DC ELECTRIC MOTOR REPAIR

[@CraigArndt]

Just another easy fix for the 'King'! Way to go, those actuators are powerful. That 50" deck isn't light. Ready for another 20 years of service. Great fix EJ.

[@PhilDapple]

I agree about the "PL" products. I use it all the time but never knew It would do that!! I enjoyed this video. It answered my questions and I learned a new "PL" trick. Thanks!! 🕶

[@805ROADKING]

Yeah the Cub is a much cooler Machine!! I had an 82 Craftsman since it was new and it never let me down an it's still in great shape!! My Brother in Law gave me two Craftsman Tractors from the 2000's and they were complete junk!!☺

[@UnitCrane514]

Yep I take that antique cub over the Crapsmen anyday! I had a early 70's Sears tractor when I was a kid and that was a NICE well built machine!

[@805ROADKING]

Thanks Bud!! You ain't kiddin' about that deck!! I've been dragging that deck from one side of the garage to the other since that POS has been here!!☺

[@Jay-ex9fb]

Thanks I appreciate you making this video I'm using a dc permanent magnet motor for a wind turbine and this video really help me understand how to put back this type of electric motor. Thanks alot !

[@MrComaToes]

good job brother... lil racer did good too... acuators aren't cheap but not massively expensive. Maybe the original part would be but you could get aftermarket.

[@805ROADKING]

Thanks Jim!! I couldn't believe we got that one running again!! There was so much mud, rust, and corrosion that the magnets came off the case!! Lil' Racer outdid himself cleaning that up!!☺

[@not2fast4u2c]

Pretty Good Repair there that is a neat item you could make a cool invention outta one of those DC motors are pretty tough most repairs are just new brushes or bearings

[@805ROADKING]

Thanks Mate!! I appreciate you checking it out!!☺

[@805ROADKING]

Thanks Tom!! That's the word I couldn't remember in the video (commutator) I hardly do any motor work, but that's good to know!!☺

[@805ROADKING]

Thanks Toes!! I did a little research and an exact replacement for that Actuator would cost $900, if you could find one!!☺

[@805ROADKING]

Thanks for tuning in Mate!!☺

[@805ROADKING]

Thanks alot Poole!! I appreciate the compliment!!☺

[@mirodeogrl]

Good work Bud, glad you got it working.

[@805ROADKING]

Thanks Bud!! Yeah this video was taken before I fixed it!!☺

[@805ROADKING]

Thanks Bud!! Yeah they're a piece of cake if ya got someone else to hold them in eh!!☺

[@tomwaters86]

Really enjoyed that. You explain everything really well.

[@805ROADKING]

Lil' Racer's Cool, He takes care of Uncle RoadKing!! I think he mowed my lawn more than I did last year!!☺

[@805ROADKING]

Thanks Buddy!! Me too!! Those things cost a fortune if we had to buy a new one!!☺

[@805ROADKING]

Thanks Kay!! I think I got lucky with this one!!☺

[@josephsmith2069]

I have a window wiper for my truck and i stoped working when i took it apart i noticed it was missing one of the brushes... If u are missimg a brush where could u get one?

[@thatguyoverthization]

Nice job, was that the seat you fixed with plasti dip?

[@MrComaToes]

I actually have worked on many of those actuators... and replaced them for about the same reasons, then repaired the old ones pretty much the same way. They are fairly common, not surprising an exact replacement is $900, but an decent replacement would be around 100 bucks on ebay

[@805ROADKING]

You got that right Skippy!!☺

[@805ROADKING]

Thanks Matt!! Yeah I have enough trouble trying to thread the screw in the little hole without the goddamn magnets pulling it away!!☺

[@jmdogful]

so your plasti dip seat repair dod not work to well? Or was this video made before that one?

[@231flash]

You got your hands into everything....

[@RayThackeray]

Which way do the magnets go in?

[@805ROADKING]

Thanks Ziggy!!☺

[@805ROADKING]

He did!! He had the Craftsman first, Then I found that Cherry Cub for him, so he'll probably be selling the Craftsman now!!☺

[@devilswish8876]

what wuld hapen if those magnets in the starter motor brake? wuld the motor still work?and what if externaly power is aplied to that motor wuld that motor act as a magnetic brake?

[@805ROADKING]

Thanks Bud!! It was an overhead tripod!!☺

[@805ROADKING]

Thanks alot Foot!!☺

[@Harleymansgarage]

Nice work sir!!

[@805ROADKING]

Thanks alot Bud!!☺

[@805ROADKING]

Thanks Bud!! The worst we could do is break it worser eh!!☺

[@805ROADKING]

Thank You Bud!!☺

[@apuparmar5995]

Helpful video man! So is that thing still working? Did you replace any bearings or just cleaning and everything you did in this video?

[@805ROADKING]

It should still be working, we sold it!! No bearings, just cleaned it an glued the magnets in place!!☺

[@805ROADKING]

Thanks alot Buddy!!☺

[@heyroldjuniorcambry1991]

Hello , hope all is well with you , I was wandering how would you go about to salvage the magnets from the case without damaging them ? Do you thing heating the case would make the glue melt ? Any suggestions is appreciated . Cheers !

[@805ROADKING]

Maybe heat or soak it in lacquer thinner or acetone might soften the glue!!

[@heyroldjuniorcambry1991]

Awesome I will try that thank you !

[@805ROADKING]

Thanks Bud!! Yeah and the sooner I can get that POS outta my garage!!☺

[@RamblinAround]

Good stuff...nice work!

[@805ROADKING]

Thanks alot Mate!! I appreciate it!!☺

[@motoforlyfe]

Nice fix buddy!

[@Mr3wheeledbike]

nice mower there

[@805ROADKING]

Thanks Buddy!!☺

[@805ROADKING]

thanks Bud!!☺

[@billk6494]

Nice Video !

[@805ROADKING]

Thanks Bud!!☺

[@billk6494]

805ROADKING ~ your welcome, interesting & educational video..

[@creamofcardstv]

805roadking to the rescue again :) Great tips!

[@805ROADKING]

Lol!! thanks Mate!! It's always something eh!!☺

[@litefoot900]

Another great video, thanks

[@thenoid5131]

cool video just did blower motor on my car the stealership wanted $800 it took me 1 hour and no parts needed just cleaned her up same process in your video here

[@805ROADKING]

Thanks Mate!!☺

[@805ROADKING]

Nah the plastidip is holding up great!! That was taken before I fixed it!!☺

[@ChiTownTino]

Well done

[@mubeenahmad8016]

how we charge magnet ? if the magnet is weak

[@805ROADKING]

Lol!! It keeps me outta trouble!!☺

[@savionics7923]

good job mate.

[@805ROADKING]

Thanks Bud!!☺

[@edzgarage]

Nice! No jobs too hard for the KING!

[@UnitCrane514]

I thought Lil Racer just got that nice Cub Cadet?????

[@ziggassedup]

Good fix.

[@crabbitoldgirn]

Great vid, thanks for sharing :)

[@mortensgarage]

Nice vid And good work

[@krazy45cat]

Now he has to mow your yard :)))

[@englishwithwisehakim2509]

really nice video

[@805ROADKING]

+Hakim00050 Wisehakim Thanks Bud!!☺

[@outdoorsman310]

i gotta fix a steam cleaner motor!

[@samirradi5993]

Construction Adhesive . heavy duty adhesive 375

[@805ROADKING]

Everybody likes titties eh!!☺

[@outdoorsman310]

those brushes can be a real pain in the dick!