Mitsubishi Delica Van Camper Conversion

  Рет қаралды 113,454

Droner Life

Droner Life

2 жыл бұрын

3D plans link:
mega.nz/file/GRwlSaQL#gO_CBaq...
This is how I have done my Mitsubishi Delica 1994 SWB High Roof Camper Conversion, it basically have:
- 220W Solar Panel
- 59L Water Tank
- 3" Camping Lights
- Secondary Battery
- Front Cabinet / 2 People Seat
- 18L Fridge
- Sofa / Bed
- Side Cabinet
- Mosquito Net
- Kitchen
- 3D Plans

Пікірлер: 141
@inthemakingadventurevlogs1006
@inthemakingadventurevlogs1006 Жыл бұрын
This is the best design of campervan conversion i've ever seen.
@RJ-pk7sn
@RJ-pk7sn 2 жыл бұрын
Nicest delica van build I've seen yet!
@fatfreddyscoat7564
@fatfreddyscoat7564 Жыл бұрын
Magnificent design and installation: great job!
@thedannyjenkinsman
@thedannyjenkinsman 2 жыл бұрын
Excellent design and use of space, well done to you and your wife.
@luttkericardo
@luttkericardo 2 жыл бұрын
No puedo dejar de ver este video, una de las mejores conversiones que e visto. Felicidades!
@michellestratford9753
@michellestratford9753 Жыл бұрын
This is so impressive! Very well done!!
@NewHaven203
@NewHaven203 2 жыл бұрын
The hardwork, creativeness, and ingenuity of this is insane! It is my dream to own one of these vans and I am amazed at your attention to detail. If I lived in Australia I would definitely try to buy it off you but I live in the states lol! This was inspiring, keep up the good work, these vans are slowly fading away!
@DronerLife
@DronerLife 2 жыл бұрын
Thats not a problem about not living here, i have uploaded the van 3D plans so you can download it and ask some local carpenter do build for you 😃
@simonhayes9569
@simonhayes9569 Жыл бұрын
@@DronerLife That's incredibly generous of you man thankyou. So many hours must have gone into planning this build. Getting a L400 in Vancouver soon and will be using your net.
@play4dc
@play4dc 4 ай бұрын
Literally my dream mini camper. Absolutely beautifully designed.
@richehoya
@richehoya Жыл бұрын
Beautiful Layout. Awesome job ❤
@NapoleonGARDENINGTV
@NapoleonGARDENINGTV Жыл бұрын
Very Nice! Amazing! The 3d plan is cool too!
@Matt-kt4ms
@Matt-kt4ms Жыл бұрын
Such a nice rebuild well done
@aravindpta1
@aravindpta1 2 жыл бұрын
Very impressive space management. Practical too. Some weight saving would have been good in the long run though. Good luck with your camping trips.
@suryadandes
@suryadandes Жыл бұрын
This is an optimal and functional design, very inspiring, thanks for the video, I wish you good health and success.
@Shauburbs
@Shauburbs 2 жыл бұрын
Thank you for uploading the plans! We just got our Delica a few weeks ago and think we are going to replicate your interior! Very nicely done.
@DronerLife
@DronerLife 2 жыл бұрын
Glad to be able to help!!
@andrewmclennan59
@andrewmclennan59 Жыл бұрын
@@DronerLife is it possible to get the plans from you? I am willing to pay for them, and the cutting list, many thanks
@goldcoastmartialarts
@goldcoastmartialarts 10 ай бұрын
Can't open the plans any ideas
@Hope_Faith_Strength
@Hope_Faith_Strength 2 жыл бұрын
Love it 😍 I’m doing my delica now
@evanl5299
@evanl5299 Ай бұрын
I started my build, and took advantage of your Sketchup file. My build will be pretty different but it's been very handy so far. Thanks man!!
@markb6218
@markb6218 2 жыл бұрын
Similar to an earlier comment - we have a SWB import on its way and think we will replicate your ideas, which look great. Thanks very much for uploading. Interested in the power setup - both the gear you used and also the placement of drilling the access hole in the roof.
@hankcuccina5260
@hankcuccina5260 Жыл бұрын
A great job and a very clever design.
@peterdietrich4041
@peterdietrich4041 2 жыл бұрын
You have a lot of good ideas.
@yanezhkevolec9743
@yanezhkevolec9743 2 жыл бұрын
Молодец классно сделал,желаю больше путешествовать в это не простое время.
@wallypolimeni
@wallypolimeni 2 ай бұрын
Buenísima!!! Felicitaciones hermano! Quedó tremenda. Me la juego por que sos brasilero, yo argentino! Abrazo grande!!!
@danwhiteman2529
@danwhiteman2529 2 ай бұрын
Awesome build Sir.
@Maximooforyou
@Maximooforyou 2 жыл бұрын
Really nice job man 👍
@slipperysebastian
@slipperysebastian Жыл бұрын
Amazing setup! I'm jealous!
@TheYellowjeff
@TheYellowjeff 2 жыл бұрын
awesome conversion mate!
@williamjohn1815
@williamjohn1815 2 ай бұрын
Very nice indeed the best so far.
@gabrielchagas2136
@gabrielchagas2136 Жыл бұрын
Muito youtuber poliglota esse jovem meliante
@KerryCorney
@KerryCorney 6 ай бұрын
Very cool! Thanks for sharing.
@zandzgallardo8404
@zandzgallardo8404 2 жыл бұрын
Awesome design!
@issataysissemali3203
@issataysissemali3203 2 жыл бұрын
Dude this is cool one
@remarkymarkable
@remarkymarkable 2 жыл бұрын
Nice job!
@petrimax
@petrimax Жыл бұрын
Cool work, we have all most same projekt to do Mitsubishi L300 Frankie -89 160000 km. Insaid 2m high, 2m vide ,and 4m long, open area now. There where moisture problems and we took all off and make New isolation and furitures. Ketchup software planing is great idea to solve coming mistakes. if we can do it ( learn it.) We must make all construction with thinner material.We must keep car in right shape for weight for safe limits for offisial regulations. Thank you and good summer drive!
@LifeTripped
@LifeTripped 2 жыл бұрын
Simple and Clean
@user-jy2dh6mz7t
@user-jy2dh6mz7t Жыл бұрын
Супер! Владею деликой седьмой год. В Кузбассе это всё бы почернело от сажи мигом!
@roimatamassold4730
@roimatamassold4730 2 жыл бұрын
very nice well done
@frodev728
@frodev728 2 жыл бұрын
This is a really nice design, although I think 16mm MDF adds a lot of unnecessary weight. 9mm ply would have been suitable for a lot of this and a saved a lot of weight.
@DronerLife
@DronerLife 2 жыл бұрын
Indeed. I only used mdf cause i was on a budget and theyre way cheaper than ply, otherwise id go for ply
@MrLg734
@MrLg734 Жыл бұрын
This is so amazing. I made some mockups after watching many videos and yours looks so close to what I have done! I'm wondering where to find the cooker that you have if you have time to share!
@DronerLife
@DronerLife Жыл бұрын
This is a spinifex stove, in australia we can find in anaconda: www.anacondastores.com/camping-hiking/camp-cooking/camping-stoves/spinifex-deluxe-2-burner-camp-stove/BP90041840-blue But im pretty sure in other countries you can find the same stove but under different brands and maybe colors
@mtwata
@mtwata 2 жыл бұрын
Mandou bem demais!
@user-zd7do3nl5m
@user-zd7do3nl5m 6 ай бұрын
Очень хороший обзор. Спасибо. Привет из России из Сибири. Приезжайте в гости
@livingworkingoutsidebox
@livingworkingoutsidebox 2 жыл бұрын
Great job 👏 👍
@waicungf3615
@waicungf3615 19 күн бұрын
nice work
@janisvapa5845
@janisvapa5845 2 жыл бұрын
nice... i still bild my delica.... full restoration...
@simonhayes9569
@simonhayes9569 Жыл бұрын
​ @Droner Life That's incredibly generous of you to supply the plans man thankyou. So many hours must have gone into planning this build. Getting a L400 in Vancouver soon and will be using your plans! It's got me so stoked! What was the cost of the MDF with cutting if you don't mind me asking? Presumably went MDF to save cost? Bit of extra weight would never phase the Delica beast ;)
@DronerLife
@DronerLife Жыл бұрын
Thanks simon! 😃 the 16mm white mdf sheets here in aussie were around $80 if im not wrong. Used 4 white sheets and 1 raw which is $60. Yeah mdf is cheaper if youre in a budget as was my case, but most preffet ply. The extra weight was never a issue for the 3.0 v6 😝. Please send some photos once you done with yours
@simonhayes9569
@simonhayes9569 Жыл бұрын
@@DronerLife Thanks for the info :) The cladded MDF looks great! What did you use for the counter top? And i'll for sure send some snaps!
@DronerLife
@DronerLife Жыл бұрын
@@simonhayes9569 for counter top i used some hardwood panels i bought at local hardware store
@Keepintouchplease
@Keepintouchplease Жыл бұрын
@@DronerLife Can I ask what your total cost was for this conversion? If it was in the video I missed it
@DronerLife
@DronerLife Жыл бұрын
@@Keepintouchplease as i recall it was around AUD2500
@lweleven3423
@lweleven3423 2 жыл бұрын
Nice job, thinking about buying a Delica , only thing holding me back is the lack of serviceable parts in the UK as they were never officially sold in the uk, suspension is also my worry as I feel once all that weight is in it may need up rated springs , tho I thought of mounting a roof top tent
@DronerLife
@DronerLife 2 жыл бұрын
Im pretty sure some parts are the same as pajero and maybe some from triton
@lweleven3423
@lweleven3423 2 жыл бұрын
@@DronerLife the 2.8 yes is the same , but there is so much more prop shafts drive shafts, trims that wear out , im guessing the 3.0 and 2.4 engines must be used in other vehicles , i still would like one lots of research to be done i think first but the delica does tick lots of boxes for a travel camper
@JimBiddle.
@JimBiddle. 2 жыл бұрын
@@lweleven3423 Might be an idea to join the club? I ended up with a Delica after doing a bike swop and am rebuilding it now. There are plenty of places to get spares and companies that specialise in the vans.
@Si_nengatcha
@Si_nengatcha Жыл бұрын
Great build and design. But Id need a place to store toilet or sth. Just for emergency
@victorbarbara6199
@victorbarbara6199 2 жыл бұрын
Cool!
@alexpage2616
@alexpage2616 2 жыл бұрын
Hey mate, great build and thanks so much for posting the plans up! I was wondering how you attached the battery box walls to the floor? Did you bracket and screw them in?
@DronerLife
@DronerLife 2 жыл бұрын
No man actually i attached the back of the battery box to the front cabinet
@brianrollins3245
@brianrollins3245 2 жыл бұрын
Really neat build and kudos for doing it in cardboard first to test. I could not figure sketchup. What are the internal heights you were working with in that model Delica to determine seat and bench heights?
@DronerLife
@DronerLife 2 жыл бұрын
I think the internal measure is around 1,2m not sure though. Thats the high roof version so might be different from others
@pipesurfer3922
@pipesurfer3922 2 жыл бұрын
Awesome
@user-wk5dw4ti5j
@user-wk5dw4ti5j 2 жыл бұрын
Супер 👌
@becmarsh5221
@becmarsh5221 8 ай бұрын
Thank you so much for showing your design. I have downloaded sketch up to check the plans but I'm unable to find the measurements on the boards. Please are you able to supply measurements? Cheers 😊
@JasondenHollander-qj5hp
@JasondenHollander-qj5hp 2 ай бұрын
Nice. I’m curious how you fold up the bed when you are on it?
@christopherwright2539
@christopherwright2539 Жыл бұрын
Great set up . Where can I view the plans and dimensions. 3d planning is beyond my graphic ability. Would love to do this with my van. Great job!!!
@DronerLife
@DronerLife Жыл бұрын
Hi christopher, the plans are available for download in the video description. I used the sw sketchup to visualize. I dont have the dimensions in a 2d plans, but sketchup isnt that hard to use though.
@cryptoasxtrading9229
@cryptoasxtrading9229 2 жыл бұрын
Looks good man, what slides did you use for the sofa bed?
@DronerLife
@DronerLife 2 жыл бұрын
No slides, only wooden sheet sliding above the cabinets, not sure but it might be in the 3d plans, you can check if you like
@maxdfeldman
@maxdfeldman 2 жыл бұрын
I've checked out your plans and they are great. I also love the kitchen design. Great work! It looks like I have the same van and I'm keen to make a similar design for the folding bench/bed. However, I wanted to get your thoughts on head clearance when sitting on the bed. It looks like the base of your bench is 36cm/14" and with the mattress it's 47cm/18.5" Does this provide enough head clearance when sitting in the van? I am not tall (172cm) and when I measured head clearance, I calculated that my bench could only be about 34cm/13.5" tall or else my head hits the top of the van in the centre part (there is more room in the crystal light roof section). I would love to hear your thoughts.
@DronerLife
@DronerLife 2 жыл бұрын
Hey Max glad to know you liked it! Yes the base is 36cm but i had to make a thinner mattress with 6cm (and the foam got to be bit harder too) so i could fit sitting on it. As you can see in 3:30 of the video, im sitting on the sofa (same height as when bed is set) but i can only fit on the side, as the centre part is too low for me, im 6'3. On the crystal light section i dont hit the head but am about to, maybe 1cm away. Please also mind that my Delica is high roof model, check if yours is the same
@maxdfeldman
@maxdfeldman 2 жыл бұрын
@@DronerLife awesome. I appreciate the feedback. I think I’ll make mine a bit lower for comfort. I know that I lose storage space below but I am OK with that. Yes, I have the high roof as well :) happy camping!
@DronerLife
@DronerLife 2 жыл бұрын
@@maxdfeldman that shouldnt be a problem, as the fridge isnt going under the seats, you can lower a bit and its fine =)
@nelsinhomotorhome
@nelsinhomotorhome 2 жыл бұрын
👏🏼👏🏼👏🏼👏🏼
@GuildMastersPH
@GuildMastersPH 2 жыл бұрын
yes yes i like it! how did you fix the wood to the metal? screw them directly to the metal?
@DronerLife
@DronerLife 2 жыл бұрын
Yes ive screwed into the metal and zinc sprayed and siliconed from underneath the car. However i wouldnt do it again, better try to figure out another solution
@420van01
@420van01 2 жыл бұрын
That panel looks really easy to steal. You should have welded it down.
@theblackandwhitefilmproject
@theblackandwhitefilmproject Жыл бұрын
Great Conversion! I am in New Zealand and the link to your amazing plan is not working. Mega doesn't seem to operate here. Do you have another link I could use? Really appreciate your help. Thanks and regards.
@DronerLife
@DronerLife Жыл бұрын
I tried now and seems to work in nz domain..but i can send you by email if you like
@ant8honey1
@ant8honey1 2 жыл бұрын
Looks fantastic! Where can I get that fly screen?
@DronerLife
@DronerLife 2 жыл бұрын
I bought from bunnings here in australia
@joeyfirriolo4800
@joeyfirriolo4800 2 ай бұрын
Not a good tha tank on the roof, or using mdf but very professional obviously your an engineer to design on cad and that shows so well done.
@janklingner2694
@janklingner2694 2 жыл бұрын
Very cool! But would it be legal to sit on the sofa-bed, while driving?
@DronerLife
@DronerLife 2 жыл бұрын
No really theyre wooden made and definitivelly not safe
@andrewmclennan59
@andrewmclennan59 Жыл бұрын
Is it possible to get a copy of the plans you used, we live in Perth and if you still have the van would love to see it in real life, cheers, great job
@DronerLife
@DronerLife Жыл бұрын
Unfortunatelly i dont have it anymore, but sure you can find the 3d plans on the link in the description
@joeyfirriolo4800
@joeyfirriolo4800 2 ай бұрын
I'm in Perth I can show you mine, not as professional but I was able to fit a 45l fridge and. 15l fridge also have way more space I can show you what I did
@wendynorton6082
@wendynorton6082 2 жыл бұрын
Hey mate, just wondering how you anchored the curtain tracks to the inside of your van. Did you screw into the body?
@DronerLife
@DronerLife 2 жыл бұрын
Sorry i dont know that, they were there when i bought it 😟
@gedhunter7574
@gedhunter7574 Жыл бұрын
This is a great design, struggling to download the plans. Are they still available ?
@DronerLife
@DronerLife Жыл бұрын
Yeah! Click on the link on the description and you will be able to download it 😉
@steven450
@steven450 Жыл бұрын
How do I view the plans? I downloaded mega but still not working
@steven450
@steven450 Жыл бұрын
Hey guys can someone explain for the people that don't know, how do you get the plans to be viewable?
@DronerLife
@DronerLife Жыл бұрын
Sorry the delay steven, you need to download the software sketchup to be able to view and edit the file
@zedrik77
@zedrik77 2 жыл бұрын
Awesome convertion! Would you sell the 3D diagrams?
@DronerLife
@DronerLife 2 жыл бұрын
Hi ive added one link on the description now 😎
@zedrik77
@zedrik77 2 жыл бұрын
@@DronerLife awesome mate! Cheers
@kacy544
@kacy544 2 жыл бұрын
@@DronerLife Are the measurements on the diagram? Also, do you think it would work with the low roof versions?
@DronerLife
@DronerLife 2 жыл бұрын
@@kacy544 yeah its a 3d plan so you might be able to get all the measurements from it. Honestly i dont think the exact same setup would work on low roof versions, unless you are shorter than 1,6m
@sameersasi6214
@sameersasi6214 Жыл бұрын
❤️💘❤️
@chrisoneil8459
@chrisoneil8459 Жыл бұрын
Is there a way to get or buy the plan with the dimensions? We tried extracting them from the program with the plans you uploaded but didn’t have any luck.
@DronerLife
@DronerLife Жыл бұрын
Its acailable for free, all you have to do is use the sw called "sketchup" so you can open it
@cefvelasco7200
@cefvelasco7200 2 жыл бұрын
nice build sir! where do u store your propane gas?
@DronerLife
@DronerLife 2 жыл бұрын
Inside the storage on the right drawer
@kyfisher3662
@kyfisher3662 4 ай бұрын
do you know how many Liters cargo space it has? i can find this for every car online except the delica
@pogruzinsku926
@pogruzinsku926 2 ай бұрын
great project, congratulations! Could I contact you? I live in Europe in Georgia, I'm just starting to build my house and I would like to ask you for a consultation
@chrisrea7347
@chrisrea7347 2 жыл бұрын
Hi, another question, do you find the bed width at 1100mm is okay for 2 or do you use just for one. The length at 1900mm is fine. Many thanks.
@DronerLife
@DronerLife 2 жыл бұрын
Hi, i used to sleep with my wife and it was ok, we didnt spend more than two weeks in a row though. If you cant sleep in a narrow place maybe you should consider widering the bed, but mind that the side cabinet will be smaller and the fridge will probably not fit
@pierredepretz8463
@pierredepretz8463 2 жыл бұрын
Hi @@DronerLife , what do you think would be the maximum width? (I consider this camper but we're picky about the bed size, the wider, the better :))
@DronerLife
@DronerLife 2 жыл бұрын
@@pierredepretz8463 ive checked the 3d plans and if you get rid of the side cabinet you can go up to 1.4m wide
@monicaarana5725
@monicaarana5725 9 ай бұрын
Do you still have the plans available? They don’t seem to be opening any more :(
@Aviationrcfpv
@Aviationrcfpv 2 жыл бұрын
The solar pannle specs are definitely ebay enhanced
@DronerLife
@DronerLife 2 жыл бұрын
Thats true i checked after and it is 180w i believe 😅
@user-hb2wk9ti6b
@user-hb2wk9ti6b 3 ай бұрын
Hey! Can you link to that hitch that he's running?
@SheahanClan
@SheahanClan 11 ай бұрын
What has been your experience with the clear roof panels? Any leaking? Thanks!
@DronerLife
@DronerLife 11 ай бұрын
No leaks at all, even the shades were working pretty good
@NOMADSTHUNDER
@NOMADSTHUNDER Жыл бұрын
Hello. I also have Delica here in the US. Your setup is invcredie. Would you share your blueprints so I can build the same in my van? Thanks
@DronerLife
@DronerLife Жыл бұрын
The link for download is in description. Tried few minutes ago and worked, can you try downloading from the link? If doesnt work pls let me know i will upload again 😉
@N1Norm
@N1Norm Жыл бұрын
Nice build. Would you be willing to assist in adapting your 3D drawings to a L300 Delica? I’m not much of a CAD person myself. Would be glad to compensate you for your time
@DronerLife
@DronerLife Жыл бұрын
Send me an email so we can talk through 😉
@N1Norm
@N1Norm Жыл бұрын
@@DronerLife thanks for the reply. What is a good email to contact?
@DronerLife
@DronerLife Жыл бұрын
@@N1Norm brunofranchi@gmail.com
@ItsKirstyGreene
@ItsKirstyGreene Жыл бұрын
Are you able to reshape your 3D plans if you still have them? I can’t get Mega to correctly open the file linked in the description
@DronerLife
@DronerLife Жыл бұрын
Hi i think is renewed now, could you try the link again?
@chrisrea7347
@chrisrea7347 2 жыл бұрын
Hi , I downloaded your 3D link but can't open the file. What app did you use to create it?
@DronerLife
@DronerLife 2 жыл бұрын
Hi chris, it was made in sketchup, google it you should be able to download a free version
@andrewmclennan59
@andrewmclennan59 Жыл бұрын
Hi, is this based on a regular wheel base De,ica?
@DronerLife
@DronerLife Жыл бұрын
Thats a short wheel base and high roof
@DustyRobertson
@DustyRobertson 2 жыл бұрын
Can you please share the 3d model! I have the exact same model as you and would like to start designing
@DronerLife
@DronerLife 2 жыл бұрын
Hi ive added one link on the description now 😎
@Hope_Faith_Strength
@Hope_Faith_Strength 2 жыл бұрын
@@DronerLife thank you 🙏🏼
@kacy544
@kacy544 2 жыл бұрын
Is this a High Roof? Or Regular SWB/Roof?
@DronerLife
@DronerLife 2 жыл бұрын
Thats the high roof, guess cant fit a seated person in a low roof though
@rebeccacalo5785
@rebeccacalo5785 11 ай бұрын
how much did it cost you total? (not counting the van ofc)
@DronerLife
@DronerLife 11 ай бұрын
Cant remember exactly but think it was around 2-4k for materials not including workmanship
@mpianayan4260
@mpianayan4260 2 жыл бұрын
Where is toilet
@DronerLife
@DronerLife 2 жыл бұрын
No toilet inside, i used to have a shower tent to be assembled outside
Small Off-Road Camper Van Conversion Using Aluminium
21:17
Thomas Heaton
Рет қаралды 1,1 МЛН
My Self Build Camper Van 1 Year Later
14:27
Thomas Heaton
Рет қаралды 274 М.
WHO DO I LOVE MOST?
00:22
dednahype
Рет қаралды 49 МЛН
Каха инструкция по шашлыку
01:00
К-Media
Рет қаралды 8 МЛН
How to bring sweets anywhere 😋🍰🍫
00:32
TooTool
Рет қаралды 48 МЛН
Mitsubishi Delica Camper Van Conversion part 1
12:54
Kris Harbour Natural Building
Рет қаралды 133 М.
I think I like Vanlife - Cape York in a Delica
33:18
Fire to Fork
Рет қаралды 71 М.
Toyota Sienna 2008 camper van build
13:43
Sarah Richmond
Рет қаралды 110 М.
WATCH THIS BEFORE BUYING A MITSUBISHI DELICA! (L300 & L400)
15:52
Mitsubishi Delica Campervan: Floor Installation
10:20
iAligator
Рет қаралды 23 М.
MITSUBISHI DELICA l400 SPACE GEAR - IN ACTION
30:03
NINJA STYLE
Рет қаралды 119 М.
Could This Be My Next Van? | Camping & Photography in a Delica D5
26:16