DeepCool CH560 with DeepCool AK620 Digital

Find the case here: amzn.to/3Zgruod
Find the CPU cooler here: amzn.to/3ZejSmk
builds.gg/phre...

[@jonathanchalmers7844]

Thank you so much! I bought this case yesterday and I was so confused by the fan/argb wiring. I might actually try to build my pc now lol

[@jonathanchalmers7844]

28:17 I feel ya buddy

[@zedorda1337]

You could just install an expansion slot card with a USB C header on it for the front panel port. Why not put the the fan on the other side of the CPU cooler?

[@phreakwars]

Well sure I could have, but why would I when I had several brand new boards coming in? I use expansion cards mainly on upgrades, not on new builds. As for why not reverse the fan to the other side. One, Didn't feel like it, and two, sponsored product. Wanted to show the cooler being mounted the way it was intended.

[@docholliday773]

Sir how did you manage to get the anti-sag bracket to support the gpu. Mine doesnt touch it even if I set it all the way up.

[@phreakwars]

I unscrewed it from the case, flipped it upside down, and repositioned it to where it could be adjusted correctly.

[@docholliday773]

@phreakwars oh I feel so dumb now, thank you for your quick reply

[@xshowda]

Is it possible to mount a vertical gpu in this case?

[@phreakwars]

Yes, the PCIE brackets, when removed, create a huge gap that will fit a vertical mount kit pretty easy.

[@xshowda]

@@phreakwars Thank you for answering so fast! I just realised you already said that in the video when I rewatched it, so sorry for asking. Think I will order this case, my current is a BeQuiet Silent Base 802 and I really like it but vertical mount is so bad in that case there is literally no clearance between the glass side panel and the gpu so its running hot as hell.

[@MG0301]

Are the pre-installed was 3-pin or 4-pins pwm? Just curious

[@phreakwars]

4 pin PWM. I was actually quite surprised and impressed with the included fans. This build was one of a very very small few of the builds I have done where I actually kept the stock fans. I almost always take stock fans that come with cases and toss them in the trash for one reason or other. The fans that come with the CH560 though, are actually really nice.

[@MG0301]

@@phreakwars that’s impressive, but what’s bother me a little bit is that the length of PWM cabble is so short like super short 😂

[@phreakwars]

@@MG0301 that they are.

[@salimsadmanalvieee8965]

hey , i hope you are doing well , i have a question, so the psu clearance is 170mm in length, is it when the HDD bracket is shifted to one most left side? i want to buy CORSAIR HX750 with this , but the PSU has 180mm in legth , so i am thinking what to do, ill be buying tomorrow though, primary choice is to go with RM750e THANKS IN ADVANCE

[@phreakwars]

Good question, honestly do not recall for sure, but there was ample space inside. The HX750 should have no trouble fitting while still retaining the HDD cage. You should be just fine without having to shift the cage over.

[@salimsadmanalvieee8965]

@@phreakwars hi there, i am typing this while using the new deepcool casing just now, it is awesome , using the HX850 from corsair and i wanna thank you , from bottom of my heart and it fitted the way you said have a nice day +++++ rep

[@brandonramsaran8312]

how can i customize the lights to the colour i want on the argb fans do i connect it to the built in fan hub then motherboard then use a software to customize the colors or do i connect it to the psu using sata then customize the color i want from a software im not sure plz any help will be great im getting the case soon

[@phreakwars]

Fans to the hub then to the motherboard

[@brandonramsaran8312]

@@phreakwars i watched the video and to im guessing I'll need to buy a pwm fan controller to use argb since the stock fan controller isn't pwm?

[@phreakwars]

@@brandonramsaran8312 I'll be doing another video soon on the CH560 digital in white. I'll try to remember and cover that in the video.

[@brandonramsaran8312]

@@phreakwars Thank you so much I really wanted to know how to control and customize the color of the stock argb fans after we buy a pwm fan controller thanks in advance looking forward to the video

[@phreakwars]

@@brandonramsaran8312 What motherboard and cooler are you using? You may or may not need a PWM controller depending on available PWM ports on your board.

[@NGreedia]

Can the front fans be mounted from the inside of the case? I find it's difficult unscrewing/screwing in the fans from the outside of the case. Otherwise I prefer the removable fan bracket that the lancool ii mesh, lancool iii uses which is so much more convenient.

[@phreakwars]

Fan bracket is removable.

[@jamalhadipour2417]

Thanks for video I just have one question can we remove mesh from side door(in front of psu) ? I just like side glass alone without mesh panel can we? Or if remove glass is half and not cover all way to down

[@phreakwars]

No, can't remove it.

[@hellbraker]

My MB (A520-M) has just 2 slots (channels) for the fans apart from the CPU fan. I plan to have only the front triple fans and the rear exhaust fan. Will I be fine assuming that the 3 front fans have a single power connection?

[@phreakwars]

Yes, but I would not exceed more than 3. That's probably the amp draw limit (or so is claimed). To evenly divide that, hook the rear fan and top front intake fan on a splitter on one channel, and the middle and bottom front fans to another splitter on another channel. If you decide to add more fans later on, would go no more than 2 more additional fans on the board before using a powered fan hub.

[@albertovilela9015]

This DeepCool AK620 Digital is a OverKill to 7800X3D 70C° max on full stress 😊 my case Mars Gaming MCPRO Micro ATX 😅 is Big inside this case 😅 RGB off only show temperature ❤

[@baselgaming-d7d]

Nice