Decagon - The Ultimate Wheelie Machine

This is some of the best clips I had of the 2021 season for my custom 1:5 Open-mod Rc Snowmobile. All of those clips were performed under 50% throttle, otherwise would flip back on itself. That's just how insane this unit is. The maximum I have personally being up to 75-80%, but that's just a pointless amount of power for a machine of this size.
There will be another big compilation this fall about the best clips of the season, so stay tuned for that! There is also more content coming on the channel for this spring/summer. Consider having a watch then :D
Thanks all for the awesome season!
Pascal
//
Full series on Decagon : • Project Decagon - Most...
Music : Falling Giant - Hades
• Falling Giant - Hades ...

[@SheldonMorris08]

That thing is nuts, that machine is king of the hill.

[@sledmaker]

Love it how you proved wrong 'Money can' t get you happiness'. We need to get that dynamic weight shifter working so this rocket can go sidehills😛

[@dustin.pietila]

13 hours ago?

[@Pascal_Robert--Rc_Creations]

@@dustin.pietila early acess :p

[@dustin.pietila]

@@Pascal_Robert--Rc_Creations Oh...😏

[@craig9948]

gyro controlled rider forward/back so as the pitch increases the rider moves progressively forward using a cable with a servo under the hood. Really cool stuff though you are doing with 3d Printing and RC toys that don't exist.

[@peterrull5438]

@@craig9948 perfect idea if it can be pulled off

[@burk3552]

The wheelies,the editing, the music...top notch brudder!!!! Decagon is an absolute animal! Sounds crazy hah

[@owenb4415]

This is so freaking cool. Awesome job man please keep this content coming.

[@MrDrTanasit]

I pressed "LIKE" button even before I started watching the video. I've been following this one all along. GREAT job.

[@mosesbavilla737]

I like your content and all the times/years of your dedication of making this type of rc hobby. I've always wanted to make my own but I am lacking the funds an hardware. Love how far you have gone with the creation of snowmobile rc.

[@wheeliegriff777]

keep up the good work man love the vids!!!

[@piraterc1213]

Ok. So you’ve developed and built an amazing machine. No doubt. Very excellent!👍 What you need to develop and implement now is a scale rider with counterbalance capabilities. I believe in you.

[@Nordspets]

Damn that thing look powerful!

[@1_wheelshredder973]

Can’t wait for more content

[@UppfinnarAXEL]

I wonder why no big rc company has thought of rc snowmobiles

[@stellanbudh3825]

Awesome you are the best on Yotobe!!! Im from Sweden.🙂👍👍👍👌

[@keyansharer6364]

Thing = 🐐🐐🐐🐐🐐🐐🐐🐐

[@AllensDoItYourSelf]

Nice bro

[@MsHigheagle]

Total power wheelies on command! It does not need much weight shift to steer when it's in wheelie mode

[@dustinahner598]

Do you plan on building more and selling them? I would be very interested if so , be waiting for somthing like this for decades .

[@billyjaggard9696]

Nice

[@martenwikner121]

i would love to see one with whaigt tranfer but awesome video keep up the good work:) (im sorry that i cant write)

[@theironman_man291]

Hey man so I printed one just like yours. I was wondering how do you get it to nice wheelies? In the one in the video it has lots of power is that what I’m missing?

[@peterrull5438]

Love it the video was awesome the music fit right in. It keeps popping up to high maybe make the track 2 inches longer. Or put a little wait up front

[@johnsneen424]

Frickin awesome!! Any chance of production on these for sale?

[@boondocker1219]

I have to have one that thing is unbelievable

[@Cedricbob]

Malade :D

[@thegodsquad9831]

Insaneeeeee I wish I knew how to make one

[@kylarbolding117]

That thing has more horsepower than my dirtbike probably😂

[@ahronsilver4999]

how much would it cost to get a prebuilt one

[@bryonforbes7620]

Money can buy happiness. Who ever say it can't u have just proved wrong dude. Love the vids, keep me coming they r awesome. Can u make a racesled? Just reply to this comment

[@Dwitter271]

Have you tried the weight distribution thing lately? Thought about weighting the outside etc for sidehilling? More control? Leaning? Etc?

[@Pascal_Robert--Rc_Creations]

I have not revisited the concept yet... but i will likely next season

[@nedflanders7652]

@@Pascal_Robert--Rc_Creations How about weighted skis?

[@josiahvaccaro3307]

Hey, I love your vids! How much would it cost to buy one of those?

[@wyattbailey3608]

how do you get these its crazy!

[@landonwiebe7815]

awesome machine man. you should figure out how to keep the skiis from being so floppy. real snowmobiles have rubber stoppers in there that let them move but keep them still in the air

[@Pascal_Robert--Rc_Creations]

I know, I know... I'm looking for a fix on that. Improvements never stop lol

[@landonwiebe7815]

@@Pascal_Robert--Rc_Creations right on

[@keyansharer6364]

I really want that rc snowmobile bro

[@jakefolke6344]

Where can I buy one

[@ken63rider]

Friendly recommendation... add some bump stops to the front spindles so the skis don’t flop around so much when they are in the air.

[@Pascal_Robert--Rc_Creations]

Its in the work, dont worry ;)

[@dextersxxxxlab]

I am not sure why but the performance of this machine seems to be far less compared to the blue one (sckotty?). This white one has insane power maybe but I did not see any good speed run or jump like the other does. Was that because of the snow conditions or just the size weight ratio? Only because of the choosen pieces you showed here made it seem like it will not get to "planing" position on top of the snow . So maybe I am totally wrong but from what I see here compared to the video's with the blue schotty that one will perform much better. It does ripp the slopes and jumps them and this white one just makes a 90 degree wheely without getting up to high speed. Maybe your next video will proof me totally wrong but the above just makes me see it that way. Keep it up. Love your work.

[@minnesotanative7836]

I want one so bad

[@ivanpincott9904]

Take the skis off and just see what it does like will it be able to wheelie still or just pile drive into the snow?

[@Pascal_Robert--Rc_Creations]

If the spindles and the a-arms are taken off too, it will rise back up. If not, it will likely drag it all for a while, but it should also be able to get back up. Its just stupid power

[@ivanpincott9904]

@@Pascal_Robert--Rc_Creations i know its crazy how much power it has but you should try something like that I think it would be cool if you made it like a boat with a track

[@landenempey4544]

How can i get one

[@bobhartwell3262]

That is so cool!!! Bigger might be better. Is it possible?

[@Pascal_Robert--Rc_Creations]

Probably, but let me tell you that its a lot bigger in person than on video haha! i'm already maxing out print volume on a lot of those parts...

[@mountainbikingwithmatt6310]

Do you have a rubber/TPU track on it?

[@Pascal_Robert--Rc_Creations]

Its a hybrid currently, but it had a hard pla for most of the clips and it never broke a piece. Pla tracks if well engeneered are really strong

[@christianerhard8875]

Wow I wish I was 1/5 of my size

[@henrysquests8590]

Hi are these for sale. Would really like one but I don’t have a 3d printer.

[@jenskristoffersson2086]

How to buy?

[@williamlarsen7554]

Hey man can i buy that thing i love snowmobiles i would love it

[@StaySmoked]

Is there anyway I could buy a snowmobile off of you? Or you make one and I buy it?

[@UppfinnarAXEL]

How long is the snowmobile?

[@Pascal_Robert--Rc_Creations]

760mm long

[@kaybro2324]

Shut up n take my money!

[@jean-francoisaubin]

I had to limit power on mine also track would explode

[@xsoftplastics7261]

We’re can I buy someone plz tell me

[@Pascal_Robert--Rc_Creations]

You can't, i make them from scratch

[@koltenhoffmann5256]

What motor is in it?

[@Pascal_Robert--Rc_Creations]

TP 3650, running on 6S

[@aidenwright661]

Is there a way u can make me one of these and I pay for it

[@brandonporter9947]

Me now realizing it’s a toy

[@yyclifestylegroup]

Dude can you build me one of these? I see you’re in Jasper. I’m in Calgary and would LOVE to have you build on for me.

[@Pascal_Robert--Rc_Creations]

I went to Jasper, but i dont live there haha! I live on the other side of Canada

[@yyclifestylegroup]

@@Pascal_Robert--Rc_Creations sooooo what do ya say? Wanna build me one of those beauty sleds 1-5 scale and a trailer to go with my SUB converted snow tracks???

[@dustinduke7028]

Ever tried to water skip one of your units???!!

[@Pascal_Robert--Rc_Creations]

Yes, i have a video about it too

[@Brian-nv1ww]

Do you build sleds for ppl?

[@Pascal_Robert--Rc_Creations]

I do, but it's extremely rare. i've made 16 so far.

[@tatkins1714]

@@Pascal_Robert--Rc_Creations how much would it take for you to build me one? I feel bad asking because so many people ask but I was Jw

[@zachsauer6038]

What electronics are you running?

[@Pascal_Robert--Rc_Creations]

I run a watercooled Mamba XLX, TP Power 3650 (also watercooled), futaba 7px (with telemetry sensors), and a futaba brushless servo (HSB-9381TH).

[@AFILalpha]

@@Pascal_Robert--Rc_Creations how does watercooled work in freezing temps?

[@charlesheckman3968]

Would you sell ?

[@mathroy2894]

Est-ce que le tunnel est plus cour

[@Pascal_Robert--Rc_Creations]

Non, tunnel est la longeure standard. C'est la longeure des palettes de la chenille qui fais la difference visuelle.

[@mathroy2894]

@@Pascal_Robert--Rc_Creations merci

[@ruffenought]

Sell a sled to me and my son. We live in sweden

[@toddchikigak6339]

I think id rather have this rc sled more than my sled. Ill ride this rc sled better 😂 this rc sled wheelies more than i ever can with my 600 ho etec 😂

[@Acestrex]

It would be better if we could play with it too! But no files, no playing for us.

[@Pascal_Robert--Rc_Creations]

Give it time, it's in the way. There's a lot more than meets the eye!