Dbx driverack pa+ repair does not turn on fix

[@inoutsolucoes8512]

Good Morning. Dear, you helped me a lot because I have two DBX's on the bench. Thank you for your help.

[@vergilcase9515]

Thanks for the video. You just saved me a ton on a repair/ replacement bill.

[@hollywoodthedj1673]

You Did A Good Job Figuring Out That Problem I Have One Now Just Like That One My Screen Is Doing The Same Thing Im Going To Take It ApartAnd See If The Capacitor Is Messed Up I Just Need To Know Where To Buy Another Capacitor From!

[@hitandrepair]

HollywoodTheDj eBay or amazon!

[@palprofesional]

I have a case for dbx pa+, the input/output signal is read but there is no sound out, can it be indicated that the DAC IC (CS42528) is damaged?

[@khoshjawahir715]

Can i replace CS42426 with CS42528 in my driverack PA+? Because the DAC ic of my driverack PA+ is CS42426

[@andresmacias4229]

I just came across this video and I’m wondering how you can easily tell which capacitors need to be changed out, thank you

[@rpbrichard]

Do you know where the CR2032 Battery goes? I just received a Driverack PA (not the "+"). The insides look very similar to your PA+. I was told the unit will not hold memories because the battery needs to be replaced, but I cannot find any documentation on where the battery is. TIA, Richard

[@hitandrepair]

rpbrichard I don’t recall seeing one in this unit. The eprom chip might be bad then.

[@ramirovasquez4807]

@@hitandrepairwere can i contact you

[@hitekhead]

hi there, I am repairing a driverack PA, the original, (no muting switches) and need a display. Any suggestions where to get one? DBX has been USELESS so far. thanks for your help.

[@hitandrepair]

@@hitekhead send me a photo of the display part number if you can find it. Hitandrepair at gmail

[@ravindersagar5814]

Superb love u to sir

[@user-fq5gq3lu4w]

I have a DBX Driverack PA+ but have the problem WAITING FOR FLASH DOWLOAD at startup. I need the file extracted from the U17 chip, but on the DBX website there is only a Firmware update which doesn't work. please help me

[@olaten9234]

Good morning. Please my pa+ is bringing out irritating sound when in use. I noticed that the sound indicator for the output is always moving even when I don't have an input inside it. Please what can I do?

[@djsutej9013]

I Have Same Driverack overall ok but I didnt get output from it what can I Do For Solv problem i had reset also but it doesnt wrok

[@stipevalidzic7704]

I got isue with dbx drive rack pa as one of the chanal got distorsion. But not all the time. The one capacitor on power suply doesnt look the same ass the other one. Can be that a problem. Tnx🤗

[@stipevalidzic7704]

That chanal starts to work ok when I incrise volum of signal. Input

[@djalberto4506]

Hello friend, thanks for sharing, I need your help, could you tell me what part number the part has that is very close to the filter that you changed, which has the code on the U27 board. I have that model but the part burned and I can't see its part number, it would be very helpful thanks

[@pravinjhinkoe]

Do you got the part number .?

[@miroslavdimitrov5486]

Thanks for the video. I have a dbx 220i and the program display just says "F" and the load button is illuminated in red. I can't connect with the driveware. Does anyone has any ideas? Thanks.

[@djalberto4506]

I would be very grateful for your part if you would help me friend. The reference number on the main board where the ic is is U27 I can't see its part number it was short-circuited and nothing is seen

[@albertoalvarezjr.9501]

had same part burned U27.. any info regarding the part number.. thanks

[@magnustorque5528]

Why doesn't DBX use longer life / higher temp electrolytic caps in these units? Same problem but worse with their 1261, 1260, 641, the Zone Pro line. It shouldnt' be happening.

[@amthanhvlogchiase4915]

Pa+ của bạn có ra âm thanh không?

[@shaunkellister6597]

I have something I wanna fix same dbx it started smoking 😢

[@iphilrembes6622]

Bagaimana jika ic disamping 3 kapasitor (u27) meledak dan terbakar. Keadaan rusaknyaa juga sama. layarnya eror. Apakah anda bisa memberi petunjuk saya ?

[@pravinjhinkoe]

Do you have the part number for U27 ?

[@hardihobyelektro8171]

can i have the schematic, thanks

[@hitandrepair]

I work without schematics, and independent repairer. Why or how would I have schematics

[@hardihobyelektro8171]

@@hitandrepairOk, thank you