Deere 850D LC Girl Bucket vs. MAN BUCKET!

The Burnt one shows us loading differences between the girl bucket and the man bucket. The girl bucket is a 63" 4.5yd service bucket with a smooth edge. The man bucket is an 8yd 96" whaling bucket. Sadly the old 850 is a hair tired for swinging the big bucket in rock.

[@steverice7864]

kinda rough on the sides of the trucks there bud

[@johnnymurff4137]

I like this the dust and all

[@TheGto2006]

if you spill that much shit loading trucks where I work they'll pull your ass out of the excavator and you'll be holding a stop paddle flagging traffic

[@dbailey72371]

TheGto2006 Ya he's gonna fill the haul road full of rocks falling off the truck. He wouldn't last long at Wright bros.

[@derwolfistda]

Sorry "vantagetes". Professional loading looks completely different !

[@R1AUSSIERYDR]

Wow. You couldn't move that material off the side board at around the 7:00 mark. Bet the road grader man loves you.

[@dbailey72371]

R1AUSSIERYDR no doubt he's gonna fill up the haul road

[@jziegler1000]

I would be sacked if I Eva loaded like that, feel sorry for the bloke who has to clean up after you

[@todlindley8101]

Why'd that dumper stand at 6.00 and wait while youd a bucket full then pull into postion ???? jus wastin time !!!

[@dbailey72371]

Tod Lindley Ya I agree

[@ericboyles7208]

This dude on the Deere needs a lesson in filling dump trucks. smh

[@alwynhancock8446]

man bucket is best for keeping the sun out of you,re eye,s

[@jact6608]

he just needs to know how to use it properly and load the trucks more square on to the cab when releasing the product. god dam know it alls.

[@jimbass7867]

Why do I like watching this? I'm nuts!

[@ryanozbun7314]

drop those rocks a bit higher? it dents the beds....

[@johnnymurff4137]

Late comment I mean years late comment, but this is nice, I like seeing blasted or ripped stone or rock being loaded, the sound of the material hitting the truck bed. How many tons?? Keep up the good work

[@catbuildinginc]

i want to see rock truck chick

[@millertime8835]

No warning sound open coupler? No test on the attached bucket? Safety guy would be real impressed

[@Seveneleven44]

Too far away? You put half the material on the ground anyway.

[@vantagetes]

You mad we don't load little girly trucks? The name of the game around here is production so if you aren't spilling over the sides it isn't full and you're wasting everyone's time. If this was a tandem I might agree.

[@forkdriver500]

Pay attention....your spilling your bucket before you even get to the bowl of the rock truck...sheseh.

[@vantagetes]

Well thank you for being in the video. Shoot me an email at [e-mail]. I might have some DDnB swag I'll send your way for making the video as illustrious as it is.

[@vantagetes]

It's because we have chosen to make this the main channel instead of 2. As for what it means, it's some gay thing Jason had for gaming.

[@vantagetes]

If you check out a video we posted last december about how a hydraulic quick attach works you can see everything in action. It's on this very same machine and I actually go through what moves and what does what.

[@อาคมมากบุญ-ภ7ฐ]

ผ่านไม่

[@stevesmith-wc2gb]

U should make a video with that girl

[@dbailey72371]

you gotta learn how to load trucks because overloading them and spilling boulders off the side fills up haul roads and busts tires. Ya theirs room for improvement

[@vantagetes]

I like to hide those little stories in there to see if anyone picks up on it.

[@prisregil]

When i was working on dumpers,,, the guys on the excavators would shout at us through the radios when we were even half a tire with to far. And would often tell us to back up and realign. Good times...

[@BuddlerC]

+prisregil i think men who couldn't handle such a situation should been sent to a office job where they can put their keyboar in position !!! :P

[@BuddlerC]

Jake Witt thats for sure :D Im jobbing on backhoes very often and i think i got a little bit of experience ;)

[@69adrummer]

Someone from up in Canada tell me what exactly they are working on here? Seems like all these videos are just removing huge HUGE plots of soil. Is this a mine? Quarry? Can't be for a building, that would be HUGE!!

[@vantagetes]

I was willing to give her all the tip she could handle.

[@jact6608]

must have a shit load of rocks fall on ya haul road. ya don't seem to concerned about spillage I`d get me arse kicked where I work. I must say though, nice cut. I used a very similar bucket as the smaller one for cutting trenches in softer ground. if that were, I would gas cut that cutting edge off the teeth. actually I would through that little teaspoon away on that job. hey, arm, good luck...

[@farmboy26ful]

Well, not necessarily slower, but more directed.

[@mrbluenun]

Are you getting frustrated with your buckets? I have dug this kind of stuff by hand, so you should thank goodness you are using a shovel, it is hundreds of times quicker, all you have to do is to learn how to ease her through the hard bits, tender loving whispered in the joystick usually works, just as you are doing!

[@Drew6709]

Shouldn't you have pushed that big rock into the truck farther so it doesn't fall on someone or something?

[@69rd96]

That's one hell of a deep mass grave you are digging for the 2012 Apocalypse! Kepp up the "grave" work!

[@timtom7753]

I'm surprised you aren't loosening up the dirt while your waiting for the trucks. and those loads looked just fine to me!!! throw some more on there!! Lol

[@RLWMK3]

dislike = no option for bigger bucket LOL

[@onyourbikeuoldfart]

Don't like, because of the big black square in the line of sight.

[@YotaLizard]

Can you explain how the bucket is changed on-the-fly like that, as in what is the procedure, and what exactly happens hydraulically? Thanks!

[@Millsy.g]

This the airport tunnel? Also, I'm only slightly impressed that an 850 has been abused enough to be tired already!

[@vantagetes]

I'm loading 740's not Kenworths.

[@Graveltrucking]

That is one fuck of a cut you guys are working in. The tags for this video made me laugh.

[@Dudemieser]

Lets Dig could do this much better with no dust! Joking

[@norWISequipment]

When is there gonna be a vid of this so called rock truck chick?

[@RMosher11]

What exactly does vantageres mean anyway? I'v been wondering. Especially since you and Jason both use it.

[@vantagetes]

That's just a deep scratch.

[@vantagetes]

Who the fuck is Adam?

[@vantagetes]

Well yeah...someone has to.

[@kylewoods3737]

where exactly do you work in a mine plz let me know i want to get in to somthing like you thx bud!

[@boardingpass04]

cause hes reaching so far out

[@mrbluenun]

Hi, And thanks for the upload.

[@Mr42960]

Is that a stress crack near the bottom of the arm, or just a dark scratch?

[@forkdriver500]

It wasn't a criticism lol

[@vantagetes]

What trailer?

[@vantagetes]

Chris?

[@vantagetes]

hmmmmm

[@generationll]

Why is it hard with the 8 yard bucket Adam?

[@YotaLizard]

Thanks. By the way, whoever welded that plate across the rock teeth on the smaller bucked should be drawn and quartered by four D-11Rs! Great videos you guys make. Hoping to see you in a D7E some day.

[@fourtyfiveandalive7619]

YotaLizard 7e suck ran one on the Tuc road made flimsy crappy machine would rather be in a h

[@NZDIRT]

bout time for anew 850 you rekn haha

[@lukefox2150]

What exactly are u guys doing at this site ?

[@Theonetwo48]

lmao at your tags, i hope you tipped well

[@TheHairybaz]

whats rock truck chick doin tonight???

[@drachhart839]

crap at loading there a bit

[@TheWink17]

WHAT IS THE LONG CHANNEL BEING DUG FOR?

[@jeremylee99100]

cut the damn grader blade off the end

[@shortreedEarthworks]

is that a 4100 in the background

[@lukefox2150]

What r u guys doing at that job?

[@falouchelo]

''yiaah! i lost one''! XD lol

[@evadvalcourt]

is that at the airport ??

[@PittyEasy]

Good Job! :P I like it ..

[@JCarrollTV]

Longer vids are great

[@RMosher11]

Vantagetes* My bad

[@THUND3R63]

Nice operating!

[@welderboy14]

Not you.

[@clovakid]

Nice cut.

[@Tyee48]

Lmao

[@NFDL2]

Well first of all your running a girly machine

[@vantagetes]

Oh? So I guess you've got something more manly than a 190 000lb excavator?

[@vantagetes]

I've run 385's, 390's, 850's, 870's even Komatsu 800's. My personal first choice is still the 385/90 But If I'm digging around stuff I prefer the Deere 850. It's a solid competitor for the Cat's in that size class. For a GP machine to swing an 8yd bucket in rock like that says a lot about the machine. Especially when you look at the 385C LME on this channel that's only swinging a 7yd bucket.

[@samuelgibson8975]

Well i think no excavators are girly machines they are all strong and beastie ok maybe the really small ones lol

[@johndeerefarmer5993]

Hey don’t talk ab Deere John like that😂

[@jacquelinemacintosh5500]

SoConnFireImagesbb no pj8