Delicatastrophe New Bumpers Episode#3

[@ChrisIsOutside]

what a beast! that looks great! A lot of work welding that bumper but the result is awesome! I'm going to get an xrox one that bolts on for mine - I don;t know how to weld

[@outlaw86custom]

You could always learn to weld. Thanks for watching.

[@Kam-Kuth]

Excellent work of the master, it turned out perfectly and firmly. Hello from Russia. We have this car very much appreciated in the eastern part of the country: Primorye, Kamchatka, Sakhalin, East Siberia. I also have MMC Delica pe8w of Chamonix configuration. 👍🏻 I will be happy to subscribe to your channel. 😁

[@outlaw86custom]

It was a fun project, thanks for watching.

[@fatbass0561]

Welcome back, greetings from 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@outlaw86custom]

Thanks hopefully I'll be able to do some videos.

[@huutee1]

you make it LOOK easy...... i am sure it is not.. good job

[@chadmurray3621]

looks awesome, great work. have you thought of getting some air bags for the rear coil spring? I got some for mine because it was sagging a little with the extra weight. they are great, just pump it up to whatever height you want

[@outlaw86custom]

Yes I did put in air bags in the coil springs. Thanks for watching

[@JimBiddle.]

Do you have to worry about blocking off so much of the radiators?

[@outlaw86custom]

The air flow is more than enough I was worried at first but after driving in hot weather and over a mountain I haven't seen any problem. Thanks for watching.

[@JimBiddle.]

@@outlaw86custom That's great news, I'm building a winch bumper and was a bit worried about air flow, now I don't have to. Cheers!

[@Cody_Blue_Water]

Had did you take off the whole front? Having a hard time..

[@outlaw86custom]

Basically I didn't take the front end off I just loosened it up so I can get all the new metal into place and then welded that. Now that's not easy but it worked. Thanks for watching

[@NOMADSTHUNDER]

Hello sir. Do you have a lift in your van? Also, Would you post your wheel setup (rims brand and size as well as tire brand and size)? I have Delica 1997 (2nd series) tho. Thank you

[@outlaw86custom]

The van has a 2 in lift that I bought from IronMan plus I put on airbags in the rear.I bought tires and rims from Les Schwab's the tires are Open Road All Terrain 31x10.5 R 15 LT and rims are 15" steel not sure what brand they are it's what Les Schwab's sells. Thanks for watching.

[@NOMADSTHUNDER]

@@outlaw86custom Just purchased Ironman lift kit from them. Also, I am in the process of buying the bumpers from Coastal. Do you have a link for airbags? Thank you for sharing the info, though.

[@outlaw86custom]

@@NOMADSTHUNDER if you're going to install the iron Man lift kit and the bumpers I would put the airbags in at this point it's easier. I believe they were airlift 1000 series but not for sure here's a site where you can get them just measure the inside of your springs and your length and check with the company. www.sdtrucksprings.com/index.php?main_page=product_info&products_id=7072&gclid=Cj0KCQiAgOefBhDgARIsAMhqXA45WqIlKZfy3FWJkslMWIGPZv59P-zZKwGMgODMEpvNdod9glhKT4EaAhgcEALw_wcB

[@NOMADSTHUNDER]

Thank you sir. Is the link provided will fit the ironman coil spring?

[@outlaw86custom]

@@NOMADSTHUNDER I did a little more research on the delicacy site and I found these which everybody seems to be using and I think these are the ones I used. I can't find my receipt but I'm pretty sure these are the ones that fit since several other people have used. www.summitracing.com/int/parts/air-60769/overview

[@loucastsilas468]

Superb work Mr. Miyagi! What are the chances you would do this bumper build again? Looking to do the same to my L400 LWB :)

[@outlaw86custom]

First where are you located?

[@remarkymarkable]

Hi Mr. Miyagi, I love your videos. I wish I had half of your skills. Can you tell me what roof rack you put on your rig? I need to put one on mine. Thank you

[@outlaw86custom]

I got the roof rack mounts from iron Man and I made my own cross members and the rack is just a generic rack that we picked up from an off-road shop.

[@RenanRamos-eg7yt]

Sr puede compartir las medidas de las piezas

[@outlaw86custom]

This was a pre-cut kit from coastal off-road in British Columbia. So I don't know what measurements exactly I could give you. But thanks for watching

[@mdavis8430]

Dude, did you know the steering wheel is on the right side? What country are you in?

[@outlaw86custom]

USA and yes I know which side the steering wheel is....lol