Really appreciate the time you took to show us this.... going to shoot the raptor on tomorrow. And a big Hi from England....👍
@hannible10025 жыл бұрын
How did it go Dave?
@tattedup11894 жыл бұрын
Is there any specific type of paint to use when your purchasing your tint color ?
@wingandhog2 жыл бұрын
Automotive if spraying a vehicle
@daytonasunset2 жыл бұрын
@@wingandhog automotive 2k paint with hardner, or basecoat? Thx
@wingandhog2 жыл бұрын
@@daytonasunset … per U-Pol’s technical data sheet: What can RAPTOR be tinted with? A. For best results, use solvent based acrylic basecoat toners (ask your paint supplier to leave out the binders). NOTE: Acrylic basecoat toners tend to have high color strength so use sparingly (less than 10% tint by volume). RAPTOR is compatible with any urethane based color, including 2K acrylic solid color and mixed acrylic basecoats, and can be added up to 10% by volume. RAPTOR cannot be used with water based, polyester, or enamel paints.
@ProjectFaceOff2 жыл бұрын
Thanks for the video. I like how you're saving your caps to verify color-correctness from bottle to bottle. Had not thought of that. Also, I liked your idea of pouring an amount out BEFORE putting the the spray nozzle in.
@Stang2803 жыл бұрын
That syringe you have is a 10ml. Does this mean you drew up paint 8 times with it to reach your 80ml goal? Just making sure you meant 80ml and not 8ml. Thanks!
@WayneHomewood7 ай бұрын
Thank you nick very helpful wayne
@pourtierbeatz7804 Жыл бұрын
how do i keep it from drying so fast i poured the whole hardener like it said on the roll on kit and it dried up within 10 minutes :[
@rascal7285 жыл бұрын
Thanks for info brother. Now I saw a video of a guy doing a F150 it was a two tone white and green and he added something else to the paint and said it didnt fit in bottle. Do we need to add anything else to our paint or did he just add an extra step?
@tylerswearengin57634 жыл бұрын
CAN I BE THE 1000TH GUY TO SAY PAINT INSTEAD OF TINT? LMAO
@zacstoltzfus80225 жыл бұрын
Is there any downfall in tinting with paint that has the “binders” in it, aside from color matching being off? I’m wondering if the binders weaken or have a negative effect on the hardener in the UPOL
@NickOsterbaan5 жыл бұрын
You do not want to do that, with binders will not mix correctly with Raptor and you will have uneven coloring as you spray. Do NOT use regular paint! Tint can be purchased from your local auto paint supplier and make sure you specify that it cannot have binders or fillers!
@cesarpulido48965 жыл бұрын
Very nice explanation.
@pandoxno34 жыл бұрын
can tint the White Raptor liner with any tint you want? Or do you have to buy the extra tintable version of Upol?
@ML61034 жыл бұрын
All Americans are ‘going to go ahead’ and do stuff. Love it 🇺🇸
@Cypaful2 жыл бұрын
Thx for info sir!
@dannyfubar30995 жыл бұрын
Excellent, appreciated.
@drsony83 жыл бұрын
You put water? Or hardener?
@zacstoltzfus80225 жыл бұрын
Also; can you leave green frog tape on the application for 3 to 4 hours after you’re done applying raptor u pol? Will it still come off clean?
@NickOsterbaan5 жыл бұрын
I started pulling my two after about 1 1/2 hours. You can tell when it's ready to be pulled because the Raptor won't be lifted when pulled so go very slow at first and if it lifts at all stop and wait another 30 minutes. It really will take common sense at that point but your temperature and humidity will play in effect in time of drying so use common sense and start somewhere that is out of they way and not directly noticable if the raptor peels stop and wait. It won't peel off it will just stretch with the material on the tape so it won't ruin anything.
@americandude38252 жыл бұрын
What gallon air tank / psi should I use?
@gorgelowa4643 жыл бұрын
Hello I have a question can you use raptor liner without paint
@rmmm67252 жыл бұрын
Yes
@gtoutdoorsaventuras40103 жыл бұрын
What type of color did you use
@frostacevedo16285 жыл бұрын
What kind of paint do you use or does the upol provide the colors I know they sell a red kit
@NickOsterbaan5 жыл бұрын
When using the Raptor tintable kit you need to go to your local auto paint supply store and get "tint without binders" it's very important not to use the term paint because paint is a finished product. You want to use tint which is just the colorant with no added chemicals that make it "paint". All the information can be found on the raptor liner website.
@Farmor4x44 жыл бұрын
@@NickOsterbaan This information is quite useful, I congratulate your channel because you are the only one who answers our questions, keep it up, I already subscribed to your channel for the interaction you have with us, like and like for you. By the way, could you help me determine how many 1000ml pots I need to paint a Chevrolet SILVERADO 2012 double cab pickup
@zacstoltzfus80225 жыл бұрын
Once you apply the raptor tint, do you need to hit it with a clear coat finish?
@NickOsterbaan5 жыл бұрын
No, but if you want a little more shine to your raptor you can add clear coat to the raptor on your final coat.
@Farmor4x44 жыл бұрын
I do not think it is convenient to add transparent after the final finish, because that layer would scratch easily and the paint would look ugly. that is, it would take away resistance and hardness, because that transparent layer would be scratched, and the raptor layer would not scratch.
@Farmor4x44 жыл бұрын
@@NickOsterbaan I do not think it is convenient to add transparent after the final finish, because that layer would scratch easily and the paint would look ugly. that is, it would take away resistance and hardness, because that transparent layer would be scratched, and the raptor layer would not scratch.
@mattaoespencer53395 жыл бұрын
How much of the tint do you specifically have to mix with 100ml ?
@NickOsterbaan5 жыл бұрын
I covered that in the video. A bottle of raptor is 1000ml you can add up to 10% of tint which is 100ml maximum. I found that 8% was right for my color and application. You want to start at 4% and increase the tint as you test the color until you like it.
@wildingarage20034 жыл бұрын
Should I use reduced base coat or unreduced for raptor liner?
@wingandhog2 жыл бұрын
Best to contact U-Pol directly. They are extremely responsive.
@joelgregoryhayes70455 жыл бұрын
Did you just use 100% Acrylic paint for tinting?
@NickOsterbaan5 жыл бұрын
No, I went to the local automotive paint store and asked for pure tint no binders in my desired color code.
@joelgregoryhayes70455 жыл бұрын
@@NickOsterbaan thanks i thought so my Automotive paint guy told me to use acrylic paint but its not true. I'll pick up some tint then.
@BellyUpFishGarage5 жыл бұрын
How close to the tint did the final product come out? I've heard we need to go a couple shades darker than what we really want?
@joelgregoryhayes70455 жыл бұрын
@bellyupfish we went pretty much on point with the same color.
@NickOsterbaan5 жыл бұрын
@@BellyUpFishGarage mine was actually darker then I had anticipated so I do recommend mixing a single bottle to get your color right and spraying it on a test surface and let it completely dry. You waste a bottle but once it's dried you know for sure if it's to dark or to light and you can adjust more or less color then for you your final product. I wasted 2 bottles once getting color right and I'm glad i did because the minor cost was totally worth knowing what it would come out looking like exactly. Also with my color I used the Raptor lightened up as it cured over 4 days so if it looks to dark but close let that test spray fully cure for a few days and then see if the color is right
@roundrock88084 жыл бұрын
Where did you buy your toner?
@breakingames77725 жыл бұрын
Don't they just sell colored bed liner?
@NickOsterbaan5 жыл бұрын
They do, but with Raptor Liner tintable you can do any color you want and your not limited to standard colors. For instance I color matched my factory paint color.
@jorgecastillo11755 жыл бұрын
200ml of hardener and 100ml of base color for each bottle right? Did you reduce the base color before to put it in the bottle?
@NickOsterbaan5 жыл бұрын
No reduction at all for my application.
@TroutfishingAK4 жыл бұрын
what paint are u using to mix with acrylic ? 2k ? tupac colour?
@donnfl5 ай бұрын
RAPTOR RECOMMENDS MIXING IN EXTERNAL CUPWHEN ADDING COLOR
@JoseGuzman-bt9gj7 ай бұрын
todo un quimico
@TXNFan933 жыл бұрын
How many ml is 8%
@Red-yn9fv3 жыл бұрын
I think it’s 80ml
@scottloutner52533 жыл бұрын
Why are saying add water
@kielwiley77593 жыл бұрын
He didn't want to waste product so is using "water" and "tea" instead of "hardener" and "tint". You should not add water, or tea, to your raptor, NOT EVEN GREEN TEA!!@!
@ShockWaveGamings234fg321f2 жыл бұрын
2k paint guys
@lennybaldacchino2 жыл бұрын
how many dopes are there to explaine, how to mix and shake, as those who are professionals where not enough ,hahahaha
@jamesleon2770 Жыл бұрын
Put marbles in the bottle
@rascal7285 жыл бұрын
Thanks for info brother. Now I saw a video of a guy doing a F150 it was a two tone white and green and he added something else to the paint and said it didnt fit in bottle. Do we need to add anything else to our paint or did he just add an extra step?
@NickOsterbaan5 жыл бұрын
To clarify you do not use paint, you need tint with no binders. Second I have no idea what he added in his video but you can add clear coat to the bottle as well to add some shine to the raptor.
@christiancowboy3525 жыл бұрын
@@NickOsterbaan When you say "tint" what do mean and where do you get it?