Delta PLC basics | link function in ISPSoft HWConfig, how to use COMMGR communication driver

[@whiteroseqq95]

I will have to say this is almost like a diamond in the desert. Thanks for posting these quality content. I cannot express how grateful I am after finding your videos.

[@plcgoods]

Glad you enjoy it!

[@dalematthews8748]

Fantastic videos, very informative and useful 👍🏿

[@plcgoods]

You welcome thanks for comment 😀

[@valentinenciu7571]

Like good to see you back.see you.bye.

[@plcgoods]

Glad you like it

[@plcgoods]

Likewise, I was preparing some lessons for Delta PLC, so far, i have posted a few of them, I do not know if you have check them out or not. please take a look at them and give me your opinion!

[@Nerfzisback]

@@plcgoods hey man , do you have any idea how to configure the communication module as00scm?

[@plcgoods]

@@Nerfzisback Thanks for checking the channel, about the module, Sorry I have not worked with this module, no idea how its parameters should be set

[@plcgoods]

@@Nerfzisback I do not have any idea what that module even is, please check its configuration data on the internet and limit your questions on what software or hardware you are introduced to on each video lesson, thanks for checking the channel

[@szas6754]

Thank you so much for this absolutely Great explanation

[@plcgoods]

Glad it was helpful!👍👍

[@kmrshashank57]

very well explained thanks 😀

[@plcgoods]

Glad it was helpful!

[@sjadha2]

Excellent videos. much more informative. Thank you.

[@plcgoods]

Thanks for the compliments and checking the channel

[@plcgoods]

Thanks for checking out the channel and its content is useful to you

[@RaviShankar-kk8ld]

Thank you sir brilliant video

[@plcgoods]

Glad you liked it, thanks for your comment!

[@vazgen6672]

Thank you for your great content! Please can you explain about series of plc at 8:55? Why did you pointed at AH5x0 series and said that you don't have this item (HWCONFIG)? While this item was at left part of you screen? I'm a little bit confused! 😅

[@plcgoods]

Hi there, As you know, before starting any project, we should select our PLC type. My PLC type is “DVP20SX2”. If I select it as my PLC type in ISPsoft, then I won’t have “HWCONFIG” item on the left side of ISPSoft screen, because this PLC doesn’t need to be configured. But if I select a PLC from “AH5x0” series (like the video), then the “HWCONFIG” item will appear on the left side. Because we need this item to configure this type of PLC. For example we need to determine extended modules or their addresses.

[@MikeMaynard-n2h]

Hey There, folling along for vitual PLC setup, done everything as you have laid out, but getting this error on Download... "The device returned an error when processing the request (error code 16#7002 - The CPU module does not support the function), please check the device." Same PLC, same settings... Any advice would be greatly appreciated!

[@plcgoods]

I always try to show all steps of programming clearly, Now you are saying the same device, the same software... But you are getting an error code, well what can i say?

[@MikeMaynard-n2h]

@@plcgoods Thanks for the response, I still seem to be getting a new error, which now states - Incorrect Area Code... Anyways, thank you for the videos! I don't think it has anything to do with your process, its more likely a config setting on this old PLC I am using.

[@metatube7817]

@@plcgoods I am getting the same error even after following every step with great caution. It will be a great help on top of what you have already done to make the viewer understand why this error appears. Thanks in advance.

[@udaykulkarni8989]

Thanks and good day

[@plcgoods]

Have a nice day thanks for your comment and glad to see you found the channel content useful to you!

[@vasilyaet6766]

Thank you for teaching us many things. I have a question, how can connect third party equipment via rs485 or rs232? I couldn't find an option in hwconfig.Thank you.

[@plcgoods]

Hi there, If you search on the internet, you can see that RS-232 is used to connect only 2 devices. Also, a maximum of 32 devices can be connected to a standard RS485. So, you need to use RS485 to connect 3 devices together. Because each device has its specific settings, so I can not tell you the settings that you need. I recommend reading the user manual of your devices or asking your question from your product's vendor.

[@vasilyaet6766]

​@@plcgoods Thank you for the response.

[@ayhamshbat2733]

Thx you for the content , at the 7:00 minute when u choose to use force for inputs to be actived I tried to choose "set on" for inputs then a popup message appeared " communication error ( function not support) , why?

[@plcgoodsmentor9223]

Hi there, Probably your computer is not connected to your PLC. So, check the connection settings and download your program again, to ensure the connection settings between the PLC and your computer are correct. Also, the current program inside ISPsoft software and the PLC program must be the same. Then activate the online mode.

[@plcgoods]

was the response from the PLC goods mentor useful to you?

[@ayhamshbat2733]

@@plcgoods thx u for following my reply 🙂 I really appreciate it alot , and for u question indeed not really because I am using virtual plc so there's no real connection my computer and plc only by COMMGR, and also in u vid u mentioned that there's no connection between the inputs and the feed line

[@abhijeettupe7193]

​@@ayhamshbat2733 did ur problem solve i am facing problem like it says can't convert temporary files when compiled

[@amirparsa2576]

perfect

[@plcgoods]

Great thanks for your comment💚💚

[@minsinyaratamov669]

Thanks for very interesting video!!! By the way, does anyone know how to downgrade HWConfig to version 3? installer gets new version from repository, 4.07, if I remember right...

[@plcgoods]

Hi there, I don't know how you can solve your problem.

[@ameerabbas1996]

Thank you. Jazakallah. Good basic lesson about communications between software and plc hardware, virtual plc. Please tell us what are the differences between different models of delta plc such as max. I/O can be connected, processor speed, comm.types, ? Why we need these much different models?

[@plcgoods]

Delta has produced different models of PLCs to fit customers needs best. You might need to use a PLC to monitor a very simple task in your machine such as controlling a few pushbuttons and Turing on /off a few relays, so you need to buy a PLC that has bunch of analog and digital IOs. some delta PLCs are built as big as a cigarette packet and very inexpensive! with a very limited number of IOs.

[@whatvideo3107]

thank you so much brother, do you have affiliate link for purchase of delta or other PLC products?

[@plcgoods]

Sorry, I am not in the business of selling any hardware!

[@fernandovicente8416]

Muito bom.ok obrigado

[@plcgoods]

You welcome thanks for the comment, glad the content is useful for you!👍👍

[@anwarulhaqsaleemi5106]

Dear Sir, please upload a new video using Delta HMI 107 and delta compact PLC , transistorized out put module and TC module for thermocouples K-type and J-type( Selectable ) to control heater of a plastic mold. selectable SV temperatures from HMI and monitor PV temperatures of mold heaters on HMI thanks a lot

[@plcgoods]

I have developed 26 videos related to programming DELTA PLC in which some of them show how to interface analog equipments to analog port of a DELTA PLC. Please check out those videos. Right now I do not have any video related to an application you mentioned.

[@davo0593]

Hi. When I try to open the communication settings it shows a message "Driver info file isn't found. Check the driver info Path". If You could help me please.

[@plcgoodsteam8934]

Hi there, I don't know what your problem is. Note that you need to install COMMGR software as well as the ISPSoft.

[@plcgoods]

Thanks for checking out the channel!

[@kili8704]

There is nothing in my com port option of driver properties . Do I need to install driver?

[@plcgoodsteam8934]

Hi There, I only installed ISPSoft and COMMGR.

[@plcgoods]

THANKS FOR CHECKING OUT THE CHANNEL! PLEASE WATCH THE VIDEOS MORE CAREFULLY!

[@talalmk7604]

thanx too much

[@plcgoods]

Most welcome and thanks for checking out the channel!

[@sunilkr7906]

Can please tell me that can we communicate delta plc and intouch scada without hardware

[@plcgoods]

Sorry I am not familiar with the InTouch software!

[@piyushjangid5219]

yes we can with the help of modbus type communication

[@piyushjangid5219]

you can also use ignition scada

[@sunilkr7906]

@@piyushjangid5219 modbus work for real plc not for simulation i think

[@piyushjangid5219]

@@sunilkr7906 no may be we can cause in ignition scada i use modbus connection for connect delta real plc

[@dnyaneshwarghadge6311]

Can you make video for rs485 communication between 2 delta dvp series plc

[@plcgoods]

Thanks for checking the channel, and for suggestion, comment & concern!

[@Time4yes]

Please make Codesys software lessons.

[@plcgoods]

Thanks for checking out the channel and for your suggestion and concern!

[@greenpower4151]

i need help abut programmable this reebot

[@plcgoods]

Please give me more detail on your question.

[@sammyay-man2754]

can you send me another link? this one isn't working?

[@plcgoods]

Hi, what link are you looking for? will you tell me what link did I give you previously?

[@sammyay-man2754]

@@plcgoodsI open your link and tried to download the program but the website says this site can not be reached....can you help me and send me other link?

[@plcgoods]

@@sammyay-man2754 please let me know what link was it and what was the content or the title of the video or ebook was it that you got its link to download, so that I can find out what went wrong to correct it.

[@ManiKandan-gc1ik]

Sir ISP Means.

[@plcgoods]

It might means Integrated Solution PLC programming software!