RESTORATION/RESURRECTION of BURNED 1950 Harley Panhead Linkert Carburetor!

[@Billy-703]

Super entertaining…right down to the cold beer! 🤘🏻 Thanks for the content! I wrench on vintage choppers & don’t think I have watched tv in over a year 🤣 so many great channels YOURS included!!!

[@DeathProofProductions]

Thanks For the compliment, I do like my cold beer when the work is done.

[@nop3noperson]

Yep.. new favorite sandwich and a beer video series.

[@DeathProofProductions]

Thanks that means alot.

[@nop3noperson]

@@DeathProofProductions i hope shows like yours continue. I have not watched t.v. in 10 years.

[@thomas-son9281]

Very cool intro and great work on the restoration.

[@DeathProofProductions]

Thanks my son will like the comment.

[@scarredface2684]

As much as I love the .38 restoration, this Carb restoration topped it. Inspirational artwork🤌🏼

[@DeathProofProductions]

Thanks, my son will like hearing that.

[@Nothingz3dge]

Awesome quality intro! You deserve more views for this quality of video making

[@DeathProofProductions]

Thanks for the compliment. You tube hasn't really started feeding it to people yet so it might pick-up soon.

[@steve28849]

glad to see you're back. Amen

[@DeathProofProductions]

Thanks, After 2 shoulder surgeries and months of rehabilitation it's good to be back in the shop.

[@PavelNSK]

Получил эстетическое удовольствие от просмотра! Спасибо! Здоровья тебе и всех благ!

[@DeathProofProductions]

Thank you.

[@michaelmitchell5909]

Ive never seen anyone restore a harley carb as good as you have...

[@francoisharua9070]

Travail d artiste good job Guy

[@DeathProofProductions]

My son will really appreciate that.

[@tannasmithoutdoors]

Nice video introduction! Cool video and editing too.

[@DeathProofProductions]

Thanks for the compliment means alot.

[@murphy6767]

Good to see you posting video's again...

[@DeathProofProductions]

Thanks, shoulder and bicep is healed up enough that they are letting me do light stuff.

[@whip-its_dad4239]

Great rebuild . Sure would like to see a more in depth video on the cadmium plating if possible . Thank you .

[@DeathProofProductions]

I can put it on the list.

[@Dorngrunder]

Really like the series 🤟 greetings from Sweden 🇸🇪

[@DeathProofProductions]

Thanks.

[@richc767]

Nice work. Looks like new.

[@DeathProofProductions]

Thanks for the compliment.

[@Crslawncare13]

Hey, it’s good to see you! Excellent video on the resurrection of the carb💯 hey, don’t be a stranger on KZbin. You got my prayers buddy.

[@DeathProofProductions]

Thanks, shoulders getting better so were gonna get back at it.

[@Crslawncare13]

@@DeathProofProductions i’m really happy to hear ,this 👍🏻 take care of yourself and be safe out there

[@Roadmonster1]

Awesome video!

[@JL-un6eb]

Dude. You are back.

[@DeathProofProductions]

Yeah shoulder is about healed up. Ready to get back to work.

[@vk7408]

I really appreciate your expertise and knowledge with the pan project and the excellent camera work but we could learn so much more if you would add some vocal explanations to the in depth work that you do. I have a linkert I'd like to rebuild and it would really help coming from someone with the knowledge you have. Thank you

[@DeathProofProductions]

Our intention is when I'm done with the restoration were gonna do a vid showing the complete process and I will explain in more depth.

[@vk7408]

@@DeathProofProductions nice! thank you so much. You really put out some of the highest quality video work and your tutorial explanations of how things work, and how to repair are extremely helpful

[@joaquinmotor]

great job mate. cheers

[@DeathProofProductions]

Thanks.

[@langstonjones69]

Good stuff brother!

[@DeathProofProductions]

Thanks.

[@пожилаябилибоба-к2л]

Даже непонимаю, почему так мало просмотров. Отличное видео👍

[@DeathProofProductions]

Thanks for the compliment on the vid .

[@steveraus3495]

I've watched this video 3 or 4 times now, and while it is interesting, I wish you had explained more about the process. The plating, tumbler, what each part is and does, etc. I have an old Linckert I need to do the same to, and I need help.

[@DeathProofProductions]

Shoot me a email at [e-mail] with what questions and I can walk you through it.

[@anthonyloscavio7532]

David you've got skills. I also would like to learn more about the plating process. It was also entertaining aside from the technical excellence. Your son is talented. BTW what did you do to your shoulder?

[@DeathProofProductions]

Thanks for the comment my son will really appreciate it. Man I got hit on one of my bikes and had to have shoulder surgery.

[@FreedomRider1982]

I just came across your channel in my feed actually and I'm happy to support your efforts and those of other fellow moto content creators. I look forward to seeing and hearing more from you in the future, keep up the great work and ride safe out there.

[@DeathProofProductions]

Thanks that really means alot.

[@FreedomRider1982]

@@DeathProofProductions youtube.com/@DeathProofProductions👍

[@Michel-vr6bx]

Nice job dad this is lane

[@DeathProofProductions]

Thanks

[@Bmcdanman123]

Hey man I need help from you!! I just got my bike out together a 2008 Electra glide , it’s a 96” to 107” cylinders bored amd small cam, little bit head work, just valves and cleaned up, 2 into 1 exhaust; now all together and only 9 miles on new engine oil coming out breather , lots of it, it’s not too full, I’m thinking one of my o- rings wrong? Or missing I suspect the oil pump o ring or the umbrella ones on top of the rocker box? What you think? Need your help I live in Chattanooga!!

[@DeathProofProductions]

Did you pull the oil pump when you did the cams.

[@Bmcdanman123]

Yes

[@Bmcdanman123]

Sorry so late to check your response I’m out of town at dads finishing list of repairs on his house

[@Bmcdanman123]

Yes

[@Bmcdanman123]

@@DeathProofProductions I think the o ring i used may have been the wrong one here? I’m getting a gasket kit redoing all of it? Not sure if all the o rings are correct ? I don’t have previous stock rebuild to go by? I’m gonna work with a local bike shop and try and line up correct o rings ahead of time amd place them back in the bike second time!! Hopefully get them all correct from cam chest all the way thru the top?!?!?!

[@michaelmitchell5909]

Hey man,awesome video... love watching your channel, especially this panhead rest.... Can i ask a question...my back spoke wheel on my 04 rk needs trued according to my mechanic. The bike is swimming all over the road and is not ridable over 50 mph. Hes does not true wheels and recommended i get mag wheels. I want to do that but my ass is broke with a 900$ mortgage. My ? Is if i out the bike on my bike jack could i tighten the spokes that needed to be just buy spinning the wheel and squeezing them, also tapping them to hear the tightness or lack there of....i dont have a truing stand nor the ability to remove and replace the tire. Any advice will be well received and very much appreciated man....thanks

[@DeathProofProductions]

Yes, I've done it on the bike many times. You need to rig up something ridged that you can measure tolorence with eather mounted to the bike or the ground. Then you just work your way around till you get it in spec. There's really nothing to it.

[@michaelmitchell5909]

@DeathProofProductions awesome man, thanks for responding back, means alot. I'm gonna giv it a go myself for sure. Then one day get a pair of used mag rims for it. Take care man.

[@michaelmitchell5909]

​@DeathProofProductions hey man, wanted to update you on my wheel truing on the bike. I found that every spoke was loose, some were fused to the nipples, one was broke. I managed to get em all tight and the bikes riding stable again. As for the one broken spoke. Will the rim be OK with 1 less spoke?. I cut it off at the nipple cause my mechanic is to busy to help me out right now. I don't have means to take the tire off amd replace the spoke myself. Im.not gonna go racing around with the bike, just to use it to go to work at the mill. I do plan ok getting mag wheels in the future. Thanks for your advice and time man.

[@DeathProofProductions]

1 spoke won't hurt. Just curious what kind of mill do you work in.

[@michaelmitchell5909]

@DeathProofProductions I worked for Perryman company doing titanium raw fab milling. I was late off in 20 cause of covid. Did some Mason work for a while cause that's what I've done for 25+ years. Now I'm in another titanium mill working g on a Trumph laser machine cutting out titanium shims for hydrogen batteries...id rather work on harleys any day man.

[@Dr.Harley]

What do you use for cad-plating?

[@DeathProofProductions]

It's a kit you can buy from caswell

[@Dr.Harley]

@@DeathProofProductions is it the Copy-Cad set? I always thought it'll make everything shiny

[@DeathProofProductions]

it will if you buy and use the brightener

[@Dr.Harley]

@@DeathProofProductions thank you 👍🏼

[@xxihasxx]

it's taking to long to finish!

[@DeathProofProductions]

When I got hit by that motorhome on my bike last October. it tore my bicep and labrum I had to have two surgerys. So iv been laid up for six months. I did just get released for light duty so we're able to get back at it.