Day in the life of a Plumber 13 Dr Pipe, Trv, Noises & Working on Sunday

This video is about Day in the life of a Plumber 13 Dr Pipe, This week we visit a Hilti hammer drill Tap. Then off to central London Pimlico To fix a leak on a Heating system that cant be traced, Having found the leaks we sort them out, Its Sunday and earlier in the year when in central London they charge To get in to the capital. Thanks for watching...Oh and I take my lovely assistant Louise with me...Let me know what you think of her Skills !!

[@drpipe]

Noises , Sunday fools, Assistant, drop systems, Vaillant Purefit , signs and Leaks thanks for watching 👍😂

[@kristianhodges1]

Another great video Dr pipe and like my self I love my knipex grips especially working on polished surfaces where you don't wanna damage or scratch them...keep the videos coming.

[@drpipe]

Kris pleased 👍

[@yensabi]

Nice one doc , what can I say....this is bread and butter work for us guys , cheers......👍

[@carlton683]

Good job very well experienced guy great advice love your videos thanks again tony

[@drpipe]

Anthony Stanley just working on a Stanley Fat Max bag 👍 thanks for watching 🙏

[@angelinthedocks3732]

I like to put top hat washers on bath and basin taps where possible. I will also load the tap base where it meets the bath top with clear silicone to prevent water ingress. As the hawk white gets to the end of its life I sometimes add a drop of methylated spirits to it to loosen it up. I assume linseed oil would work just as well. Love the channel. You provide a great service to client and viewer alike.

[@marksavill367]

Another quality video bud. Hate street elbows into compression fittings. Nice to see someone else that doesn't use bloody Flexis up to taps. Can't beet copper and tap connection fittings. Keep the videos coming mate!

[@drpipe]

Mark Savill Appreciated 👍👍

[@pb9926]

Excellent viewing Doc ! Nothing more relaxing than watching someone else struggling when I've had a similar day 😀 love the brick top taps, fantastic !!!😁 I use the dickie dyer olive splitter, it works on 15, 22 & 28 👍 I gave up with the olive puller because most times some gorilla has tightened it so much it distorts the pipe and will never pull off 😬 the dreaded drain off washers !!! Now that's another story 👎 Take care mate and enjoy your weekend.

[@drpipe]

PB always a pleasure mate. Have a good one 👍👍

[@MRALLETT]

thanks for making the video

[@drpipe]

🙏👍

[@dynamostubby]

Another informative and easy to watch vid mate. Roll on Friday 😎

[@drpipe]

dynamostubby Appreciated 👍

[@loafersheffield]

Friday used t be regarded as "poets day" Piss off early, tomorrow's Saturday. God, I'm old and nostalgic fer the old days.

[@markhoward5780]

I used to put plastic top hat washers on bath taps as well they seemed to help the tightening process

[@robinwigley1996]

Just found you great vids been doing it 40 years and your probs are like mine

[@drpipe]

Robin Wigley Thanks pleased you like them. All our probs are the same I believe.. Access ... light... space ... price... customer 😂🤣😂

[@e45cream72]

Great video

[@drpipe]

E45 Cream 👍🙏

[@mikegallagher2107]

Great content as usual look forward to you vids on a friday dr pipe 👌👍

[@drpipe]

Mike Gallagher great stuff fella like making em 👍👍

[@paulmarco9825]

You are my inspiration 🤪 👍

[@simonmander4314]

They're lucky one of those bricks didn't slip and take out the bath tub! I've used PTFE for years with no issues. I'm trying switching to Loctite 55 simply cos I can apply it to the fitting much quicker. Seems ok as long as you wrap on a few more than the instructions say! Thanks for the vid great stuff.

[@drpipe]

Simon Mander Appreciated 👍👍

[@simonmander4314]

@@drpipe really enjoy them keep them coming!

[@pearcemachineshop5200]

Nice vid Mr Pipe, end result is what matters not how you get there, couldn’t agree more, for me though just PTFE works 14-18 wraps and no leaks, funny how we all do the same job but do it slightly different,😁 Alan.

[@drpipe]

Alan Pearce that’s so true 👍 I use 14... people say why 14.... I was born on the 14 😂 oh my gosh that’s loads to many ahh give over 👍 appreciated 🙏

[@loafersheffield]

Scratching the threads with a junior hacksaw blade, notching the threads creating shark teeth, means that the ptfe doesn't travel up when you wind them in. You can even back off a little, like when you are fitting an outside tap and the tape maintains it's water tight integrity.

[@Bazzyb19]

If only all bath panels and taps were that easy 😂

[@adeeldar4386]

Barry Gunter ahhha tell me about it

[@jdcisneros9023]

For real 😂

[@kurluk04]

I personally use plumbers mate on the taps good job boyoo!! And jointing compound to fill the thread inside the rad 👍

[@drpipe]

Pleased 👍👍

[@Littleginner1976]

Great work keep it coming 👍ptfe and paste always belt and braces

[@julianmcafee5976]

Great vid mate reading some of the other comments you could try one on the tools you have in your bag specialy all the questions on the kipex i use the 180 as they do 22mm as well

[@drpipe]

Julian Mcafee done a couple of vids on my tools mate take a look thru 👍.. pleased you enjoyed.. find the big ones a little particular size wise either to loose to open in the grip if u know what I mean 👍

[@harveysmith100]

Drain off washers, Drain off washers, Drain off washers. I think that is clear to the young guys. I know you are a big fan of changing them everytime. It's Sunday, no where is open, you have sweated all day banging your knuckles and finally the last nut is done up. You pack all your tools away in the van, go back to pick up the hose, pull it off the drain off valve and it is like being Shot! That tiny drip that you know isn't going away. It's fine, you kid yourself, a little tweak and it will stop, so, like a fool, you tweak it and the drip gets worse. You can add the rest, another drain down, trying to make a washer etc

[@drpipe]

💯 buddy think I make it clear..😃😂🤣🙏 I’m trying to get a sample of the @nexgen product 👀👀

[@harveysmith100]

@@drpipe we have all been there

[@benfrost8697]

Those towels look like they smell like mine mate! Nice on a warm day! 👍

[@650GSF]

I bought a Fernox system filter 6 months ago, I am confident I can fit it to the pipe, but got a horrible feeling when I drain the boiler and then refill it, I am going to end up with an air lock in the boiler, so have been putting off doing it ha ha, I guess I should at least put the inhibitor in so that is doing some good :)

[@drpipe]

Garry G put a pump primer on for a bit with no heat 👍👍

[@sharvii]

Dear Dr Pipe - what a pleasure to watch and listen to your channel. You are a credit to your profession, it’s so to nice to see the attention to detail and just doing things right. Do it nice or do it twice right 👍😀 ps how many wraps do you do on the trv’s?

[@drpipe]

Richard Sharvin 14.. it’s my birthday 😀 Thanks for watching .. if you haven’t already..Hit that subscribe button 👍

[@sharvii]

Dr Pipe I am a subscriber. Many happy returns, be safe 👍🥂

[@CEO786]

Think you should call yourself DR-ip - really enjoy your videos really insightful and real without any play acting for the camera.

[@TheJackRayner]

Absolutely binging these day in the life videos over the past few days! Are you ex forces Doc? The polished boots and ever-present gerber have my spidey senses tingling.

[@drpipe]

Pleased your getting something out of these 👍👍

[@richardordonez8331]

I had a Delta Monitor tub/shower valve in a tiled wall chatter like that tap only when in shower mode. Everything was tight.Never seen anything like it.

[@drpipe]

Thanks for watching .. now Hit that subscribe button 👍

[@carlwhitworth]

Love watching your videos, learn a lot from them (I'm a handyman). Can you tell me where you got the plumber's repair kit from and what it was called. The one with fibre + rubber washers and other assorted bits. Thanks 👍🏻

[@bluebeastgamer3005]

Nice work and very good informative videos!!!!! By the way, where do you get your 1/2 inch ferrule ring removal tool????? I always want to have a ferrule ring removal tool. Thank you, Barry

[@drpipe]

BlueBeast Gamer monument 👍👍

[@grahamhusk183]

LOL, im not going to be changing that one... cause its got grief attached it! Day in the Life indeed Dr Pipe ;)

[@discobiscuits5564]

I can’t stand street elbows into compression if your using the longer streets fair enough but the short ones will eventually weep

[@drpipe]

DiscoBiscuits I’m with u on that 👍

[@paulsparks5682]

Love your work mate ..but why don't you use adjustable handle on rad tails and nuts instead of grips ...no scratching the chrome

[@drpipe]

Paul Sparks parralel grips don’t scratch 👍👍 lazy Sunday didn’t want to go back out to van

[@loafersheffield]

Leave 'em the bricks, but put the old taps in your scrap box. ;-)

[@drpipe]

loafer sheffield 👍

[@MJ-ce6tv]

I’m a fan of using compound over PTFE (especially on new joints). I’ve always used the potable stuff (blue tin) which will do for all applications. The yellow tin your using looks like different a consistency. Is this better than the blue tinned stuff, when working on non potable installations?

[@drpipe]

M J it’s more putty linseed so dries semi firm 👍👍

[@MJ-ce6tv]

Dr Pipe Thanks. Off to Screwfix I go! Another great video by the way.

[@alansmith9412]

love the videos.couple of things I do is use Loctite 55 on tails which is so much better and rather than used adjustable for drain off get ac ratchet spanner as used by pb plumber on youtube si much easier

[@drpipe]

ALAN SMITH ac ?

[@alansmith9412]

yes its used as an aircon tool mainly I think its master cool 70082 at airconsparescom

[@drpipe]

ALAN SMITH 👍

[@megaman1806]

I got one of those Mastercool ones on amazon and my bloody last apprentice lost it, just ordered another last weekend. I'm not gonna lie it's really handy especially on pump valves, drain offs etc. Loctite 55 is very good on tails BUT you know what else is good and faster? Loctite 577. Didn't trust the stuff before but my goodness is that handy especially for those joints you can't wrap PTFE around or get your grips and spanner on. Trust me, start using that stuff you won't look back. I put in all the threaded connections on an indirect hot water cylinder in under 2 mins.

[@drpipe]

Mega Man pump valves I use a Guitar adjuster works ok... it’s got to the point guys where we have TOO many tools we can’t remember which one of the special tools we should could or would use 😂🤣😂 👍👍

[@abrael333]

APPARENTLY ... the jointing compound deteriorates the P.T.F.E tape, according to some. I myself, have not been privy to such a result... lol

[@rayc1503]

Na in Aus and USA they use both a bit of an overkill. I guess it helps the thread glide easier. Plenty of pipe compounds have added p.t.f.e.

[@blackdog5560]

As a plumber from Victoria, I can confirm you are correct, it is completely typical for us to apply a sealant paste OVER THE TOP of p.t.f.e on male threads on pipes & fittings, and equally normal to bolster any olive based joint with a little paste also..... overkill it may be, but probably cheaper than a call back at an inconvenient moment that has that knock on effect of you looking silly to a client..👍🏾

[@rayc1503]

@@blackdog5560 I've been a plumbing & heating engineer 10+ years now. I use either p.t.f.e or jetlube V2. I've never had a callback for a leak on any of my own work. P.t.f.e and pipe dope used together isn't a major issue just a waste of time imho. Each to their own I guess. 😊

[@drpipe]

Black Dog mate I don’t know what to say💯👍 I made this idea up 25 years ago and previously was getting the odd leak... since using this NEVER had a call back or issue.. people used to take the piss out of me for it 👍😂😂 clearly you got your shit together in Victoria 👍 made my evening thank you 🙏

[@jmqmin]

Can you recommend a complete washer pack set please. I like the one you have, is that one kit or did you collect allsorts as you need? Please let me know thanks

[@drpipe]

jmqmin it’s built up. Go to tool station buy every washer in the book your gonna need 1/2 2/3 etc drain bingo all done 👍👍

[@harveysmith100]

I think Screwfix still do kits, fibre washer kit, fibre and rubber washer kit, ball valve kit. buy all the kits and you can add to them as you see fit. I carry 3 or 4 of the assorted boxes. Life savers.

[@joneth781]

What jointing compound do you use?

[@drpipe]

KING DONG been using V2 as it has a brush 👍 used to be on bosswhite but not great on Potable 🤮

[@josephmclaren2789]

great vid- yep a typical day but sort your bleedin volume levels out will ya- :-)

[@drpipe]

Joseph McLaren pleased you like.. I’m a plumber not a Sound Engineer 🤣😂 long time ago that video 🙏👍👍

[@daviddaywalker3844]

Tap change. I like to use top hat washers. Depending on how long the tails are ....I'm glad I'm not in the game now .I gring at the cylinder change .night mare

[@pault3705]

Also is putting compound behind the olive better than in front ???

[@SuperWayneyb]

👍🤓👍🍰

[@SalimKhan-gk1fh]

Hi dr pipe What do you think of the Vaillant eco-fit pure ? I’ve heard it’s some sort of budget model a friend of mine fitted a few and won’t use them anymore apparently it has an aluminium heat exchanger like the ideal boiler has

[@drpipe]

It is Ali.. why won’t he fit them no more

[@SalimKhan-gk1fh]

@@drpipe I think he had a few problems ,I’m not sure what I will find out , also Did you know the pure25KW model is only about 18 KW on the heating side ??! which caused him an issue !vaillant engineer wasn’t too helpful as you know in one of your videos they come up with all sorts of excuses as to why they can’t work on your boiler it’s too high it’s too low it’s in the attic it’s 50° up there health and safety blah blah blah, I was a diehard vaillant boiler fan but gave up after all the years of blocked heat exchangers gas valves PCBs etc,I’m showing my age here , I used to love the turbomax! Switched over to Viessmann boilers and I’m quite happy so far what’s your verdict on them?

[@drpipe]

What’s he working on Buckpalace 😂🤣

[@ashleyhutt9618]

Hello, Thank you for another great video! I’m new to your channel I found you because of the freezer video you did I bought a eco freezer off of a so called Freind for £350 it’s not working I’ve checked the water reservoir and the power cable. I’m really sorry to bug you about it as it’s not your problem but I know you said you made some improvements to your and just wanted to know what you did? Kind regards Ash

[@drpipe]

Ashley Hutt watcher the Freeze off vid it’s in there 👍 I soldered wires direct to the board that’s pretty much it.. if the pumps running and kicks in when u go to freeze ur almost there 👍

[@ashleyhutt9618]

Dr Pipe Thank you. I’m thinking a bout testing for continuity between components. The pump runs if I take it out and supply power. Funny my friend no longer wants to talk. So you removed the spade connector? They do seem loose. Do you still make your adapter for the Vaillant?

[@drpipe]

Ashley Hutt yes there’s a block of pins soldered direct onto pins but would suggest turn it on pier up push to freeze and jiggle terminals carefully to see if it’s loose or shorted out etc normally looks burnt if loose 👍👍

[@drpipe]

Ashley Hutt yes still have the widget email at the about page email address £23.95 inc pp

[@ashleyhutt9618]

Dr Pipe Admittedly inside look clean too clean so I’m thinking I’m not the first person to take it apart. I’m hoping that a service might shed some more light. Might need to do a KZbin video on 😂. Thank you for your help. Will email you the order tomorrow thank you again

[@paulhughes2367]

Nope tape and paste was the way i was taught 30 odd years ago as well

[@drpipe]

Paul Hughes if it works then I’m down with that 👍👍

[@daviddaywalker3844]

I use hemp and boss white on heating not domestic services .each to there own like the video .

[@drpipe]

David from ENGLAND Proper Old Skool mate 👍 pleased you enjoyed it 💯 would love to see an apprentice these days use that... prob try to smoke it mate 😂 thanks for watching

[@tedkeeble1087]

Got the old tennis elbow then pal? I’m in the same game as you and when it comes on the strap is the only thing that helps. Also no top hats on the tap job?

[@drpipe]

Ted Keeble it’s lethal for me now one wrong move I can be suffering as I’m sure you know the feeling... swear it’s the grip and twist of that pipeslice 🤔🤮 got an electric one now... just 4get I have it now 👍😂😂

[@Sam.147]

Great content mate. I'm not a fan of paste over P.T.F.E but each to their own. What is that monitor on your wrist about? Do you purge the air out of the boiler once you've filled up and bled the heating system? Just curious 👍

[@robertwhite4919]

put the pipe dope on first then the tape, its a bit cleaner. That's what i was shown a few years ago.

[@jdcisneros9023]

Strange to me that you think it’s cleaner when your fingers get covered trying to wrap around dope when you can tape it dope thread it then wipe it , seems a lot less messy

[@waheedjalali1618]

Flue next to the vent wow

[@davehunter6920]

hi Dr... do you ever use Laco in place of boss white?

[@drpipe]

dave hunter I use Jet v2 lube stuff a lot

[@davehunter6920]

love je t blue but am thinking Laco may be better

[@drpipe]

dave hunter try it see what u think 👍

[@metallitech]

Lol radiators are such a hassle.

[@drpipe]

🤣

[@arfanjhangir8465]

hi great vid. any links to bath mixer taps?

[@drpipe]

arfan jhangir I didn’t buy it client did prob of Amazon 🤮

[@jamess5185]

another great vid , and yup its funny how we all have a slight diffrent routine to ptfe tape , jointing compound etc i never seem to have any bad recalls without using the stuff my days serving my time my guy always said just let the olive do its job , also the guy asking about aprrentices this country is so dumb as a guy working on his own its just not worth all the hassle these days taking anyone on which is so unfortunate as your knowledge is like gold dust in the industry

[@drpipe]

James S clearly you understand the score and the Hassle factor of it all 👍. I’m pleased that you took the time to look at some of the comments supper informative for us all inc myself learn so much from this channel.. super pleased I persevered with it 🙏thanks for watching

[@heatpump8566]

Have you got a link for the grips please....great vid

[@drpipe]

Paul Turner I don’t .. Ebay small knipex parallel grips maybe 150 minor less

[@drpipe]

Mm

[@11982463]

What is the compound that you are using aroond 11:30 please. Is it jet blue? Thanks

[@drpipe]

RICKY L if not will be boss white

[@dansmith436]

great vid mate, whats that on your right arm ?

[@drpipe]

rs plumber tennis elbow from pipes lice etc some days can’t hold my drink 😂

[@davehunter6920]

d"ya ever use jet blue?

[@drpipe]

dave hunter yep all the time now love the brush saves me finger 🙏

[@Taylor_26GE93]

Got a question for you Dr Pipe! Sometimes when im fitting a new BSP Tail for the radiator, i apply the PTFE as your weekend assistant did, i then screw it into the rad a substantial way in. But when i tighten the rad valve itself sometimes i undoes the 1/2"bsp tail. If it moves a little way, will it be ok or will the ptfe not seal if its been undone even the slightest amount? Or is it that under no circumstances can you let the tail undo any amount from the rad? Or is that that i am overtightening the compression fitting on the tail, causing either the rad valve to rotate (gotta be vertical haha :) ) or loosens the tail

[@drpipe]

Taylor D the way I do it you may be able to go anti clock abt 1/4” but any more either go round another turn or remove re tape go again.. sounds like either Not enough tape turns for me 12 turns 1/2 in 👍

[@Taylor_26GE93]

@@drpipe I do about 12-15 turns, but i dont go over it to make sure its compressed down, maybe thats why? Got a rad to move this weekend, so ill give it a go n try n work out what im doing wrong. Thanks for your wisdom! Keep up the great work! I do enjoy watching your content!

[@drpipe]

Taylor D yes have to compress or it will roll off 👍🤔

[@pault3705]

How many wraps of ptfe do you recommend on the rad tails before adding the boss white.. thanks in advance

[@skerries43]

Was that the Drayton tv4 rad valves that were leaking. I was at 2 last week and they were leaking from the centre when you remove the trv. There is a gland seal replacement kit you can get for the drayton trvs

[@adeeldar4386]

what company are them glip pliers from

[@drpipe]

Knipex

[@dave8930]

Dr pipe, I’m replacing old rad valves in my house with TRV’s. I was just going to leave the old olive and nut on the pipe and connect new TRV to that, wrap some ptfe around old olive. Is it essential to remove old olive and nut or is my way acceptable. Is it worth the money to buy a olive cutter or pullers to change old olives and nuts on 7 rads. Pros cons? Thanks

[@drpipe]

Ringo Kk only if you know what your doing 🤷‍♂️👍🙏

[@AaronM4275]

What's the gadget on your wrist? I'm thinking either blood pressure monitor or gas monitor? Just curious 😂😂

[@drpipe]

Marsbar 23 it’s connected to Uber to let me know where my next meal is coming from and when 😂👍

[@AaronM4275]

@@drpipe nice one 😂😂😂😂

[@drpipe]

Marsbar 23 go pro remote.. some days it works others I wish it were in the canal 👍

[@AaronM4275]

@@drpipe ah yeah makes sense 👍 loving the vids full of info keep them coming 👍🛠

[@megaman1806]

Ok. Can we just look properly and see that he is NOT using a GRIPS on brass or chrome nuts. It's more an adjustable hybrid lol. Shape like grips but more of an adjustable spanner.

[@chris-pp2ch]

Plastic bath splinters are the very worst !

[@drpipe]

chris 2 nasty 👍

[@Steve-jh6oz]

Why don’t you use an adjustable instead of those grips love your videos seem like a top bloke but it takes you ages to wind the tails in an do the nuts an olives up

[@drpipe]

Paul Nw thanks mate 👍 that’s what I took in and sometimes just the back and forth from the van mate.. you know what I mean one day I will get super organised 👍👍

[@vladoercegovac3419]

Great video mate,it's never late to learn new things.But I got ask,when do you get rest?You work even Sunday's

[@drpipe]

I try to work 5 days only.. but sat Sunday are Emergencies only. I’m on Call 24/7 👍🎉🤔

[@paulsparks5682]

Adjustable spanner I meant to write ....I am like you always use jointing compound with PTFE

[@tyronesylvester8522]

in the Game 25years... Why don't you have an apprentice?

[@drpipe]

tyrone Sylvester longer than that mate 😂 52 this year on and of since 17/18 ... arrrgh where to start...ummm I love the company 👍 just find young guys constantly want to tell me how better to do something which is fine but you must back it up with facts... generally it’s an idea not tried and tested. Also I’m very loyal and would feel very let done when they decided to leave... which let’s face it... it’s gonna happen. I never did that I learnt the hard way or the way that suited me thru hard work logic and ways I felt could would and should work ... cars bikes construction and life... and the odd tip. I’m completely self taught in all aspects of my life.. can I call KZbin my apprentice each one of you guys contribute to this channel 💯🙏 and with that every week I learn about you guys and what you may pick up on and what I’m doing right or WRONG and that’s a given I’m human like all that watch and listen. It’s soo Fucking Valuable to me on many levels can’t tell you . This business is tuff self employed and all the ups downs of it all. I have suffered in this business for a long time but now feel very happy and content. And I owe all of my viewers a massive thank you for that 🙏. You have the opportunity to learn from all of my Mistakes how amazing would you not say ? Best of all it’s Free 🤔😂.. I have an Idea.... send me an email please it’s at the back under community ok dude 👍 [e-mail]

[@dynamostubby]

Dr Pipe how about a mature apprentice????????? I would love to work with you. To learn everything I can from your day to day jobs.

[@drpipe]

dynamostubby I have some ideas on this ... keep watching 👍

[@dynamostubby]

Dr Pipe where about a are you based?

[@drpipe]

dynamostubby London

[@milkyporridge5929]

Hawk white is awful stuff. Stinks as well. I love me a good boss universal 👍

[@eyeswideopen2536]

Call a priest quick. That sink needs an exhorsist

[@davooditaheriukTaghi]

WHY YOU ALWAYS SOUNDS LIKE SOMEONES IN BURGLARY IN BUCKINGHAM PALACE

[@drpipe]

davooditaheriuk Taghi1979 🤦‍♂️😂 Easy Normally I’m recording this stuff with the customer within 8 ft of me either I don’t record it or with no sound or I just talk quietly doin my best mate 😂👍

[@flange06joj]

@@drpipe I find I mutter under my breath like you do in these vids when Im walking round customers houses haha

[@shanescott2630]

What grips you are using mate? They're damn good!

[@drpipe]

Shane Scott knipex

[@yvonfem]

One Chinese tap off and another one on

[@maxnavsa4470]

Why do whisper for....speak up bro.

[@drpipe]

max navsa I’m a quite kinda guy don’t like to make a fuss ... let my work do the talking 👍👍 thanks for watching. I’m not used to company if you know what I mean 👍👍

[@fh2832]

I usually like you vids but watching you with grips in a brass nut made me cringe

[@drpipe]

F H simmer down dude there parallel grips look them up they have NO teeth and don’t mark the brass.. good heh we use on chrome with no marks thanks for watching

[@fh2832]

My bad I didn’t realize. Keep up the vids mate good content.

[@TheDickPuller]

FFS Doc, you didn’t take that lovely lady out on a ‘Work Date’, you miserable Bar Steward!!! I hope you took her for a nice Lunch after you finished???!!! And you’re giving relationship advice......go figure????! I’m with you on the Boss White, I’ve used it on Olives & threads for over 40years mate, never had an issue👍👍 Thanks Doc, great video as always matey👍👍

[@drpipe]

Fibre Washer I’m a doctor on a Counselling trip 😂🤣 she’s a clever girl... clearly having me as a boyfriend 😂 but seriously always treat her👍 only thing is when I take her to jobs she wants to hoover and clean .. love her to bits 👍👍 hope your well fella all the best have a good weekend 👍

[@TheDickPuller]

Dr Pipe that good, tell her if you’re not always kind to her she can come & live with me in my Castle(Puller Towers) in the Highlands of Jockoland. There’s always plenty Whisky & Buckfast, and it’s never cold when you share your Bedroom with 4 Highland Cows. You have a great weekend Doc👍 You been buying more Knipex again, dear oh dear - you’re making too much money fella!!

[@drpipe]

Fibre Washer 😂🤣😂👍 knipex .. had for a while now.. bought the small set.. really like £28.00 then prior I bought larger set not so keen too fiddly unless you get them bang on size.. my eyes 🤣🤔 great on chrome. Money no backing off work mate for a bit getting tired of the up and down but love making these vids you always bring a smile so that’s great 👍👍

[@TheDickPuller]

Dr Pipe ah yes, the Plumbing & Heating business is a hard master. To quote my Boss from 40 years ago; “this game is famine or feast”. It’ll never change, however, I’ve never met a Plumber that’s not ‘flush’!!! I’m a bit of a Knipex whore myself you know👍👍😄😄 You & your lovely lady should do more traveling, you’re not getting any younger old fella & it’s an amazing world out there. Me & my good lady wife Olive Puller, are going to travel more in the next few years, if I can get her off the Gin & into the Priory. She enjoys a drink to the tune of three bottles a day, but hey it makes life interesting👍

[@BUMBACLARKE1ST]

Great vid mate...love your hand movements! Where did you get the washer kit or did you make it up?

[@drpipe]

Made it up

[@paradisefitness7585]

Why didn't you change the pipes There is green stuff on it can't that caused a little pinch