De'Longhi Nespresso Gran Lattissima EN650 Infuser replacement

My De'Longhi Nespresso Gran Lattissima EN650 had started to leak water into the drip tray. It became so bad I had to empty the tray every two coffees. It also meant the machine didn't deliver the correct amount of coffee to the cup as half of it was in the drip tray. In this video I show how to replace the infuser with a new one. I also show how to dismantle the case of the coffee machine.
Infuser Part Number: 731254691

[@duketurnercrypto]

Thanks Dave! The new part works great. No more leaks! 😊 I believe the original part went bad when my visiting relative manhandled the lever when the pod bay was full. Instead of emptying the used pods he forced the lever down which most likely bent an internal part and prevented it from sealing properly. The new part arrived in a couple days and I followed your instructions. I am happy to report my Nespresso machine is back to work again making my morning coffee. Thanks for the help!

[@AndyTinkler-d3w]

Brilliant video thanks - spare part cost £45 and saved me having to spend £350 on a new machine.

[@ozmoo]

Thanks Dave! Well explained and well filmed. You’ve saved my machine from the landfill and many dollars from my pocket!

[@icejedy1]

thank you very much! i can fix my coffee machine now!!!

[@Kath33333]

Thanks for a great video. I had a different problem and couldn't work out how to get into my machine before I watched this. All I did was follow your instructions until you removed the top and pulled the little plug. I then plugged it back in and it reset my machine and it's working again. Thanks

[@StuartCGadgetRev]

Brilliant video, thanks. You helped me fix my machine; I had a similar fault.

[@AleishaButler-uy1xx]

Thanks so much Dave! It worked for us and we are now so happy to have good coffee without the water loss!

[@budzhusky]

This is a great video Dave. This seems to be a common problem with the Nespresso machine, well for me at least. I had the infuser fail on our previous machine the EN720 and now on our current machine EN650B. I looked high and low for a manual and couldn't find anything relating to this machine, (the milk frother was playing up a couple of weeks ago and it didn't seem to be a common problem). Then I stumbled across this video which is a great help. Thanks.

[@pomster63]

Good on you, Dave. Just done mine. Works a treat. No leaks! Many thanks!

[@bethmartin527]

Thank you you have solved how to fix my water leaking problem 😊

[@PIERLUIGICARDACI]

Thanks for your video, you're the best! GRAZIE!

[@naomi6444]

This was very helpful. Thank you!

[@ryanknight3366]

Great detailed video just fix mine now 👍🏻

[@santiagoquintana1108]

Where did you buy the infuser?

[@shaheedshreef]

Thanks so much..very helpful

[@ramban3488]

Thank you for your wonderfull video I have the same problem only mine it is less than 6 month old machine, it has occasional leack issues but the worst is it never puncture the cartridges of coffee which always cause the coffee to leak in the tray and the cup of coffee fills with water more than coffee ! I tried to follow your steps on your other video ( cleaning the plate with tooth brush to get out any coffee deposits that could be blocking the holes in side that plate but I got no improvements , I used deblocking cartridges that has inside descaling products instead of coffee but that didn’t work either .. I want to open and try to clean the plate but I wonder if after removing this plastic cylinder would I be able to have access to the plate to have look at it ? Thank you

[@marceelen26]

Thanks Dave. I have the same issue. What is the Philips screwdriver size? I just don’t have something that fits right now.

[@Jovica.C]

Hi what is the part number of the replacement part. ?

[@user-kb2jn2ny2g]

Дякую

[@Victorx81]

Thank you very much for share this video, from me like and subscribe+ *+ **+* * *+* +* ** ****