A smoother, quieter AR-15? The SMB from Armaspec.

Рет қаралды 305,846

Delta Team Tactical

Күн бұрын

Пікірлер: 535

@jamonrye Жыл бұрын

Am I the only one that was worried about his beard getting ripped out by that buffer tube?

@ghosthunter0404 Жыл бұрын

Nope I saw that and was wondering what type of person rests their face on a buffer tube with holes in it

@tylerbrown8026 Жыл бұрын

That was my immediate thought when I clicked on the video 😂 that thing is a beard shredder 3000 no doubt!

@jonboy9734 11 ай бұрын

@@tylerbrown8026the crease in my Magpul stock and buffer tube already rips the beard hairs out for me.

@jasonyoungfitness7140 11 ай бұрын

Yup

@TaddVentures 11 ай бұрын

1st thought lol

@professional_larper 10 ай бұрын

*I'm pretty sure this is the first time we have all seen a skeletonized buffer tube*

@adamjones7497 9 ай бұрын

I ran one for a week a few years ago back, in Arizona. In the Arizona desert. Yea… it did exactly what you’d expect in a dirty, dusty environment. - Skeletonized tubes are for safe queens, not service rifles.

@wcarthurii 9 ай бұрын

Bout to say..... Probably the last one we're gonna see, as well.

@ChrisMaher-g5l 7 ай бұрын

Of course that’s what you think, you probably don’t even run what you have on a regular basis

@professional_larper 7 ай бұрын

@user-cv6tx6yq2b don't know why you felt the need to troll but 🤷🏻‍♂️

@armedfarm3429 5 ай бұрын

@@adamjones7497 This is what I was going to say when I seen it today. No way in hell would I own I of these. The crap that would go in the tube, sand, dirt, snow, water, bugs & birdsh!t. Ya real smart.

@slavikarlov 8 ай бұрын

Geissele braided wire spring and H2 buffer is perfect. Doesn't make your weird twang noise and it's supper durable.

@TmansAquatics 7 ай бұрын

Just bought and installed that exact one into my ar with a binary trigger I’m gonna test here soon 🎉

@lc634 3 ай бұрын

@@TmansAquaticssi did it work

@WinnebagoBrewingCo 3 ай бұрын

@@TmansAquatics How was it?

@michaelrudisill897 5 ай бұрын

For the guys still running a spring buffer. Throw some wheel bearing grease on the spring. It quiets it down by alot. Not the cleanest method, but very effective. I'm sure it there's someone that will day it adds friction and effects your gas system, but in my experience doing it, there's little to no difference. After 500 rounds with the grease on the spring, it maintains the smooth quiet function, but did start to seep grease at the back of the receiver. When I say seep, I mean it shows if you have your rifle painted. Not a glob oozing out. Nice little hack a gun smith showed me until you can upgrade your buffer. Give it a try.

@jackwalker1361 3 ай бұрын

I use wheel bearing grease mixed with a low oil like 0w 20 or whatever you prefer but it beats paying top dollar for some name brand gun lube

@TerminalM193 9 күн бұрын

I've been using white lithium grease on my springs. Works great.

@timpace9216 10 ай бұрын

I just got this installed and I must say, it’s an amazing upgrade.

@stevenbarnes5220 9 ай бұрын

Can this system be weighted in multiple weights as some calibers and rounds may require?

@timpace9216 9 ай бұрын

@@stevenbarnes5220 from what I understand from the concept you can get different weights and springs to get the feel you are looking for.

@LordHolley 6 ай бұрын

@@stevenbarnes5220 they offer different weights for different calibers.

@bryanmasis1595 5 ай бұрын

@@stevenbarnes5220yes I think they provide some extra tungsten weights to fit your needs

@yusriyahbagheri8843 3 ай бұрын

@@stevenbarnes5220 yes they offer the full list of buffer weights. I have an H2 in my gun.

@seantf1414 Жыл бұрын

A lot of the sound of a stock buffer sprig can be mitigated by using some dremel paste and gun Lupe in the buffer tube and shoot for around 200rnds. It will clean up the machine marks in the buffer tube and quite it down.

@ThePerpetualStudent Жыл бұрын

thanks!

@lindajohnson1687 11 ай бұрын

Thanks for the info

@JR15A2 11 ай бұрын

Or just don't use a crappy buffer tube with machine marks.

@seantf1414 11 ай бұрын

@@JR15A2, who makes this product, without machining inside the buffer tube? I promise you I have assembled more ARs than you could imagine. Nice try though keyboard warrior

@JR15A2 11 ай бұрын

Sure, of course you have. I'm sure they were all "just as good" too. Any quality manufacturer can absolutely machine buffer tubes with a perfectly smooth finish on the inside, just like they're able to acheive on the outside. Nice try though keyboard couch potato.@@seantf1414

@humbertomedina86 11 ай бұрын

Applying a thin layer of lubricant to the buffer tube can significantly enhance its performance. Even a small amount of lubricant can make a substantial difference.

@roguemodel 11 ай бұрын

Never gave my buffers a second thought, I will have to check it out.

@mannysoto5583 10 ай бұрын

I have one in each of mine inclding myy AR10, FANTASTIC!

@ruckuswethepeep4384 Жыл бұрын

Thank you! I installed one of these and put spring back in and it would fall out!!! You are the first one to tell me you don't need it! That is one of the reasons I buy a bunch of shit from you guys👏

@Ih8liarsandusers Жыл бұрын

You can clearly see in the video that they arent using it.

@mobilegamersunite 4 ай бұрын

LMFAO 😂 bro!

@matthewschmitt2454 Жыл бұрын

Was planning to upgrade my buffer system to a captured buffer, I'm glad I came across this! This system seems to be the best of all of them. Thanks for putting this out, I'll purchase for all my ARs

@derekturner3272 Жыл бұрын

What makes it the "best of all of them"?

@matthewschmitt2454 Жыл бұрын

@@derekturner3272 these don't have the failure points you'll get from JP and other captured buffers, as they don't have the o-rings between the buffer weights that eventually wear down. The entire system is held together with a tension pin, instead of a screw with loc-tite, so recoil shouldn't affect it over time like in the JP's. All around I feel this is a better system design 🤷

@derekturner3272 Жыл бұрын

@@matthewschmitt2454 Thanks! I've made all mine, and when I see a cool new design, I often machine something up to get a better look at it. The orings and "loose" weights on the JP system provide some "hysteresis" that some say is good/needed. But so far, I've heard no compelling argument that gains my agreement on that point. I, like you, don't like betting my life on Loctite. So, any design that removes failure points is all goodness.

@matthewschmitt2454 Жыл бұрын

@@derekturner3272 I agree, to take a basic buffer and spring system that works, and voluntarily add failure points, probably isn't the best decision. However, this system is what I was waiting for 😉

@weezem 8 ай бұрын

@@matthewschmitt2454 I've never had an issue with the JP enterprise buffer assembly. You act like replacing o-rings is an expensive and hard thing to do. You just sound like a lazy person who doesn't take care of their stuff if you're crying about o-rings needing to be replaced. That screw has never backed out on me either in both an AR-15 and LR-308 platform.

@wooddawg4868 5 ай бұрын

For me, any firearm I have must go bang. With this buffer system, it seems nice and smooth but my original buffer and chrome silicone spring feels great, more importantly, it works and cycles.

@jonathanclark6652 10 ай бұрын

Been building firearms with DTT parts for years. Great quality, can't beat the prices!

@jasonransdell1647 Жыл бұрын

I have the previous gen 2. I absolutely love it. It makes a big difference. I bought all of the individual weights so I can tune my AR for several different scenarios. The weights were $10 ea.

@LowBudgetYoutuber Жыл бұрын

I'm new. Why would you have different weights for different situations?

@sciji3118 Жыл бұрын

@@LowBudgetKZbinridk if anyone answered you so I'll try, the biggest thing is reliability which is assured by most companies by making the weapon over gassed on purpose, this means that it can also cause damage over time and the way you tell if it's overgassed is the ejection pattern. Ejection pattern is when firing the cartridge case is ejected and bounces off the deflector behind the ejection port, if it's bouncing off more forward of the ejection port than 3 o clock to 430ish o clock it's overgassed which can be mitigated by adding weight to buffer. If cartridges are bouncing off the deflector behind the 3 o'clock position it's likely under gassed or you should lower the weight in the buffer until it's at 3 o'clock position otherwise it's gonna take more than weight. Everything you could ever really learn without doing the things with the things can be learned right here on YT so you're in the right place so do your research and enjoy tinkering. Also, the best buffer system for the money I've seen so far is by strike industries it's a kit that comes with everything and they sell upgraded springs too if I'm not mistaken.

@LowBudgetYoutuber Жыл бұрын

@@sciji3118 Wow. I learned nothing. I realized these all made in the time of War to the lowest bidder and then fifty plus years later all the legislation and you cannot change a simple part without creating a Felony. Fast forward to now this good for them if it jams, misses or explodes. After typing that I realized pry inside job so we all not all wearing a legal motion activated voice controlled shoulder fired mini gun with chemical bullets.

@LowBudgetYoutuber Жыл бұрын

@@sciji3118 Simple question from a simple mind. I was thinking you would say weights change depending on type of ammo and if using a suppressor for proper feeding. Also why cannot it be contained in a Soundproof or Liquid butt stick? Also what is the exact amount of gas needed to cycle and where is bleeder like valve to throw away extra gas and not cause further wear and tear. You know them, I Dream of them. However nothing like Modern. I see the Future.

@LowBudgetYoutuber Жыл бұрын

@@sciji3118 Also why cannot we have a Digital Spring in Butt stock for change on the fly also would love to see Electric Paintball Trigger to replace them all. Just a Dreamer. Nothing is Ok, it is old.

@snagglesmagoo2750 2 жыл бұрын

I just bought the one for the 9mm. I wish I'd known beforehand that the weight has to be removed from the BCG. Put a kink in my joy of installing it. I really like the Beach Bash '44 Tee. Very cool.

@glennwest267 11 ай бұрын

Does it help recoil?

@dustin2134 8 ай бұрын

@@glennwest267i came here to ask the same thing

@VisceralConstruct 2 жыл бұрын

I have 2 of the Gen 2 versions. Those work perfectly. I’m definitely going to be trying this out.

@bonesely9858 2 жыл бұрын

What are the failure points of it? About how many rounds have you have you fired? Are you keeping the guide rod and spring oiled? Are you shooting suppressed?

@RobertGalin-dw3nj 10 ай бұрын

Experimentation with different ideas is great, as long as safety isn’t compromised.

@DeltaTeamTacticalMedia 10 ай бұрын

We agree. Safety is important.

@XDgreatmoment 2 жыл бұрын

The buffer weight on these is 1 solid piece and the difference between this compared to JP’s loose buffer weight is the JP design reduce carrier bounce.

@I_NeedToGetOffThis_App 2 жыл бұрын

Could you explain this a bit more? I'm deciding between this one or the JP's. Thank you.

@stephen_crumley 2 жыл бұрын

@@I_NeedToGetOffThis_App watch 3:51 through 3:55 and pay attention to the very end of the buffer cycling forward and you’ll see the bolt “bounce” when it chambers the next round. The JP assembly inhibits bolt bounce, having a solid buffer weight keeps you from being able to stop bounce

@I_NeedToGetOffThis_App 2 жыл бұрын

@@stephen_crumley thank you

@michaelnyden8056 Жыл бұрын

Bolt bounce doesn’t matter and does nothing on a semi AR, only full auto which doesnt apply to most of us I would think

@dogevanzandt2889 Жыл бұрын

@@michaelnyden8056jp system is still a better system, cope.

@TheDkb427 2 жыл бұрын

Wtf is with that skeletonized buffer tube!? Seems like a no go for a serious build and facial hair lol

@FumiTheKitten 2 жыл бұрын

Gas in the face.

@Marcus2750-u1t 2 жыл бұрын

Its just to showcase the spring…. Sheesh

@controlledchaos8851 Жыл бұрын

@@Marcus2750-u1tright ?!?

@LevelUpTrucking Жыл бұрын

It’s still cool af

@gedeondumesyeux2259 Жыл бұрын

Free shave 😂

@KyleAKG 9 ай бұрын

Just watched this and ordered one for myself, I can't wait to get it installed!!

@DragovsSly 2 ай бұрын

These are amazing, I bought this buffer to start a circumcision business.

@TacticalBuffoonary 2 жыл бұрын

I have the version 2 in all my ar15’s and Ar .308/6.5’s. They are super quiet and smooth. This is much cheaper than buying overpriced Jp buffer set ups.

@MRD0889 2 жыл бұрын

Have you have issues with the 2 stage ? Mine hit the 1k rounds and started giving me failure to feed, causing my bolt to chew the brass lol. I swapped out to my standard buffer system < I always keep in My rifle bag> And bam back in action ate and spat the brass with no problems. When I got home I took the 2 stage apart and cleaned it up, wasn't that dirty to be honest. But I know there's more parts moving in between so that could cause a failure.

@TacticalBuffoonary 2 жыл бұрын

@@MRD0889 I would replace the springs’ they are a consumable part. In my particular case’ all my Ar’s including my Ar .308/6.5 have lightweight titanium bcgs and adjustable gas blocks so my recoil is less and so is the reciprocating mass. I have over 1k thru my 10.5 with an frt 15 and 1k thru my 16” ar-15 and my .308 AR. I do have spare springs for all the parts for all my rifles and hand guns including springs for my armaspec buffers. I do have standard buffers and buffer springs too. I bet your springs are weak and need to be replaced’ they are consumable parts that don’t last forever. Ill keep a close eye on mine to see if they start to fail to feed but right now they seem fine.

@MRD0889 2 жыл бұрын

@@TacticalBuffoonary damn tho .. 1k rounds and springs just fail 🥲 I run a bootleg BCG, when I'm not running suppressed I eject nicely 3 o'clock and when I'm running it with my Wolfman I switch it to S for full suppressed to let them gasses out. I eject almost 4 o'clock. I mean I'm gonna give it another 200 round run next weekend, if it truly is the springs and not just the light grime, I'm gonna have to go back to boring noisy spring and buffer 🙃🙃 But yea keep an eye and let me know if you get any weirdness out of them after 600 ish rounds

@Gunsmith67 2 жыл бұрын

You can pay for quality.. of you can buy crap. Always your choice man.

@CommonSenseUncut 2 жыл бұрын

@@MRD0889 I run a 10.5" 7.62x39 carbine AR pistol with the 2 stage Gen 2 H3 Armaspec rn but before I was using that I had the Geisselle Super 42 braided spring with an H2 buffer. I didn't particularly care for a quieter action, I wanted the 2 stage system to reduce that heavy recoil from the buffer bottoming out, and i wanted more reliable feeding. I'm gonna have to do some more shooting with it but the difference in felt recoil is really noticeable. However much like you, I immediately noticed it caused more damage to my brass, it almost shows signs of increased pressure on the rim of the cartridge which is really strange. I think this issue would be solved by armaspec simply making a stronger spring available to replace the first "stage" long spring. Now, I'm also using an enhanced extractor/bcg, so I may just have too much tension on the casings but I'm not sure..

@jamespena1793 10 ай бұрын

Gonna have to check one out

@bkillz33drift 10 ай бұрын

literally went to check out this system and came across that you guys are doing a give away pretty awesome man

@kentsmith6063 11 ай бұрын

The new upgrade looks like a good improvement

@AtomkeySinclair 2 жыл бұрын

Watching the intro... I winced for the man's mustache and beard.

@viviv1000 9 ай бұрын

Hey man. To each their own. Jesus is always pictured with similar facial hair Himself

@dukeblue2573 11 ай бұрын

Looks like a great improved upgrade for better and smoother working.

@Im0utlaw Жыл бұрын

Thanks for this! Didn't know about these until now. Just ordered the Gen4 SRS from Armaspec

@wheezzl Жыл бұрын

What's the difference between the SRS and the SMB?

@danefuentes3877 Жыл бұрын

Just bought the SMB Gen3. Although it DOES eliminate the annoying“twang” you get with a standard buffer spring, it is EXTREMELY difficult to remove from the buffer tube. The hammer is in the way and you have to force it out pretty hard. Still not sure I’m keeping it but it works fine.

@trevishornsby7385 Жыл бұрын

By hammer do you mean buffer detent?I want to buy one but really don't have the time for the bullshit just to get the twang to go away...

@danefuentes3877 Жыл бұрын

⁠⁠⁠No, I’m referring to the hammer that strikes the firing pin. The detent is an inconvenience at most. But due to the fact that the SMB is a solid steel rod, it doesn’t bend out of the way the buffer and spring does. You can kind of see it in this video @1:45. In the video, the SMB buffer is resting on top of the hammer. However, once it is installed, when you try to remove the SMB, the bolt-side face of the SMB buffer rests against the back of the hammer when it is cocked and it takes some serious elbow grease to get it past the hammer. Uncocking the hammer doesn’t help either because then it just becomes even taller.

@carterm3301 Жыл бұрын

Well big dog I guess that’s true but as long as you don’t have a dimpled backing ring you can also just back out the buffer tube which I guess would take more time but could be less of a headache.

@loviticuss Жыл бұрын

😅 or you can just press the hammer down it has a small amount of travel left in it and it's plenty to pull out the smb

@danefuentes3877 Жыл бұрын

@@loviticuss I have an aero precision lower and that is the first thing I tried. Not enough post-travel to allow the SMB to come out of the buffer tube. The buffer tube is almost in line with the top of the lower receiver. If YOUR hammer goes down far enough to let the SMB out of the buffer tube, something is probably broken. WIth all due respect, do you actually own an SMB, or are you just spitballing here? So far, I've decided to keep it in but it's still not any easier to remove. It's not something I clean that often anyway so it should be fine.

@HighRoad317 3 ай бұрын

The first time I shot my old Bushmaster I was sure it was broken, glad technology has caught up!!

@Peetabread555 Ай бұрын

Was planning on going with the unrivaled deadblow system but the duty one is always sold out, glad to see other similar buffers, might have to grab one of these

@danielescobar7618 Жыл бұрын

I just wish there was a full rifle length travel one. Might have to turn one, looks simple enough to modify

@matthewfeuge8387 11 ай бұрын

This is phenomenal, I need one right away.

@TimMayville Жыл бұрын

The only issue I ran into was this. A POF 7 position buffer tube. I didn't realize it's just a little longer. So, the 308 version would drop to far in. What I did. Cut some buffer spring coils , just enough to full the gap. welded 2 washers to the spring. Placed it in first and then the armspec buffer in and locked it in. It let's the entire process smoothly work and doesn't bottom out...

@Ww-dl7vr 10 ай бұрын

What the fuck.......

@thomthompson9217 7 ай бұрын

Similar to the JP Silent capture system. I have the JP on three of my rifles. This type of buffer system greatly reduces the noise inherent in AR-15 & AR-10 operations (as well as smoothing the buffer cycling). I wouldn’t build another AR platform rifle without the JP Silent Capture System or the Armaspec SMB.

@edkeck3919 11 ай бұрын

I never noticed the sound of the spring. After watching this I can’t unhear it. 😂

@paulfrederick9339 11 ай бұрын

Very informative. Opened up new info here.

@mslynn1982 9 ай бұрын

This is definitely quieter than most AR-15's. I'd like to try it out at the range

@raymondklieber6475 10 ай бұрын

I like the non-contact of the spring aspect of the system. Any parts that mitigate direct contact are always akin to longer life.

@ghosting08ghost51 11 ай бұрын

Man this is awesome. I love this product. Definitely would love to buy this.

@richardgreen3101 11 ай бұрын

This is a great upgrade to install on your rifle!

@JenkinsStevenD 11 ай бұрын

I just bought a JP silent capture spring. Might have to go this route for the next rifle's upgrade so I can compare.

@cjspaar2090 10 ай бұрын

It works great! Quieter suppressed and smoother impulse...

@kentsmith6063 11 ай бұрын

Looks like a nice improved buffer system

@Renrondog 4 ай бұрын

Looks like a very nice product. Personally I like the sproing sound. I'm more concerned about the noise from the other end. Still a nice product.

@mikedrabandt4435 11 ай бұрын

Like the smooth super quiet buffer system

@Grizzly406 Жыл бұрын

Hmm a skeletonized buffer tube… bet that got weaker with those cuts.

@samozary Жыл бұрын

I have an SMB-H in both my AR 15 (5.56 mid length 16" barrel) and Banshee 9 mm. Smooth quiet action and noticeably lighter recoil in both guns. I ordered direct from Armaspec. I wouldn't order from Delta Team. I've seen to many bad reviews and complaints. Armaspec took 2 1/2 weeks for delivery. kind of to slow for me.

@Baltimoreed 3 ай бұрын

The Tubbs flat buffer spring is also quiet and a lot cheaper. Also smoother as by being flat it has more coils. Have flat buffer springs in all of my ARs. No noise.

@Fabyfakid 2 жыл бұрын

Just got one to be able to use my rifle without the buffer retention pin, without parts flying out.

@JamesHanson-w5j Жыл бұрын

I got a couple of questions. Please excuse me if I missed it in the video. 1) Are these mil-spec or commercial parts? And more importantly!! 2) Where can I get a buffer tube like the one in the video!?

@jarheadhoss499 2 ай бұрын

If you leave the buffer retainer pin in there it's a pain to remove. I have one in an Aero AR 18" rifle length gas with a Miculek compensator. There is no movement in the barrel when shooting.

@murraychapman3958 11 ай бұрын

Like the idea of quiet buffers

@Ayanuli_ Жыл бұрын

All I can see is my beard hair getting stuck between those slots and pulling the shit outta it

@meuls82 9 ай бұрын

1Does this aid in your AR shooting flat, like the JP Enterprise silent buffer system? Please respond!

@chanellemothersill3090 2 жыл бұрын

That buffer tube is sweet

@louisGauto 10 ай бұрын

these really make the weapon smooth and make any feel premium, add a rise drop in trigger and this into a cheap AR and wow

@Ww-dl7vr 10 ай бұрын

And wow it's still cheap and you should have spent the money on a better trigger

@richardgreen3101 7 ай бұрын

The video makes replacement look very easy.

@TheBarefootedGardener Жыл бұрын

I found it it’s not too bad with carbines, however, that would be really really cool in fixed stock rifles.

@davidlane9120 11 ай бұрын

Wild looking buffer tube.

@markherman6971 11 ай бұрын

Looks like a must have!

@jimturic9782 10 ай бұрын

If and when I decide to upgrade I'll take a closer look at this. How does it effect felt recoil?

@fcpraesidium 10 ай бұрын

Cool; I wasn't aware of this, thanks.

@rid3withthewindvaj131 2 жыл бұрын

Armaspec should make different weight springs so we can fine tune our ar platform like the JP.

@jasonransdell1647 Жыл бұрын

They do make and sell them. I bought every weight. I have them all. 3 or 4 in total.

@Ih8liarsandusers Жыл бұрын

They clearly show on the website what to do with the spring to fine tune it a quarter pound at a time. Pay attention.

@michaelnyden8056 Жыл бұрын

@@Ih8liarsandusersweird though because according to everything I read online, cutting or shortening a spring actually increase it’s effective spring rate and does not make the spring softer.

@justgonnastay Жыл бұрын

@michaelnyden8056 It reduces the preload. I'm not sure the effect that has on this system though.

@allisonsmith9050 4 ай бұрын

How is gen 3 different than 4? I ordered the 4th gen a few days ago and I hope I’m not disappointed. $95 was a tad more than I wanted to spend, but if it works, it will be money well spent.

@kevintowell415 10 ай бұрын

Interesting I'll take a look at this upgrade.

@animeplusmore 2 жыл бұрын

Who makes that buffer tube

@matthewreese6367 11 ай бұрын

I love the cutaway buffer tube. Does gas get out of it?

@5.56x45NATO 6 ай бұрын

If you can hear your buffer twanging when you shoot you got pretty good hearing.

@tezlastgaming6382 Жыл бұрын

That buffer tube looks neat skeletonized, but my mustache is saying it would rather not be ripped from my lip.

@kasb58 2 ай бұрын

DO you know if this was changed? On the Armaspec website the gen 3 smb looks completely different.

@forestsoft 15 күн бұрын

Does this help with recoil?

@SmedleyButlerII Жыл бұрын

This one looks like it may even be better than the JP one. This appears to not have any rubber O rings, which ends up being a failure point on the JP every few thousand rounds. Does anyone have any first hand experience of the long term reliability of this?

@gameingextensions7857 Жыл бұрын

I’m at least 2500- 3000 rounds deep on the G2. I’m starting to think about replacing the spring, but no issues. For the price I prefer this to the JP.

@gameingextensions7857 Жыл бұрын

I should add that I have a jp on one of my other rifles and it is great but the I rings do get chewed up after a thousand rounds or so.

@mikearrowsmith8361 11 ай бұрын

Interesting and informational. Thanks!

@cll1205 9 ай бұрын

I wonder how much of a difference it would make on a suppressed 300blk

@dennisrael1716 11 ай бұрын

I like the setup But when the Bolt returns you can see it through the Slots on the stock It looks like it would be Weak Metal.

@tzurachienu 10 ай бұрын

Would it be a whole new area to clean?

@ScrapyardSentinel 7 ай бұрын

How is this for an under-gassed AR15?

@robertwilkinson2293 Жыл бұрын

As an AR user since the 1970's the twang never bothered me.

@TeensierPython Жыл бұрын

Does when you get into suppressing your rifle. Or if you switch to something like this. Then you don’t want to go back.

@johnecrouch2671 10 ай бұрын

A pretty simple upgrade for quieter, smoother operation

@Serenityindailylife Жыл бұрын

I have the 2nd genius quieter but the stock spring will outlast the armaspec. It uses 1911 springs.

@nathanwebb4671 9 ай бұрын

Is the weight adjustable?

@Kenny_F_N_G 4 ай бұрын

How would that work with a fos tech binary trigger?

@destiniwillits8372 10 ай бұрын

I can see that it is "quieter" but I've never encountered a regular buffer that I would call noisy compared to everything else happening at the same time. I guess this design is "better" in some other ways that could make it worth choosing this compared to spending about the same for a buffer and spring, but how many people are shopping for a buffer and spring that aren't already part of the gun or a kit.

@1HAPPYBOY 9 ай бұрын

A very unique design!

@TeddyThundercock 10 ай бұрын

I have one and it works well.

@brianleabo6295 6 ай бұрын

Is this the jp enterprises buffer ? Or another company? If so witch is better?

@wallyunitus8071 Жыл бұрын

I bought one for my noisy 308 buffer and I did not do anything for the sound, I'm guessing the buffer tube itself is not machine the smoothest on the inside, I bought one of these just to try and reduce the cringy noise on my rifle that was giving me chlli willies and making the hairs on my arm stand up and it really didn't do much for the noise, it helped a little bit with recoil, though which was nice. I guess on the 308 the BCG is so fat that it makes contact with the inside of the buffer tube so I bought this Arma spec buffer system just for that but I guess it's just inherent with the AR 10 design

@ARP_king5.56 Жыл бұрын

Where can i get that buffer tube

@americanmade422 Жыл бұрын

I have the older version, its been great

@joelvanallen6562 10 ай бұрын

This doesn't work with a law tactical folder does it?

@trumanhw Жыл бұрын

Too many words. Simply stated: It's a captive spring that's smaller than the diameter of the housing but larger than the guide rod it sits on. Thus, none of the points that're compressing can encounter friction ... and it's the friction that creates that nasty noise. You can of course "tighten" the stock buffer spring to make the radius smaller by exceeding the elastic deformation into plastic deformation. But this product looks well made, to better tolerances. It's Gucci. Enjoy it.