Daystate Delta Wolf Chronograph Cleaning - Airgun Bootcamp

[@josephbeckett8936]

Thank so much. I have been waiting for a detailed video on how to clean the DW.

[@colinstubbs8734]

Thank you for showing how to do the chronograph cleaning, I personally will be sending my gun back to day state every 2 years for a service and a firmware update, but it is handy to know how to do it 👍👍👍

[@LowkeyAirgunner]

I sadly dont have one to keep clean but it was interesting to see the design!

[@rudymsmith]

do you need to leave some space between barrel seating against the breech? to avoid temperature related POI changes?

[@TheDollarSportsman]

Excellent info; thank you for posting!

[@randycombs112]

Can't you just leave the barrel on and use a pull thru to clean barrel?

[@lorenzorommelaere9132]

Best. I have a delta wolf. Yesterday I bought a barrel kit .22. After installation I noticed that the crono did not work, the red light on the crono did light up. Now I also saw that I can no longer change the voltage, it always remains at 88 volts. one thing might have something to do with the other. Then I changed the barrel of the crono and the crono worked, but I could no longer control the settings. What could I test to see what is broken? Thanks in advance and congratulations on the educational you tube channel.

[@jimstewart5008]

Great information, you would be better off to leave the O-rings on closest to the barrels end and take the O-ring off further down so you wouldn't be catching in the O-ring grooves but I am sure it's easier to point it out than to do it in a video. Thanks again very useful information

[@terrywells3955]

Great information

[@Donny_Juanny]

What size is the breech o-ring for a .22 Alpha/Delta wolf? Also, would it be better to remove the Chronograph to clean the barrel?

[@sasaiuri2014]

hello, what do you recommend in terms of accuracy and strength between .. air arms s410 carbine or condor 24 both 5.5 thank you anyicipat

[@waqasafridi1629]

Please make a video 📷.How to remove pellets more than 4 or 5 stuck in barrel

[@robg4rob]

The BEST idea is NOT to use a metal tool to lever out the chrono PCB... shorting out the LED legs and connections on the PCB was evident when the Red LED flashed and extinguished. Very Lucky you didn't blow the whole circuitry in the back box. Or Better still TURN THE GUN OFF BEFORE MESSING WITH THE CHRONO !!! Basic Childhood mistake I would have expected AoA not TO MAKE AND ESPECIALLY PUBLISISE IT ON here.

[@ikke238]

Ik heb het ook gezien, de rode led ging feller dan lichter en uiteindelijk uit. Altijd de spanning af leggen en plastic gereedschap gebruiken

[@Juniantobaka1]

Mantap 👍👍👍

[@DedekFaisal]

👍👍👍

[@chrisfigueroa3361]

Awesome air gun to much for me and I see a bunch plastic parts that I don't like for a gun thst cost that much 😕the set screw in the back reminds me of an fx just imo thanks for sharing bsafe buddy 👍

[@tedbaxter5234]

Hard for a chronograph to see through metal windows - plastic is the reasonable solution.

[@gutiguti3914]

👍👍👏👏🇦🇷

[@bigearl8687]

This gun is probably like the impact, plenty of problems....

[@Donny_Juanny]

FX haters are REAL. Lol.