DCT Adapters for Any Engine! Easy Dual Clutch Swap for BMW/DSG/PDK to LS/JZ/RB/M50/K Series etc

[@jdoggsgarage4494]

Just a word of advice, the adamat hub will break on a 4cylinder, that's why we approached clutchmasters in the first place. We have beat the snot out of the clutchmasters hub in our s2000 as well as others with no failures.

[@SeemsLegitGarage]

ADAMAT made a design update a long time ago and we havent had an issue since with any 4 cylinder

[@jdoggsgarage4494]

@@SeemsLegitGarage I pulled 2 of the updated ones that had busted springs out last month.. same failure as the original and with less than 100 miles on them. It seems they are ok until around maybe 7500-8000 rpm, but the first 9500rpm rip blows the springs out.

[@spoofsports]

@@jdoggsgarage4494 I’ve heard similar stories about the Adamat as well. 😢

[@Kj16V]

Why do they break in 4-pots? Something to do with the power pulses?

[@jdoggsgarage4494]

@@Kj16V yes. Harmonics are harsh on a 4 cylinder

[@fde4683]

I guess my solid flywheel kit going on the wall

[@TutelaryXiie]

Doing the Lord’s work

[@spdcrzy]

N/A LS + PDK seems like the perfect combination to put into a 2nd gen Pro Touring Camaro...and I'm amazed absolutely nobody has done it yet.

[@SeemsLegitGarage]

They are transaxle mostly so unless you put the engine in the trunk idk

[@spdcrzy]

@@SeemsLegitGarage I mean, the Corvette already did it with a torque tube. Any reason the same thing couldn't be done here? LS, torque tube, PDK, custom double wishbone suspension front and rear.

[@SeemsLegitGarage]

@@spdcrzy Its just a pain when you can use a bmw 7 speed easily and works just as well

[@spdcrzy]

@@SeemsLegitGarage PDK can handle WAY more torque with clutch upgrades, can be run hard on the track with no issues, and can do hard launches basically forever. And it has way better logic for "normal" driving. Also, BMW's DCT doesn't come in transaxle form (AFAIK).

[@SeemsLegitGarage]

@@spdcrzy logic really doesnt matter with aftermarket control. I have supported DCT builds with close to 1500hp. Stock clutches on the BMW trans can hold around 750 with HTG control and increased pressures.

[@Omega_TTRS]

Can you guys do stuff for cars with a transaxle? Like on the C5-C7?

[@fixyourautomobile]

I'd be interested in pairing an Audi AAN 2.2T with a RWD DSG transmission for my truck. That would be an 01e bellhousing pattern on the Audi engine.

[@zaythesensei4018]

If I wanted to throw the newer DCT’s out of the f13 m6’s or the new m5 DCT into the older E63 m6 would we still have direct access to the shift timing adjustment the way you do with the smg ? And how long would she be out of commission for said swap if I got her up to detroit ?

[@jacktheaviator4938]

I have considered a DCT for my Fiero track car. Which one do you think would fit well with a 400hp Iron Duke? I am pretty limited by space.

[@dieselstar5]

Would any of the V8 adapter work with the C63 W204? I’ve been thinking of this idea for a very long time. Kudos to you for making this a reality for us car guys.

[@SeemsLegitGarage]

We could yes

[@eddieve-t910]

Could you guys do one for a Nissan sr20vet fwd?

[@richardbrunt5434]

so would this work with a 997 pdk and adding a ls3 to the car?

[@Suave_rick]

Hi, I’m working on my e24. Automatic transmission is broken and I was planning to match the m30 engine with a dct. Do you have adapter plates for a 8hp45 or a 8hp70?

[@taylortankersley6325]

Have you fellas noticed any significant jump in price of the GS7 DCTs since these swaps started gaining traction?

[@SeemsLegitGarage]

the M4 ones pull a nice penny but they are for sure stopped going up from the initial rise

[@Iusniqa]

Do u guys produce for volvo 5 cylinders? The car is front wheel drive

[@Formula1-Dave]

I'm also interested in a volvo b5 conversion.

[@Iusniqa]

@@Formula1-Dave b5 already has automatic trans no?

[@Formula1-Dave]

@@Iusniqa it does, but it's very sluggish when motor is modified.

[@K1L0GG]

Hey bit late, do you guys do r33 rb25 conversions?

[@SeemsLegitGarage]

Yes we have RB adaptors for DCT

[@FlockaGarage]

What are the options to control the dct ? Any sort of standalone option or wiring integration? (For LS)

[@SeemsLegitGarage]

We sell HTG controllers for the DCT, check out our tech article outlining everything. We have wiring harnesses available and you just need to tap into a few signals on the vehicle side. www.seemslegitgarage.com/post/dct-bible-chapter-3-control

[@tenlmao]

What BOV or wastegate is that in the e46?

[@user-ki8zf1rp1e]

I've noticed you guys now have DCT adapter plates for the B58. I saw Adam LZ's vid and was wondering, If i were to swap a DCT into a 340i (F30), would i need a custom driveshaft? Also, is it physically possible to mount a Ford 8.8 onto the F chassis?

[@SeemsLegitGarage]

Yes you will need a custom driveshaft, and yes it is, we will be releasing our f30 and supra 8.8 kit very soon, the last pieces are in production.

[@user-ki8zf1rp1e]

@@SeemsLegitGarage Love you guys, truly. This type of innovation and r&d goes underappreciated.

[@SeemsLegitGarage]

Thank you!@@user-ki8zf1rp1e

[@Pedro-uj9dc]

Nice video. I have Aventador, and i would like to put a dct on it. Is it possible to change this Lambo v12 to a dual clutch transmission?

[@SeemsLegitGarage]

My guess is not without a crazy amount of work because of how their AWD layout is

[@paidoclock]

Try porsche pdk, it's possible

[@joshuritis1039]

Can you make a DCT work with an 03/04 Cobra 4.6L stock engine or do u need a GT 500 engine 5.2 or the Coyote 5.0?

[@SeemsLegitGarage]

We can make adaptors for any engine if you email [e-mail] we can help

[@MoonMoon-co4rc]

Hello . Tqsm for the video . May i ask . What is the DCT 7 speed for my E60 M5 V10 ? . Better using F10 4.4 twin turbo or E92 M3 ? That can make it shift smoothly but still can shift smooth agreesively such as using Sport mode or rise the gear shifting bar . Or u got any better suggestion to me . Thx again

[@SeemsLegitGarage]

Depends on your available diff ratios. E92 M3 would be easier but limits to very low diff ratio. Shifting can be as smooth or hard as you want, no sport button though

[@YAXHY]

You guys think there's a chance of swapping dct in a 2is lexus is350?

[@dats.stew_VQ]

Can I put a F82 or 335i DCT in my 6mt G37 ???? I’m still on standby with swapping it

[@SeemsLegitGarage]

Yeah we can make a custom adaptor for the VQ. Email [e-mail] and we can get it going

[@sharifkhan6814]

can a DCT transmission swap onto a S85 M5 V10?

[@SeemsLegitGarage]

Yes we can make an adaptor plate for that easily

[@OctaneAndAdrenaline]

Can the dct be used for a fwd car? Can it be done with custom work?

[@SeemsLegitGarage]

The VW DSG can be used for FWD cars

[@OctaneAndAdrenaline]

@@SeemsLegitGarage not the dct with custom work?

[@SeemsLegitGarage]

The DQ250 is a DCT its just called the DSG @@OctaneAndAdrenaline

[@OctaneAndAdrenaline]

@@SeemsLegitGarage is the dq250 fwd? I

[@SeemsLegitGarage]

yes @@OctaneAndAdrenaline

[@9thgatedim273]

Interested in a swap for my 55 bel air is there a tcm to communicate to the ls motor

[@SeemsLegitGarage]

Yes the same one we use, we can use with that motor, the HTG GCU

[@mostwanted6379]

do yall have adapter plates for m50 to 8hp45 and also adapter for rb20e same 8hp45?

[@SeemsLegitGarage]

yes

[@BLACKY505]

Can subie swap dct or dsg?

[@SeemsLegitGarage]

DSG is for east west engines, DCT is for north south engine layouts

[@BLACKY505]

​@@SeemsLegitGarageso dct is compatible for subie? Can you make adapter for subie?

[@davidgriggs3967]

Got anything that will bolt up to a fwd 6 bolt 4g63t?

[@SeemsLegitGarage]

yes a dq250

[@tvkr1946]

have u 3uz fe dct kit?

[@SeemsLegitGarage]

Yes we can have this made, have 8hp to 3uz in stock

[@tvkr1946]

@@SeemsLegitGarage thank you .

[@q2subzero]

Has anyone asked for DCT adapter for 5spd or 6spd Subaru Sti EJ25 engine? Is this something that's possible to do? What about a DCT replacement for Subaru's older 4EAT?

[@GregHarris-wu9pu]

I would also like to know if there has been any interest in this area for the Sti. I think that is a vehicle that could definitely benefit these types of swaps. I know it might be harder since it's AWD, but I would want to do it.

[@nismomo23]

Will this work for a vq35hr?

[@SeemsLegitGarage]

Yes we could do that