Daystate Redwolf reassembly

[@philbate5555]

Yet another great video jake , there's certainly a lot of thought gone in to the design of the red wolf.

[@sub12airgunners]

Yeah, its a great rifle, Thanks Phil.

[@slayer9240]

Nice video interesting to watch as I've purchased my own red wolf in December so really injoyed watching this.

[@hectorhtaylor]

Fantastic production as always - backed up by obviously deep knowledge. Thanks!

[@sub12airgunners]

Thanks, much appreciated. Thanks for watching

[@martinhart1798]

Great video chap’s interesting as ever

[@sub12airgunners]

thanks mate 😁😁

[@davidcorder2021]

Another great video, thank you....

[@sub12airgunners]

Glad you liked it, Thanks for watching.

[@christopherallen4055]

Where can you buy replacement safety action screws or what size are they? which replace the security ones shown in 8.32 of the video?

[@sub12airgunners]

They are M3 counter sunk and i think we use 8mm long 👍

[@moshikvano87]

Great video! thank you for sharing such an important information, at 16:22 you mounted picatinny rails adapters on top of the standard issue dovetail, can you please share a link, where it can purchased online? Thank one more!

[@sub12airgunners]

You can't buy them I machined a pic rail blank to fit it. Thanks for watching.

[@paulfoster543]

Hi Martin What length is the M12 stock bolt on the Redwolf/ Wolverine R models,i have bought a pre owned Wolverine R but it has a non Daystate stock bolt that is too long and is sticking out of the underside of the stock😮 Need to get one the correct length Thanks in advance Regards Paul

[@Japs_Eye_Of_The_Tiger]

Superb instructions, thank you.

[@sub12airgunners]

No problem, Thanks for watching.

[@PaulHamM3]

Hello mate , wondering if you have ever encountered a stuck magazine on a Redwolf ? I have the new style blue magazine on my old Redwolf and it seems that the actuator pin has become stuck and now the damn magazine wont come off the rifle, short of sending it back to daystate have you got any ideas on getting the thing off my rifle

[@RobinWardley]

excellent... thanks for your effort 🙂

[@sub12airgunners]

Most welcome 😊

[@maverick25100]

May I ask where did you get the flat pic rail on top? Or is that stock? I thought they come with a dovetail on top. Thank you.

[@sub12airgunners]

Yep they come with a dovetail normally but I machined a new pic rail adapter to fit over the top of the dovetail. Thanks for watching.

[@lorenzorommelaere9132]

when watching the clip. it doesn't seem too difficult to change the barrel to a different caliber. or am I wrong? regards

[@sub12airgunners]

No it is very simple but you may need to program the power curve 👍

[@lorenzorommelaere9132]

@@sub12airgunners that's no problem. I have placed a helliboard on my redwolf. thanks in advance for your response. and by the way, congratulations on your channel, I have already learned a lot from it. also the tuning of the hellibaord.

[@pappapoff]

How was the bills fail fitted pls and what make is it thanks

[@luisferreira633]

Thank you, that was very helpful. Brilliant work mate 👍👍👍

[@sub12airgunners]

No problem, glad you enjoyed. Thanks for watching.

[@hectorhtaylor]

Hi Jake. Have you produced a vid showing how to change the side lever over?

[@sub12airgunners]

No I dont but its a very simple procedure, just remove the bolt at the back pull the cocking handle out then remove the side cover plate and replace it on the other side, then just put back the cocking arm back. Thanks for watching.

[@hectorhtaylor]

@@sub12airgunners thanks. I thought there would be wiring to change over too.

[@jaytee8188]

Nice one Jeff. 👍

[@sub12airgunners]

No problem, thanks for watching.

[@paulblundell8033]

Great video, thank you. It would be nice if Daystate offered a board upgrade so older RW could have the newer software. I like the facility to adjust the sleep timer as i find it too quick on the original s/w.

[@sub12airgunners]

Yeah its a bit snappy with the original settings, not sure if Daystate upgrade the software during a service, or the older boards may not be compatible with the new software, not sure. Thanks for watching.

[@steve170563]

Grate video as always, can you give details of the picatiny rail.

[@sub12airgunners]

I did a more detailed explanation in the Red white and blue wolf build. Thanks for watching. kzbin.info/www/bejne/iqHCkpihbp2afZI

[@leec8592]

Brilliant video

[@lisawood516]

Great video mate 😁😁👍

[@sub12airgunners]

Thanks 😁😁👍

[@briansalmon2288]

Love your informative video's. I have a Red Wolf, in .177 one of the few things I really don't like is that ruddy 11mm rail. I notice with some pleasure you've fitted low profile Picatinny rails to your baby. could you inform me as to where and how I can obtain such pieces. I worked in engineering for some years, so can work on the gun confidently, just need clue. Please keep making your excellent videos.

[@sub12airgunners]

Hi, I just bought a long piece of pic rail, like the one linked below (Can't find the one I bought anymore), and machined it down then added a dovetail to fit the red wolf, after that I drilled and tapped the block with locking screws to stop it moving and keep it spaced correctly.Thanks for watching. www.ebay.co.uk/itm/264956810371?epid=812400056&hash=item3db0a81483:g:DhkAAOSwFntZbedM

[@johnshaw8013]

You got skills.... I'm a heavy engineer, specialising in milling, and CAD/CAM my average job weighs between a half tonne to five tonne. Gun parts I struggle to see 😂

[@sub12airgunners]

Thanks, yeah they do get a bit small, not done any CAM work myself, we don't have CNC yet so its all manual, but we use CAD to proof stuff. Thanks for watching

[@stuartpeacock7684]

Great vid as always. Can I ask where you got you picatinny bipod mount from.

[@sub12airgunners]

Thank you, it's an Atlas BT15 and we get them from Livens 😀

[@stuartpeacock7684]

@@sub12airgunners Thank you. Looks like the dont come with any screws. Could you tell me what size to order and where from if possible. TIA

[@chrispeat285]

Great vid 👌 I don't have a red wolf or ever will but I watched it anyways 😜

[@sub12airgunners]

Thanks, its always nice to see whats happening in other rifles, Thanks for watching.

[@pappapoff]

How is the rail fitted and what make is it pls

[@sub12airgunners]

the pic rail on the block is a home made one that is machined to fit the block the front rail is a Atlas bt15 fitted with ss top hats on the inside of the stock 👍

[@pappapoff]

What are top hats

[@sub12airgunners]

​@@pappapoff they are Stainless steel bushes we make that we epoxy in to the stock from the inside then the rail screws on from the out side 😀

[@sub12airgunners]

kzbin.info/www/bejne/n4LNiZWKl9qBbMk

[@warrenfarming5663]

Do you have a programer for the daystate redwolf

[@sub12airgunners]

hi yes we program our guns

[@warrenfarming5663]

Thanks for reply do you know were I can purchase a programmer for redwolf

[@sub12airgunners]

@@warrenfarming5663 they are very tricky to get hold of AOA did sell them a while ago but i am not sure now

[@jeffhello1444]

you the man 👏👌😃

[@secondfirstsecond]

hi does it come with circuit diagram?

[@sub12airgunners]

No, unfortunately no circuit diagram. Thanks for watching.

[@PaulMoorhousehankooks]

Fantastic thanks

[@sub12airgunners]

Most welcome, Thanks for watching.

[@dionisioarnalgarcia7744]

genial explicacion y eso que uso la IA de voz.

[@sub12airgunners]

thanks 😁

[@phillipsharpe6459]

Ooh look a bluewolf, 😂🤣👍

[@sub12airgunners]

😁

[@Cainmoa]

haw can i enter in the display timer ?

[@sub12airgunners]

You need A rifle with the newest software installed, the older versions of the rifle did not have that option. Thanks for watching.

[@andydowden8117]

👍

[@sub12airgunners]

👍 Thanks for watching.