Daystate huntsman power adjust

  Рет қаралды 11,580

Daystate

Daystate

Күн бұрын

Пікірлер: 28
@ScottishWoodsman
@ScottishWoodsman 3 күн бұрын
After watching this I’ve had a look at my rifle. The hole in front of the trigger guard has what looks like some black plastic inside the hole, which prevents you even seeing the lock nut that you mention can be loosened then held to allow the Allen key inserted from the rear to turn.
@simonhumphreys6746
@simonhumphreys6746 11 ай бұрын
Very clear video thank you. However in my case the AT pin is stuck, there may be a tad of corrosion. Its impossible to get any tool or purchase on it to remove it. Any ideas please?
@johnastreet
@johnastreet 11 ай бұрын
Same problem here and the gun is only putting out 7ftlbs so I need to get it sorted.
@Rejoin_2023
@Rejoin_2023 9 ай бұрын
Same with my Classic, the pin doesn't just drop out
@DaystateLtd
@DaystateLtd 2 ай бұрын
Thanks for your comment - for all technical enquires please visit our technical support page on our website.
@imusryde1243
@imusryde1243 Жыл бұрын
Very Thorough and excellent vids. These are very much appreciated!
@DaystateLtd
@DaystateLtd Жыл бұрын
Much appreciated!
@piterex7
@piterex7 Ай бұрын
To increase the power on Harrier x I had to turn anti clockwise ,and when I try to clockwise the power wend way too low .so not sure if the harrier x model we’re build slightly different.
@DaystateLtd
@DaystateLtd Ай бұрын
Thanks for your comment, for all technical support please visit our website.
@gooderspitman8052
@gooderspitman8052 5 ай бұрын
Hi Jeff, cheers for the tutorial.
@garymurphy5133
@garymurphy5133 Жыл бұрын
I watch this guys own channel. they are great vids,very easy to understand and shot in great quality. I was looking at vids on the Revere before i travel miles to hold one and possibly buy. it looks to me know that the revere as a lot of plastic after seeing this vid? trigger guard looks plastic for sure, but more worring the top of action looks plastic ot a plastic cover and the safety catch and surrounding area looks plastic
@DaystateLtd
@DaystateLtd Жыл бұрын
nothing wrong with plastic, it a light strong and rustproof. Just needs to be the right grade and quality.
@dac41
@dac41 16 күн бұрын
How do you adjust the daystate renegade as mine is only doing 9ftlbs
@DaystateLtd
@DaystateLtd 15 күн бұрын
Thanks for your comment, for all technical support please visit our website.
@dac41
@dac41 15 күн бұрын
​@@DaystateLtd I've been on your site nothing about the renegade
@DaystateLtd
@DaystateLtd 14 күн бұрын
@@dac41 The Renegade manual can be found on our website: daystate.com/handbooksguides/ Alternatively there is contact information on the website should you require further assistance.
@kallemlink
@kallemlink 4 ай бұрын
Hi I watch your main channel with me owning a dreamline as well As revere huntsman great videos just quick question if you don’t mind, when I take me safety bolt out to play with the hammer my anti tamper pin want come out any reason why and any advice on take in it out thanks hope you can help
@DaystateLtd
@DaystateLtd 2 ай бұрын
Thanks for your comment - for all technical enquires please visit our technical support page on our website.
@RickWalkerSaunders
@RickWalkerSaunders 3 ай бұрын
i am really torn between the Revere .22 vs.177, can't decide which to purchase, In your own opinion, which is more accurate? And also i would only single feed because i had so many double feeds with magazine use because if i don't focus I easily forget it was already chambered, not like in a regular centerfire bolt action that the round will eject if you forget so no double feed issues.Is the .22 easier to single feed compared to the .177? And lastly with same suppressor is the •177 more quiet? Would appreciate your response, thank you.
@DaystateLtd
@DaystateLtd 2 ай бұрын
Both are super accurate, the best way would be to visit your local dealer and have a try for yourself, thanks for your comment.
@christopherallen4055
@christopherallen4055 Жыл бұрын
Does the Wolverine R have a similar design to reduce power using the hammer spring (so that you don't have to touch the regulator)?
@DaystateLtd
@DaystateLtd Жыл бұрын
its identical, but way not watch the Wolverine R video?!
@garybillington2239
@garybillington2239 Жыл бұрын
Is it the same for the Wolverine ?
@DaystateLtd
@DaystateLtd Жыл бұрын
same adjustment different acces to the hammer
@spencerburrows3525
@spencerburrows3525 Ай бұрын
How do you increase power on a 1980s Daystate Huntsman midas mk1? My rifle is only doing 7ft▪︎lbs. Ok it is a very old Daystate. I have chronograph tools. Would help me. No rifle/gun shops near me.
@DaystateLtd
@DaystateLtd Ай бұрын
Thanks for your comment, for all technical assistance please visit our website.
@anirudhpanwar6202
@anirudhpanwar6202 Жыл бұрын
is it also applicable to a huntsman classic FAC version...i hv one in 177
@DaystateLtd
@DaystateLtd Жыл бұрын
very simular
Daystate huntsman revere disassembly
20:41
Daystate
Рет қаралды 9 М.
Daystate Huntsman trigger adjustment
9:48
Daystate
Рет қаралды 2,5 М.
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Cometa Fusion laminate .177 review-Big Dan's Airguns.
25:51
Big Dan's Airguns
Рет қаралды 10 М.
Airgun - Install Altaros regulator to Daystate Huntsman Regal
7:44
Altaros Airgun, Slugs and Accessories
Рет қаралды 18 М.
Daystate Huntsman
19:32
Garden Guns
Рет қаралды 6 М.
You Need To Own This Refined Rifle - Daystate Huntsman Revere - Range and Country
22:14
Daystate huntsman revere reassembly
26:33
Daystate
Рет қаралды 3,4 М.
Top 10+1 Most Expensive Air Rifles 2024 - Off the Shelf - No Custom Builds - theGunLocker
47:06
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН