Delta Faucet Magnetic Ring Replacement (9192T-DST)

[@Colorado-Tinkering]

Thank you for your time and effort making and publishing the video. One small correction: the old ring can not be cleaned up and potentially reused because it is the iron magnet in the damaged (from the hose rubbing against it) magnet ring that is the source of all that rust. By the way, the first time I had this happen on my kitchen faucet, Delta sent me a whole new faucet spout and a new wand hose assembly. Someone must have started doing the math and realized that a little magnet replacement kit would be much cheaper for Delta to send out.

[@lesliem825]

Thank you very much for the instructions... I called Delta ordered the part... they sent it for free... got it today… The faucet doesn't attach the same as shown here but I was able to unscrew it with pliers and it literally took 30 seconds to fix... It's been hanging and broken like this for several years but I did not know how to fix it.. Glad I finally looked it up..

[@johnschnepf2858]

Thank you - this helped a ton! Delta is sending out the parts necessary to fix it for free.

[@patsharp555]

OMG Delta needs to reimburse you for this video, mine failed after one year. Thank you for saving me the money for replacing my new faucet

[@DaxM]

Glad it helped. 👍

[@suyashagrawal7298]

@@DaxM Last year, I bought a brand new Delta faucet for over $500 because of this exact problem, and then I paid a plumber over $400 to install it. Imagine my horror when the exact same problem occurred all over again. Thanks for the video! Hopefully, Delta will send the replacement parts. This is definitely a design defect...

[@KH-vi9tu]

Mine is rusted and bulging and it’s been 8 months. What a terrible design for a $600 faucet.

[@xEyeson]

Thank you for your walkthrough. This save me a lot of time of reading the instructions and I was able to fix this in less than a minute. One thing to add is also when you call Delta to ask for a replacement nozzle sprayer as well. It will save you a lot of time then sitting there cleaning with vinegar.

[@MegaAlex010101]

Thank you great job! best video ever online for this job!

[@hillcountrygarage]

Wish I had known about the lifetime warranty. I ordered mine from the Delta website and they arrive in a couple of days. Three magnets and the tool cost $45 dollars and then there is shipping added on. Anyway, glad to have them and appreciate this very helpful video on how to remove and replace them. God bless.

[@tiptom]

Thank you for this video!! I was about to try and buy and fit washers not realizing the magnetic parts. Giving the Delta # greatly appreciated, they are a good company and as you said will send warranty replacement parts. I'm bookmarking your video so I will follow your advice on the install. You saved me a lot of time and I'm appreciative.

[@jodicobb1]

Thank You SO MUCH! I was struggling with this until I found your video. The vinegar solution was perfect too.

[@DaxM]

Awesome. Glad it helped you. Thanks for watching

[@camiestockhausen2070]

Excellent! Thank you! (To the folks who can't figure out how to get the faucet off, get in there and play with it for goodness sakes, it's pretty easy.)

[@sonnysangemino9362]

Great video! Thank you! For those trying to see how to remove the faucet head. On the retaining collar there is a pressure button, press this and unscrew. He shows it nicely at the end of the video. Another tip. Mine was so corroded I thought I had the whole piece out but the retaining clip was still fixed in place. Could not figure out why the install end of the tool would not fit. Delta sent me the magnet kit including tool and a brand new faucet head.

[@terryhess2715]

Thanks you for a PERFECT instruction video. It solved my exact problem I have.

[@lorettaweierich9021]

Thank you so so much. Your video was so helpful. Thanks again because now I don't have to hire a plumber.

[@three03bike]

Awesome! Thank you! Glad I don't need to pay $50+ for a new magnet!.

[@billbristol8886]

If you tie a string around the hose, you can prevent the hose from falling down making reassembly easier. Thin string is easy to finagle with the installation tool.

[@Lysander-Spooner]

This is the easiest repair ever. Took less than 5 minutes. I did not want to get under sink to push hose back uo so I used hemostat to grab it. It is just inside the metal tube so easy to grab it.

[@sjacuk65]

Great video! Thanks. I called Delta and they sent me out the set of 3 magnets and tool free of charge. I had an issue with the solenoid a while back (low pressure) and that was a freebee as well. My magnet was a bit of a challenge getting out. Didn't come out nearly as easily as yours. After about 10 minutes of pulling it finally gave way. Delta has excellent customer service and stands behind their products.

[@DaxM]

They certainly do. Glad the video helped.

[@phatbootyluvr]

Thank you. After reading over Delta's terse instructions, a light bulb went off with the idea that someone must have done a video of the magnet being successfully replaced. Your video cleared up a lot of my questions and confusion. I removed and replaced the magnet in less than 5 minutes. Your helpful video is greatly appreciated. Thank you again.

[@mikealleman2314]

Great video. In focus, adequate lighting. I know exactly what to expect.

[@brandtcj1]

thanks for taking the time to produce a video on this. Saved me some time and $$.

[@DaxM]

Glad it helped

[@deborahortiz3229]

Thanks for this video. I have the instructions but geez I'm confused! You made it easy to understand

[@roanwilliams4255]

Thank you so much for making this video. I was about to shell out some serious cash to buy a new faucet head.

[@sechaimd]

Thank you for an excellent video! And Delta remains as helpful and efficient as you stated. Everything worked like a charm!

[@DaxM]

Glad to hear it worked out for you.

[@NA-si8mo]

Although I snapped the small tab off when reinstalling the magnet, it's still okay and I have two extra anyway. Thanks for the easy to follow instructions and yes Delta rep I had ( Derika) was great to deal with!

[@DaxM]

Glad it worked.

[@alexstavros]

Excellent. Thanks for making the video and providing the Delta number .

[@DaxM]

No problem. Hope it helps. 👍

[@jtoo6060]

Thanks for your excellent video. My Delta Kitchen Faucet magnet rusted out after only 3 years. I hope these replacement magnets last longer. I was hoping you would show how to remove the nozzle head. Delta is great about sending the replacement kit.

[@luvmypack]

Great and extremely helpful video!! Thank you so much!

[@mariacadientepolt4955]

Thank you for the video. Bought a Delta and had installed 2 days ago. the magnet is loose and comes off and stays connected to the sprayer. My son who is 16 said the magnet doesnt work. By viewing your video it looks like the magnet replacement piece may have cracked at the "clip" as I don't see a lip that would help it stay and click in place on the base hence it is coming off easily. delta is sending me a Magna Tote replacement kit. I do hope they send me the Orange tool you used in your video. Thank you again great video. would have saved eme from removing and returning to Lowe's and also needing to pay plumber again!

[@DaxM]

Glad the video helped

[@alimkassim]

Thanks for the video!

[@charlieandgavintube754]

Thank you!

[@troywayne8759]

Great video! Thank you!

[@howard6177]

I have a late model delta faucet of this design and less than a year old with this problem. Delta sent me the kit and I repaired it. The kit even has extra magnets which I assume they anticipate it's use. I love the functionality of the faucet especially with the Touch2O feature. However, why can't they make the magnet impervious to a bit of water?

[@vicschneider8167]

Thank you, this video was very helpful.

[@DaxM]

Glad it helped.

[@jimanderson2518]

Thanks did they send the tool as part of the kit....I kept all the parts from original and this tool was not in the kit .

[@ArvolBrown]

I bought a replacement Nozzle sprayer and replace magnetic ring .. The replacement nozzle was not magnetized or magnetic would hold it... Do you need a stainless steel sprayer with the Magnetic docking ... ?? Think the sprayer I got way a high grade polished nickel plastic ..?

[@patriot7633]

Good Job

[@ASlightlyBetterWife]

Super helpful! Thank you!

[@sandiremson8561]

15000 views. There must have been a manufacturing defect at Delta. They offered me 70% off a new one or the parts to repair. You didn't show unscrewing the faucet head. Is that easy simple to do? thx

[@DaxM]

It’s easy to do. Just press down the circular tab and keep it depressed while unscrewing.

[@user-qr7dl5yr7r]

Thank you

[@DaxM]

Thanks for watching. Hope it helped.

[@doughope761]

not very helpful, sorry. you skip detaching the faucet from hose and the Delta instructions show twisting it in a picture with no explanation. Ours is not detaching. thanks anyway

[@jayr1935]

Great video but it doesn’t “just click in” - easy to break the small black tab while installing

[@duckiez71]

I've just snapped 2 of them 🙈 I push in an angle but it won't match with the hole. Any tips?

[@duckiez71]

Guys, here's a trick, use soap to get it to glide in!

[@WillBeecher]

That was good video but you didn't show how to get the head off.

[@mainiariin4800]

That's what I needed as well. Good video, though, and I was able to figure it out by watching how he reinstalled the head.

[@rogwheel]

Delta will send you ALL the parts needed including a new wand assembly. Might as well replace it while you're replacing the magnet saving the need to clean the old one. Just throw it away!

[@luiscabido1532]

You didn't show how to remove the head.

[@KH-vi9tu]

Mine is rusted and bulging and it’s been 8 months. What a terrible design for a $600 faucet.