Deep VS. Coil over VS. Shallow cups

How to know which will work best for you? This will help you better understand the differences between them a and also pros and cons which will help you choose what will work best for you!
@hoppos_alex ig
@hoppos_inc
www.hopposonline.com
909 923 5553

[@FuhQ64]

Alex out here keeping the culture alive

[@lightbright2020]

Man keep these kind of videos coming. I swear people act like the lowrider scene is a secret society and they can’t tell you shit. Hoppos is A1

[@allthangsalias]

I’d love to see a complete installation of each with detailed explanation. Idc about the length of the video. I personally want in depth content and most guys don’t have it out there. For someone who TRULY wants to know what’s the ins and outs of the process and the elements I’d REALLY appreciate that. Even if it was sent to me personally via another medium/platform. I’d pay for that. Thanks for the content 🤝🏽🙏🏽🖤

[@750schimel]

You should consider if a dump video would be good for people? Different styles, how they work, manifolds, there is alot about them some people dont understand, myself included.

[@allthangsalias]

Agreed!

[@willyarias5846]

Sorry for the long Tex Mr Alex Great Videos 👍🏻

[@AllHail_PHARAOH]

Video Ideas: ·Different coil Tons ·1964 impala rearend ( c clamp/axle split issues) or other options for rearends. ·Trailing arms ( factory position vs. Extended trailing arms) ·Extended A'arms lengths explained ·Spendals ·Frame reinforcement ·Battery racks .Also if you have the body off frame with the frame ready for hydraulics. How do you setup/mock up a kit or test kit to raise and lower the frame for testing the lockup.

[@solomon9514]

Thank you for making these videos, your doing a great job, every little bit of advice helps, especially when it's free.

[@lewyv-3577]

Would like to see a video on removing front end springs to swap with another spring

[@splaudio1]

That cleared up a ton man , thanks for posting on that topic.

[@valentinsantiago277]

Keep up the great work. Love all these vids.

[@joeb9543]

Learned so much watching your videos keep up the excellent work Alex 👍

[@VictorOrtiz-hk8dn]

Love all your videos. Extremely helpful.

[@eze713]

Love this channel and the videos. Keep up the good work.

[@SittinLow]

My car used to Squeak like that song you mentioned Trillville-“Some Cut”! 😂 (REMIX G-Body Version) Hole saw fixed that! Nice video!

[@70impala10]

You cut the hole bigger?

[@SittinLow]

70 impala Ya cut it 2-1/4 to have some play. The previous owner cut it to small, rear cylinders were rubbing bad!

[@70impala10]

@@SittinLow ok yeah where my cylinders are in the back have a hole but not that wide I have coil over with power balls

[@luisjuarez9860]

😬🙈😂 Yea Triville " What it is ho o was up?" Yea my car did it to. How inverasing.. # let me hire the system.😬🙈😂

[@luisjuarez9860]

What is the purpose of the powerball? im not to familiar w its purpose. is it better with or with out. At the moment i do not have them.

[@ElCalin]

Just what I was looking for, you answered my long time questions. Thank you for your great video, looking forward to finish my 63 Riviera and have you guys to install a competition kit.

[@vidrioandsonstrucking2422]

another good video thanks alex

[@marshmellownapalm]

Thanks for the videos ! Very informative

[@leoroa5104]

I really appreciate every single one of your videos alex..thx for all the info man💯🙌

[@vilfainga7481]

Great video brother. Great explanation. Love how u keep it simple. Thank u alex

[@calaveracountycustoms2994]

Thx for the info I plan on getting my set up by the end of summer from u guys. This video helps alot

[@KingKongHasED]

Damn, this just answered everything I have been wondering. Great video

[@a.m.7191]

Good vid homie,them super deeps are bad ass,keep up the good work ,

[@aimforheaven]

I can't thank you enough Alex for all your videos and your help in the store. I was new to lowriders when I walked in to your store but with your help me and my little girl can hit the switches cruising the 63.. I will be back for some upgrades later on :) / Fredde (Sweden)

[@rvazquez4205]

Thanks bro u covered what I needed to know ... I was actually looking on the website so came here to see what actually I was picking thank u

[@daisyvigil8810]

Thank u bro 9n the videos u posting that is bad ass an that is what I call 4 the people ☝️✊✊👊🔥🔥NEW MEXICO SENDS THERE LOVE MY BOI

[@ShawnaElayne78]

Building my first frame off lowrider and your videos have been extremely helpful. I’m still trying to teach myself a lot and have a long way to go but thank you so much for this info 🙏🏼

[@vicbergins]

Thanks Alex for that video now I understand it now .

[@livingthelife7792]

Thanks homie for sharing all that

[@MTZMANAGEMENT]

You do very well explaining all the information. Highly appreciated

[@miked596]

Thank you for the great video. I learned a lot. 💘 when companies explain and demonstrate there products. 👏 👏 👏

[@Mark-zk7mv]

Keep it up brotha. Good work. Your bringing up the next generation of Lowriders / customers. Sharp business thinking 💯

[@mastergreen8492]

Needed that ✊🏾💯

[@TruhuslaMovement]

I appreciate your videos Alex. I plan on owning a lo lo one day. I want a 65 impala. All your info is so helpful. Thx

[@Albert88molina]

These videos are so tight thanks for doing them !! i’m debating on bagging or putting hydraulics on my wagon I want to be able to lay frame tho just don’t know how that works on hydraulics I’ve seen some cars on hydraulic don’t lay all the way out and then some do a video on that be cool in my book lol

[@kolohelau1185]

This is a solid company , always great answers and patience they do get busy but when you do catch them , they’ll fill you with all the info u need

[@crucialjp]

Loved the content, its information a lot of riders have been looking for. Can you do a video going over different gears/pump head sizes and the pros on cons of each?

[@Kam-Dios-]

Love the education!

[@brigido81]

Gracias Carnal couldn't explain better...

[@gabriellara4006]

You’re a great dude! Thank you for this video! Helped me gain knowledge on what I want... and I’m that guy you’re talking about, not knowing one thing about hydraulics. Again thank you!

[@barbarahernandez6264]

Thanks for doing these videos really helps for those that are new to hydraulics im learning my self this is my second car i own with hydros so still new to how everything works ive had a lowrider on bags so hydraulics and bags are different

[@miguelrodriguez4255]

Great advice brotha man dope videos

[@bigdaddy496]

Damn this was really helpful. When I used to see people 3 wheel back in the day I'd look at the cup and spring and I swear it was gonna let loose and shoot out.

[@toonse3683]

K I was on u web checking out the kits but i didn't understand the difference on the cups thanks this is very helpful

[@joseleon3868]

Thank you very much for the info bro I’ll be taking my car to your shop 👍

[@GOD2GINO4EVER]

I just watched your video , and i would like to know more about airbag systems;and I also know you're one of the biggest distributors of airbag systems in southern California 🔥🔥🔥🔥🔥

[@gilbertguzman531]

Good stuff....Good looking out very helpful information....its much appreciated i wanna start learning how to do my own installs i know how to weld and fabricate this is my next step right here thanks again

[@trentarbeau8753]

Another great video !!! Thanks for sharing your knowledge bro. I always thought that “coil over” was for imports, and probably we’re back in the day. But, I see the advantage of using the coil over, rather than the coil under. I’m use to coil under. Never had a problem whatsoever. But, I wasn’t hopping on my first car. It was lay and play. My 2nd car, was lay and play with 3 wheel motion. And used the coil under. Except no speed balls. So, I can definitely see the advantage of using coil over. Thanks for sharing your videos sir. Enjoying the knowledge bro.

[@618kustomz]

Great info. Thanks man!

[@macbutler814]

A very much needed video is fixing the pinion after you put drop mounts and lower and upper adjustable trailing arms on. Thanks loyal subscriber.

[@bennyleal443]

keep up the awsome work👍🏼👍🏼👍🏼videos are perfect

[@lamontarnold1612]

Lay & play is my style. Thanks for information

[@eddiespearsiii537]

GREAT VIDEO....JUST IN TIME BEFORE MY PURCHASE

[@Sup_Evox]

I’ve always wanted a 64 said I was gonna make a crown Vic but I bought my second car a e500 & I think I’ve waited long enough & I had the kit since I was like 15 time to install this vid helped a lot I’m goin hydrostuts all around

[@tihreekroyal7785]

I have a 62 impala build that I wanna start this will be my first low rider ever but I understand cars and these videos are helping me out a lot‼️ gonna do a 2 pump set up front and back with 2 square dumps I just wanna cruise but I do wanna jump the front

[@scootinonthru1]

Thank you for these videos I'm starting my first lowrider build and need all the information I can get!

[@james_crow2352]

Great videos bro. You should do a video if you haven't already about the difference in hopping with 8" cylinders in front vs 6" cylinders and understanding what's needed to avoid breaking ball joints. See it happens way too often. Thanks man!!

[@renesalcido7522]

VICTORVILLE is here.

[@MrTheHillfolk]

Seen HDCW around?

[@CarlosMartinez-bf8jf]

You should make a video of what the difference between each kit u have online are and what kit would fit the buyer , looking to buy a kit and berly learning ,your videos are forsure helping me learn a lot man keep up the videos 💯

[@adrsk8]

Very interesting ! Thank you ! Could you do a video about frame stress point ?

[@charlesguero2003]

Been subbed for a while. Good information. What about motors? Saco, presto lite, or china.. How bout gears? Those would make good videos.

[@chrisbeets2695]

thank you for clearing the water!

[@stanleymiranda5092]

Dam you guyzz are dope and hella COO to share the KNOWLEDGE

[@chevyconsumers9927]

Thanks for this info

[@rock____steady]

Great video brother 👍 I've always liked lowriders, Im 43 and finally going to build one. I no absolutely nothing about hydraulics lol. I've been in the trucking industry 23 years and could tell you anything you want to know about fixing a semi truck lol. Thank you for the videos.😎

[@chetmf]

Good video, I thought I knew it all lolz. Good stuff!!

[@bsock87]

Dope ass informative video! 👊🏻

[@carguysnewengland]

Alex can you do a video on hopping coils ? Like what’s best for each pump head, Voltage and car

[@timdaniel1812]

Just got my first lowrider and redoing everything I want done to it and this video is so helpful thank you….do you have a video on springs

[@Edrmz264]

Thxs for u information saludos desde seguín tx

[@filbertogarza7400]

I bought the deep cups for my 64 impala good deal.

[@babyhoghoeselo5098]

The song your talking about is called some cut. By trillville and scrappy the bed squeeking song

[@Muthafukpockets1317]

Cool shit yo 💯

[@keepondoubletruckin8466]

THANK YOU

[@lincolntilt9559]

Much appreciated, Now I'm hoping I can see you do a full install on a 1998-2011 lincoln Town Car...I'm still kinda confused on the rear coil over installation

[@supremet2620]

Super helpful man, and videos possible on installing adjustable trail arms and hiem joints on a g body?

[@monadansby5953]

Good explain to people know what deal with part

[@gilldaking]

I wish these videos were like this back in 2013 when I had my 84 sadandeville 2 pumps 6batt 4 switches kinda wish I never sold it

[@Adam_StillRollin_Gutierrez]

Can you please explain about Y Block or Piston pump. Love the videos

[@vicg826]

Good videos... Make a video of drop mounts and trailing arms

[@papatutti59]

Back in the 70's, my buddy would grind the coil spring flat and weld in the shallow cup.

[@rudyp.1158]

Can you do a video on lifting a 65 to 70 impala?..just going over the options for the rear ends and what not..since the early 60s are mostly talked about and shown!

[@kevinignacio4631]

could you do a video for trucks on what will work best other then air and what is the correct way to install hydraulics on trucks

[@pinkyhernandez1178]

Tbh I didnt know this info...but now I do!

[@javierflores4605]

Give it like before watching the video bro saz👊😎👍👍

[@johnroyce7509]

Can you do a video on what tonnes springs to use and recommend and why for example when using 4 pumps with 8 batteries in an Imparla. Your videos are great keep up the he good work 👍🏻

[@stevereeder6513]

Show a video on where to cut in the front end on a basic Gbody hyro build please possibly the rear as well

[@giovannogalindo8785]

Some cut by Trillville Alex stays coming through with the lowlow cheatcodes

[@woodywood5339]

Just started watching the channel regularly so maybe this has already been covered? How about a video on heavy duty 36 volt solenoids vs 12 volt solenoids in series ?

[@gilldaking]

I love these learning videos I'm always looking to expand my knowledge of lowlows much love from NEW MEXICO

[@alejandrososa2334]

From cruces brotha we need more lowriders down here

[@gilldaking]

@@alejandrososa2334 I'm from española we have a lot up here brother. I'm have fam down there good deal!

[@alejandrososa2334]

@@gilldaking nice thats the lowrider Capitol of the world!

[@bladenathan9763]

Trillville - some cut lol

[@valeriepalmarez3006]

Good video

[@josephfimbres6958]

Thank you Alex. This video was and is very helpful. I'm still deciding on what set-up I want. If it will be the F,B,C,C or the F,B,S,S. and what size cups will I need to upgrade to on an 01 Lincoln Town Car Cartier Terra

[@markrobyns9724]

First of all love all the videos, so thank you for that but my question is where’s the best place to mount the power balls? I have mine welded to the stock spring perches, is that best practice? Thank you

[@alexolivera7490]

Thanks for talking the Time to make videos.

[@alexhoppos909]

No problem brotha

[@shawnmartins169]

Thank you so much Alex I tell you that I am new to this game I am afraid to ask your questions at the cost of looking stupid I'm building my first lowrider I'm very very far north I'm not even in the US and there's no lowriders in my neighborhood that was Hydraulics anyways and I'd like to build my first one bought myself a 64 Impala and I will be buying everything I need off you guys thanks again keep up the good work

[@briank3799]

Do a video on chain bridging materials and what type bolts to use

[@javierortega7312]

Great info now what about going with whammy or two pump system

[@caddi70]

Things sure have changed since my first lowrider over 30 years ago. The old school method I'm sure you know. I used to weld pipe on the bottom of a regular cup because there was no such thing as deep cups quite yet. I can't tell you how many times I lost coil springs in the back. then it went to drilling a hole sideways to mount the piston in a bracket like a hyme joint and now we have top cups to put on the top side of a coil-over set up. you can even take a reverse cup and put it upside down weld to the spring pocket and it has a smoother place for the cylinder to rub against. too bad we didn't have videos like this back in the day. we just had to figure it out ourselves or hope there was a how-to in Lowrider magazine. Being from TN, I was the only one around with hydraulics, so I just used trial and error

[@JosephVSoto]

Can you do a video on how the drop down mounts work

[@udrgrndpyro5107]

What's going on Alex. lots of good info you putn out there for the lowrider community right on. I have one question, see I have a 97 Cadillac DeVille fwd. I'm looking fwd cylinders set up ?

[@SouthWestRidin]

GREAT VIDEOS!! May you do a video on how to install a setup in a front wheel drive FWD. We are working on putting hydraulics on a 2004 Cadillac Deville. Thank you Regards Spanky