What is Concrete Slump?

[@Masterchif434]

i had 20 questions and this video answered all of them without having to go wild on an astm! thank you!

[@DecoCreteTV]

You're welcome! Thank you for the comment!!👍

[@modo203]

I love it. It's clear, concise and straight to the point. Thank you for sharing the knowledge!

[@rustyshackleford6693]

None of this was clear

[@johnhouston2591]

I've been studying for a building contractor license and this keeps coming up, thanks for explaining this!

[@jschulte3]

Um thanks

[@billycloudy9078]

Dude, my wife was right I should’ve watched these videos before I started training this week because Tuesday he’s rattling off all this shit and I had no idea what he was talking about but now when I go back today I got a better understanding. Thank you.

[@DecoCreteTV]

You are welcome!!! Thanks for watching!👍

[@MountainStrongConcrete]

This is great, I'll be using this to Help train out new dispatch employee's. Thank you for the Content!

[@DecoCreteTV]

You are welcome!! Thanks for watching Deco-Crete TV!

[@matthaddershow]

Have wondered about this in the past. Thanks for the explanation.

[@ahavamariusjr6494]

This is an explicit explanation. Thanks very much. God bless you. I'm a civil engineering student at polytechnic

[@DecoCreteTV]

You are welcome!! Thanks for watching and leaving the comment!

[@ontourforever]

Excellent demonstration!

[@DecoCreteTV]

Thanks for watching!!!!

[@sarahsmthrox]

Im new to the field, and Im glad you took the time, Thank you.

[@DecoCreteTV]

You're welcome!! Thank you for watching!

[@rossmayer2380]

Um if he says 'Um' one more time I swear 🤣

[@junglistmanner404]

I hate that I read this comment before I finished (the video) 🤣, but's he's very articulate and given that he's knows this much about concrete, there's a lot of f**ks and s**ts that normally roll of the tongue, that are definitely not being said. However, I still hate that I can't rewatch this and not hear "um" everytime he says it. Still a great video and as a new ready mix driver, this is 100% on my radar to help me slump up and not get railed by the pump operator or swamper or 19yr kid with an ego on site Edit: (the video)

[@leogolive]

Sounds like normal talking to me. He makes sense, he’s knowledgeable and enunciates clearly.

[@jb314stl]

I um read this um before I um watched it and UM was all I um heard

[@billycloudy9078]

🤣 yeah, he said it a lot!!

[@bryann3389]

@@jb314stl😂 right. Pet peeve right there haha

[@borsistephen]

Did anybody count the umms?

[@Joerichard9]

Great explanation!

[@DecoCreteTV]

Thanks Joe!

[@wsalt1221]

Great information sir. Appreciate you sharing your knowledge. Do you have any videos explaining water-cement ratio???

[@DecoCreteTV]

Thanks for the comment!!! We don't have any videos on that right now. We do plan on making one in the future though, stay tuned👍

[@rayertman]

Great video. So if I were to be screeding a 8 foot driveway by myself, would that be a good reason to increase my slump? Also, with a higher slump, would that generally increase the time between floating and finishing?

[@DecoCreteTV]

6in slump would be a good average for pouring a driveway. pouring a little tighter than that will increase strength but will be harder to work. pouring wetter than a 6in slump might make things easier but you will lose strength

[@hollywood7216]

Great video.. chill on the um

[@DecoCreteTV]

Thanks for the comment!! Jeff was around 15 ums per minute in this one🤣🤣

[@nickforeman757]

Hard to get an explanation like that from your superiors.

[@soorajullas8231]

Could you please tell more about the measurement we need to take? What cm is perfect?

[@DecoCreteTV]

The perfect slump is going to depend on the application, that's where the measurement comes in! measure from bottom of the bar to the center of the slumped concrete

[@CeeMoe1]

I just started working with Ozinga as a ready mix driver and i am having such a difficult timing fully understanding the conversions of slump on the PSI meter and calculating water to the mix. it has to "click" soon but i think if i had a chart or something maybe I'll understand.

[@DecoCreteTV]

Thanks for the comment!!! Hopefully, the new job is going well for you👍 We don't have much experience with the conversions on a psi meter, our background is more in pouring & finishing the concrete rather than the ready mix side. You might be able to find a chart online somewhere, or maybe someone at your company would have something for you. If not, my advice would be to talk to some of the drivers who've been driving for a while to see how they do the conversions. You could even make your own chart to follow based on their info. It could just be a handwritten thing to keep in your truck, or you could make it look nice and share it with the other new drivers. As for calculating how much water to add, a good rule of thumb is: 1 gallon of water per yard of concrete will bring the slump up 1 inch. So, say you have 6yds on your truck and it's at a 4-inch slump. The contractor says he's looking for a 6-inch slump, you would need to add 12 gallons of water. Hope this helps you out. Thanks for watching!!!

[@hehehe9618]

So adding more water to your concrete would increase the fluidity of the concrete, but then it would also lower the strength of the concrete?

[@DecoCreteTV]

Correct! 👍

[@williama.zinnikas7504]

Great explanation! Short, sweet, and to the point!! Thanks for making this helpful video!!!

[@waynedominguez1507]

THANKS FOR THE DETAILED EXPLANATION WHO DETERMINES THE FLOW REQUIRMMENT FOR A ICF OR ICCF ?

[@fish97826]

Technically according to ACI you're supposed to used the flipped cone to measure with the rounded rod on top although I suppose you can use the handle, it'll technically get you failed during examination, now in the field is different of course, no problem then

[@DecoCreteTV]

Thanks for the comment!

[@highonlifefishing4007]

So if i have 7 yards I’d need roughly about 7 gallons to bring up the sump one inch?

[@DecoCreteTV]

yes that is correct!

[@yoursola]

Thanks for this info! If I want to use an 80lb bag of Quikrete concrete mix, how much water would I need for a 2-3in slump?

[@DecoCreteTV]

Follow the instructions on the bag and mix accordingly!

[@thooks1234]

Not much. Not a good answer, but it's the right one. a 2-3 in slump is barely mixed.... if you are mixing in a portable mixer, that's one thing. In a wheel barrow or container, it will be tough to get it mixed by hand to a 3in slump. The best thing you can do is use as little water as possible, controlling dust as well as getting everything wet and mixed.

[@williamd.costigan3]

thanks for the video. I've been pouring small areas of concrete for years and I knew that a 6 vowed better than a 4. I also knew that add mixtures were stronger than adding water, But that official measuring cone was really cool. I'm totally serious when

[@DecoCreteTV]

Glad we were able to help!

[@lumal12]

is it safe to say that adding 10 gallons to 10 cy, the slump would increase by 1 inch ?

[@DecoCreteTV]

Yes that is correct!

[@kajekage9410]

a gallon... per YARD of concrete will change the slump that much?

[@DecoCreteTV]

yes it will👍

[@RitzWood32]

Every time he says “Um” take a drink 🍺

[@soggdogg]

Im wasted 30 seconds in.

[@FoamingPussy]

I'm dead of alcohol poisoning, and I was drinking O'Doul's.

[@fun782house]

Interesting thank you viscosity comes to mind

[@DecoCreteTV]

That would be a good way of looking at it. Thanks for the comment!

[@cluelesssam6975]

Thank you

[@muricanriot1376]

This was umm a very umm informative video. Thank you for umm taking the time to uhh explain.

[@decojeff1087]

Umm, thanks for watching!!! 👍

[@rossmayer2380]

Dude um that my um thought exactly.. um

[@TheBroknPezDispenser]

uh, you too!? uhmmmm.

[@transmitterguy478]

Cool, I never knew!

[@slowpoke96Z28]

so its like viscosity?

[@DecoCreteTV]

kinda yes

[@mikejustice1196]

You put the mud through a 1 1/2 sieve then filled the cone to 1/3 then you tamped the mud 25 times with the rod then you filled it to the 2/3 level and tamped it another 25 times then filled it again to the top and did another 25 right? Just wanted to make sure there’s no misinformation about this testing.

[@DecoCreteTV]

Thanks for the comment! I've never heard of or seen anyone put the mud through a sieve before a slump cone test. Other then that, yes, fill the cone 1/3 at a time and tamp 25 times with the rod after filling each section. Here's a link to an ACI slump test video and one to a PDF explaining the procedure. Thanks for watching Deco-Crete TV!!! kzbin.info/www/bejne/oHW4goJjl9Nrprc gatesconcreteforms.com/wp-content/uploads/2014/10/slumpTest1.pdf

[@LyricsKill300]

Great video! Very informative, the one critique I would say is too many umm's. Sticks out to me like a sore thumb and makes it hard to focus on the actual info. Other than that great video! Thank you for putting this out there

[@DecoCreteTV]

Thank you!!! Definitely a lot of um's in this one! Like 10 per minute😂😂

[@ickycrane684]

Great video. You explained what I was looking for in a perfect way. If I had a drink for every time you said “uhh” or “ummm” I would be dead drunk though. 😂 No offence though. Super great video. Thank you!

[@eliezeranpan8704]

Can you explain the calculation?

[@DecoCreteTV]

One gallon of water into one yard of concrete will bring the slump up one inch

[@CarlosGarcia-ls4hn]

Can a good, experienced driver, be able to tell the slump just by sight?

[@DecoCreteTV]

Thanks for the comment! An experienced driver can get the slump close by sight, but the only way to know exact slump is to use the test cone. Most residential jobs don't require an exact slump and no cone is needed. Thanks for watching Deco-Crete TV!!!

[@MrRob8349]

I now understand slump...and I'm not even a concrete guy. Thanks and great job

[@DecoCreteTV]

Thank you!!! Glad we could help!

[@Victor-fb2ik]

The um but other than that. Awesome video.

[@toxeyfrench]

I um wanted um to learn um about slump um thanks for um the video.

[@DecoCreteTV]

Um thanks for uh watching!

[@Mikefngarage]

I have seen for the first time on youtube a 100 slump.....it was so much water it would probably shrink 3 inches while drying. totally slumped out. like self leveling all these guys with rakes just standing there as the concrete flows like a mudslide.

[@DecoCreteTV]

😂😂

[@TM-tz9rr]

“I don’t know what to do with my hands” -Ricky Bobby

[@Joero21512]

Take a shot every time he says um 😅 🍻

[@Minecraftisbeast47]

I swear you said "Uh" or "Um" like a thousand times hahah

[@PNWNature]

Very helpful!! Didn't know there was a device for measuring slump; interesting 😊

[@wademartin8822]

Great video!

[@gumballer133]

You guys in Orrville Ohio?

[@DecoCreteTV]

Yes sir, 133 N Kohler Rd. Give us a visit!

[@gumballer133]

@@DecoCreteTV I will have to do that! Thanks

[@dumpstermaster104]

If i got a dime every time he says "um" id be doing pretty good financially 😂😂😂

[@DecoCreteTV]

Haha......he was around 15 ums per minute in this video!😂😂

[@dumpstermaster104]

@DecoCreteTV Thats 2 games of pool at the bar, lol

[@carlosquintanilla3859]

Fantastic video Sir!

[@anthony6298]

Hello. Getting ready to pour 5 yards over poly (garage floor). My order recipe will be L10/ 6.5 sacks. Because of the poly, I would like to use a water reducer to minimize bleed water as well as improve workability. Would like a 4" slump with a 6" or 7" workability. How would that be ordered? Or will the supplier know just what to do? Thank you for your videos!

[@DecoCreteTV]

That is a good way to go about it. Explain the situation to the ready-mix plant and request mid-range water reducer. Thanks for watching Anthony!

[@anthonyromayo6296]

Nice explaination

[@DecoCreteTV]

Thanks for watching Anthony!

[@gagegreen5969]

Awesome stuff.

[@DecoCreteTV]

Glad you enjoyed it, thanks for watching Gage!

[@dustinrobertkimball]

I wish I could count how many "um"s were in the video. Not sure I I can count that high? 🤔 but seriously man you obviously know your, um, shit and um, can actually speak really well. You articulate and get your point across amazingly well. 👏 Thank you!

[@stonetexdesign]

Great job

[@jasoningraham1393]

I think our local concrete plant needs to watch this we never get what we order always order 4 comes as a 6

[@CarlosGarcia-ls4hn]

Can you tell the slump right away?

[@randyaugustine2124]

What’s up? You tell me it’s your show

[@A.Hisham86]

In reality, I never use this test to predict how workable my concrete is, I just use my good workmanship standard. :)

[@ObeseIllegitimo]

12" slump

[@IronSharpensIronGym]

Educational video but this guy puts the “um” in slump lol.

[@Kingofthewildfrontierr]

Um

[@workscapeartisans4358]

Thanks but this video is not done by an engineer explaining how slumps are related to water/cement ratio, workability, permeability and target strengths of concrete using various methods of placements on site e.g. by skips, pumps, etc... not satisfied with this video

[@neilprete918]

Slump is only in specs so you can tell who doesn't know what they are talking about on the job

[@JD-xm3mg]

Ummm

[@hetfieldprophet]

Cheese charcuterie tray = poo with zero slump Taco Bell = 32" slump

[@brianlee2646]

No concrete worker has time to actually test the slump before a pour.

[@solo909]

I still have no idea what slump means when it comes to your concrete. 😂😂😂 wtf

[@neilprete918]

You would fail an aci test if you pulled a slump and measured off your handle.

[@thehalfnam4331]

Ummmm uhh great umm video uhh really ummm enjoyed umm it umm uh ummmmmmmm.

[@edmckenzie2196]

um sounds like um vegetable oil... dude covered everything i was looking for but the promo at the end made it all untrustworthy

[@jdberghone8411]

Umm and umm ah umm

[@igorthiago4927]

horrivel

[@donrobertson8170]

He snorted concrete before this video

[@DecoCreteTV]

😂😂😂

[@mikebyrnes615]

I lost interest with too many UMs. better videos out there.

[@brandontomczak2953]

Um ya um

[@dmj4489]

Um lol um

[@ricainiguez]

ummmm... what was i going to say..ummm...

[@TCG1979]

A #2 slump of shit.

[@frankradcliff660]

Brother work on your speech skills. Be consciousness of the word "um". It's an undesirable word when speaking or writing. Your content however is excellent.

[@DecoCreteTV]

Thanks for the feedback!!!

[@mdnt_ramble7]

Eh bad pull bad pull…

[@johngianoulis6968]

Great video!

[@DecoCreteTV]

Thanks for watching!!!