. Why did he say to test 40.2 and 40.4 (areas that hit high)when 39 to 39.5 was the flat node spot? Thanks everyone!
@Sydneywizard
@Sydneywizard 5 жыл бұрын
I was wondering about your second point too.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
I think you're getting the load testing mixed in with seating depth testing. He's stating that unlike most folks I know that will do seating depth & load tests separate that he does them side by side. He'll load sets of three for each load, for example three at 39 gr then three at 39.5, then 40, then 40.5 and so on that are all 10 thou off the lands. Then he loads the same thing again that are 10 thou jammed into the lands. Once he sees a node from that test he'll go back and fine tune by testing in .2 gr increments and so on. Does that make more sense? Thanks for asking a legitimate question and not just leaving a nasty comment. I'm far from perfect at this but I go out there and do my best to bring you good content in the hope that you can learn something from some of these amazing people that you might not otherwise meet.
@Sydneywizard
@Sydneywizard 5 жыл бұрын
@@LongRangeShootersofUtah Ignore the trolls and know-it-alls. We live in a society of armchair geniuses and that's sad and annoying. Keep up the great work.
@shadow6pt533
@shadow6pt533 5 жыл бұрын
@@LongRangeShootersofUtah Thanks for the response. It makes sense. Try not to let the silly haters bring you down. I appreciate your content and help!
@jamiem5364
@jamiem5364 5 жыл бұрын
@@Sydneywizard totally agree mate, great vids just ignore the dipshits!
@ditzylemmon5094
@ditzylemmon5094 5 жыл бұрын
Some great info here
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Thank you.
@silverback7659
@silverback7659 5 жыл бұрын
Would also like to know how to properly record down load data and what to record,ect. Also just some tips on organization would be great.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Great question!
@outlander330cc
@outlander330cc 5 жыл бұрын
I had always heard that it was dangerous to have the bullet touching the rifling when loaded, because the static friction of the bullet in the bore would cause a pressure spike before getting the bullet started moving. Apparently this is not the case?
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
You can expect higher pressure when jamming the bullet but anytime you reload you should always start low and work up until you see pressure thus preventing any problems.
@Ron-ni8uu
@Ron-ni8uu Ай бұрын
​@@LongRangeShootersofUtah😂yes jamming always creates a higher pressure spike have fun love you
@sniperjoe
@sniperjoe 4 жыл бұрын
Man the utah guy really did a huge disservice to this video.... how about next time you let him finish a sentence
@audiogod2929
@audiogod2929 4 жыл бұрын
David Tubb's kiss methoth is the bomb ! Love this guy
@roytallericoGunner
@roytallericoGunner 2 жыл бұрын
David Tubb is a legend..why did they match him with this guy? This would be good without him interrupting every 5 seconds.
@joshthompson5870
@joshthompson5870 3 жыл бұрын
I'm impressed the guy on the right didn't get slapped off his chair. I made it 5 minutes into the clip and thought he needed to be. Might know his stuff, but the guy on the left has probably forgotten more than what the guy on the right has learned
@tobiastorsi
@tobiastorsi 5 жыл бұрын
A little off topic. Which primers are the most consistent and accurate? I am loading .308 and am trying to get the most out of every component. Thanks!
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Your best bet is to by match primers like the Federal Match or CCI BR (Benchrest) but the standard one typically works well also. Most precision rifle shooters gravitate towards the Federal Match or CCI primer (standard or BR). Don't be afraid to test different primers to see what shoots best. Also, try to buy your primers is large quantities of the same lot, in fact, that's how I keep track of the number of rounds I have shot thru a barrel. When I buy the rifle or build it I will buy enough primers of the same lot to outlast the barrel and I keep them in a box with all the components to reload for that rifle that way I can always count how many primers I have left and get an idea on the round count for the rifle.
@tobiastorsi
@tobiastorsi 5 жыл бұрын
Long Range Shooters of Utah great Idea to count the round by the primers. Will definetly try that. I can get CCI BR2 or Federal 210 Gold Medal. Which would you rather choose? Thanks again!
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
@@tobiastorsi Both will be fine, one may shoot a bit better but you'd have to test them.
@jalenladue5133
@jalenladue5133 4 жыл бұрын
How accurate can a ladder test be for a 243 at 200 yards? With it being such a flat shooting cartridge ive always figured further the better. Easier to read also at those distances.
@randylong8156
@randylong8156 2 жыл бұрын
I can't even watch this I'd love to hear him speak God dang it!!
@Deuceblank
@Deuceblank 5 жыл бұрын
MIND BLOWN!!!! How many here have their eyes bugging out of their head lol
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
I'm tempted to take it down after all the negative comments I'm getting here and on social media about it.
@TomH1947
@TomH1947 5 жыл бұрын
@@LongRangeShootersofUtah DON"T allow uneducated trolls to eliminate this valuable info. Lots of ppl want to berate David. Yes, he sell his products. Should one not provide for his family? Your interjections were fine w/ me. Everyone needs to look at something in the reference of "what can I take away?" If nothing move on. That's a simple, mature outlook that will serve well for most normal ppl. Trolls have other needs. Putting ppl down is their loss. Pitiful. Hurummp!
@spider-man2291
@spider-man2291 5 жыл бұрын
@@LongRangeShootersofUtah I hope you don't. People don't realize how difficult it is to guide a discussion under such circumstances and to account for all learning levels. You did really well considering, and will no doubt improve over time. If people let that get in the way of knowledge, then they aren't worth the time. Better off reading, but then why come here? People need perspective. Thanks for providing such solid content, it's appreciated.
@DS-gd1xw
@DS-gd1xw Ай бұрын
Look on Bryce's face when David Tubb said, " I don't anneal?"
@taylorbokshowan5713
@taylorbokshowan5713 4 жыл бұрын
I’d like to see the non dummy version
@jonlennon3348
@jonlennon3348 8 ай бұрын
Bryce are you interviewing yourself or David whom we would like to listen too.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 8 ай бұрын
It’s easy to critique from the couch. If I could go back and do it differently I would. Have a nice day. You’re welcome for taking hours of my time to bring you this kind of content only to complain about it.
@ntaylor1829
@ntaylor1829 2 жыл бұрын
Berger Stability Calculator link is not correct, fyi Also, I need some H1000...anyone?
@CallMeUbba
@CallMeUbba 3 жыл бұрын
Thanks for making the video but next time consider saving the explanations for editing in after the interview
@ericb.4358
@ericb.4358 3 жыл бұрын
Hmmm... old ammo can have greater net tension variance and needs "refeshed" by seating10/1000 shorter. interesting.
@isaacmacfarlane8134
@isaacmacfarlane8134 5 жыл бұрын
Good content, but I would put you in your place if you interrupted me so much. Glad he was patient so we could still get the great info.
@withoutfurtheradoforever
@withoutfurtheradoforever 3 жыл бұрын
The Master.
@stefanschug5490
@stefanschug5490 4 жыл бұрын
David talks in this interview about his reloading method that works for him as his success story tells. As every barrel changes its lands., especially in the throat area over the time of use, jamming the projectile into the lands requires the continuous increase of OL with this method. It is much easier for the average reloader to find a good node off the lands and stick with it. My only critic is that you promote simple cup and core projectiles like the Sierras and Bergers, which are just better, improved match bullets, for big game hunting. Terminal performance of these projectiles is often horrible especially when combined with poor shot placement and fast magnum rounds. Only prime projectiles like the Nosler Partitions, A-frames, Barmes X, Hornady GMX or any good bonded bullet should be used to achieve ethical kills.
@taylorbokshowan5713
@taylorbokshowan5713 4 жыл бұрын
Don’t take crappy shots.
@josecanisales3491
@josecanisales3491 4 жыл бұрын
Let David talk, stop interrupting !!!!
@codychildress7859
@codychildress7859 Жыл бұрын
God let the man speak
@wayneacoker
@wayneacoker 3 жыл бұрын
Great information to bad David Tubb didnt get to talk.
@Guide504
@Guide504 3 жыл бұрын
'Fat and round and kinda forgiving' to someone else! Love it. DT doesn't like being asked to talk then being talked over, he is a raging ego and competitor in a bag of skin, brilliant but I'd give him due where it's due and maybe even a mountain dew!
@stuartmarkman769
@stuartmarkman769 4 жыл бұрын
I thought David Tubb was supposed to talk but he had a hard time with motor mouth interupting him.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 4 жыл бұрын
stuart markman the motor mouth brought you the opportunity to hear from Mr Tubb so...
@briangunner8355
@briangunner8355 5 жыл бұрын
GOOD GOD MAN ,,, SHUT UP , LET THE MAN TALK!
@CREGHermosa
@CREGHermosa 4 жыл бұрын
Completely agree
@Awesymoto
@Awesymoto 5 жыл бұрын
Stop interrupting Mr. T it makes it hard to listen to as well!
@mr.noneyabidness
@mr.noneyabidness 3 жыл бұрын
There are some interviews where the interviewer should just let the interviewee talk for the benefit of the video and everyone else watching.
@CallMeUbba
@CallMeUbba 3 жыл бұрын
I don’t get it. Why do you feel like you have to interrupt to explain to people what a kinetic puller is. If they’re going to learn load dev from David Tubb they already know. If they’ve read a reloading manual they should already know.
@DeereX748
@DeereX748 4 жыл бұрын
Great interview, would have been better if the interviewer hadn't interrupted so much. I think most reloaders are aware of the points he kept jumping in to make. I do have a question about Mr. Tubbs practice of weighing the empty cases prior to charging them. I assume it's to eliminate differences in case weight to determine actual charge weight, when using a progressive loading system. My question would be, is that step necessary if you measure and weigh each individual charge as you load?. I use a single stage press, and a digital scale that is accurate to 0.02 grains. I weigh each powder charge after I've set my powder thrower, which I set lower than my desired weight, and trickle each case to the desired weight within +/- 0.06 grains. This gives me a variation of no more than 0.12 grains between individual rounds. It takes longer, and I'm only this precision-oriented on my long-range rounds, but the chronograph and target pattern shows it works. This is for a 7.62.51 and a 6.5 Grendel.
@spider-man2291
@spider-man2291 5 жыл бұрын
What am I supposed to say when I miss now!? You cover everything! Read more
@TomH1947
@TomH1947 5 жыл бұрын
cute
@spider-man2291
@spider-man2291 5 жыл бұрын
@@TomH1947 Yes. I suppose so... other adjectives to apply could be funny, annoying, odd or misleading. I like cute though. Very refreshing.
@blakemilford9128
@blakemilford9128 2 жыл бұрын
Thought David was going to punch him for interrupting so many times.
@Deuceblank
@Deuceblank 5 жыл бұрын
How many annealers are we gona see for sale on craigslist LOL
@LongRangeShootersofUtah
@LongRangeShootersofUtah 5 жыл бұрын
Deuceblank lol. Well he didn’t say you shouldn’t anneal, he just said that if you’re jamming your bullets that you can get away without it. He anneals, it just depends on what he’s doing.,
@wvlongshooter3912
@wvlongshooter3912 5 жыл бұрын
Exactly !!!! Good time to buy one for cheap..
@TexasTrained
@TexasTrained 2 жыл бұрын
It would be nice to head DAVID talking and you not interrupting him so m,uch.
@timsnowdon8455
@timsnowdon8455 5 ай бұрын
Pinky and the brain
@michaelbaldini8554
@michaelbaldini8554 3 жыл бұрын
You had the pleasure to sit down with a shooting legend just as you stated in your opening sentence. Perhaps you should have just listened.
@LongRangeShootersofUtah
@LongRangeShootersofUtah 3 жыл бұрын
Just trying to dumb it down for ya, my apologizes for trying to give you a chance to learn from a legend.
@justsnuggle
@justsnuggle 2 жыл бұрын
Yeah I wonder what more he would have said if allowed to just talk and let the audience just Google the terms I didn't understand after the fact
Testing - Does Seating Depth Make a Difference?
17:35
Winning in the Wind
Рет қаралды 145 М.
Virtual Class   Reloading & Load Development with Al Barnhart
1:01:43
Applied Ballistics
Рет қаралды 35 М.
How Many Balloons To Make A Store Fly?
00:22
MrBeast
Рет қаралды 189 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 44 МЛН
路飞做的坏事被拆穿了 #路飞#海贼王
00:41
路飞与唐舞桐
Рет қаралды 25 МЛН
David Tubb Talks Barrel Break In, Cleaning, Life & ELR World Records 2018
43:34
Long Range Shooters of Utah
Рет қаралды 71 М.
Load development for Precision Rifle. (The Scott Satterlee method v2.0)
33:26
Long Range With The Lillys
Рет қаралды 91 М.
David Tubb discusses 6XC
5:42
Superior Shooting Systems Inc
Рет қаралды 23 М.
Powder Load Development - 284 Win  vs Vihtavuori N165
16:00
Winning in the Wind
Рет қаралды 32 М.
Best Load Development Method
29:44
Crusty Old Marine
Рет қаралды 28 М.
Stop Wasting Components Doing Seating Depth!
16:10
Winning in the Wind
Рет қаралды 191 М.
Ep. 099 - Let's Talk Mean Radius
41:44
Hornady Manufacturing
Рет қаралды 19 М.
Precision Rifle Load Development/ Part 1: New Brass Prep
16:26
Panhandle Precision
Рет қаралды 433 М.
Brass Prep for Precision Rifle Reloading with Scott Satterlee
40:09
Long Range With The Lillys
Рет қаралды 55 М.
OCW or Ladder Test Method? Why not BOTH!
18:44
Strickly Reloading
Рет қаралды 27 М.
How Many Balloons To Make A Store Fly?
00:22
MrBeast
Рет қаралды 189 МЛН