How to apply Raptor Liner on a Jeep.

[@ryanclark7681]

I've watched 15 videos and upol instructions and you are the first to post nozzle rotation. Thank you!

[@5150MotorSports]

Thanks for watching….

[@gamesofcontent]

Tip for adding color. When I did my jeep I went to the pet store and got one of there large syringes. I could then measure exactly 50ml and squirt in directly into the raptor liner without any mess at all. I also died them all at once so I didnt have to worry about mixing them up. Color came out way lighter than I thought it would, but it actually looks better a lighter blue.

[@5150MotorSports]

i Bee Amazin Great tip thanks for sharing...

[@willdrivesu7914]

Wow, awesome tip, seems like it would be a more precise measurement too I will have to do that when I line my vehicle soon. Thanks for that!

[@immelting9834]

Thank for posting the nozzle rotations chart. I've done the 2 rotation on my quads frame . Holding up great after 5 years and a lot of abuse.

[@willdrivesu7914]

Awesome, just the kind of comment I need to hear before pulling the trigger on doing this to my vehicle! Thanks, 😁

[@nater3113]

Just did a low mile 93 2500 chevy with the raptor coating. Paint was falling off now it looks like a new truck. Good stuff.

[@5150MotorSports]

Nate R Raptor Liner is amazing, professional results from a DIY.👍

[@nater3113]

@@5150MotorSports 1st time using the coating. Watched allot of vedios. Took many days to get the bad Chevy paint off the truck. Took more time in prep then putting down the raptor coat. Few over spray spots to clean up. Great finish. Glad to have become a raptor liner person.

[@kylepowell9829]

Nate R how many bottles used

[@EvelioPerez]

great job guys! two observations 8:22 enter the truffle shuffle! (I almost died laughing) 15:58 a standing ovation for the man who saved this project!

[@jerryquintana2508]

Looks great I have thought about doing my entire Fj cruiser. I will be doing my steel winch bumper this summer getting tires of repainting it every couple of years. Did my sons FJ cruiser roof in white this summer came out great. Great product easy to use. You need at minimum a 6 gallon compressor. Does not help with sound deadening I have a buddy that did his entire Fj Cruiser.

[@conga7754]

thats the only way to shake...great moves. superb vid

[@setholiver1581]

It’s supposed to sprayed at 50 psi the first 2 coats then 2 70 psi coats and when doing tintable raptorliner it takes 3.25 oz per bottle not 2 oz it’s going to die back some. I spray raptorliner for a living have a shop in Florida but it came out pretty good needs one more 70 psi coat to make the texture on the passenger side match and be even and consistent

[@5150MotorSports]

When we used 45 psi we didn't like the texture it was way to course for are liking. Using 80 psi and the adjustable spray gun nozzle turned out 2 turns gave us the result we wanted. Our Raptor dealer suggested 2 oz of color base coat without binder to matched are factory color per bottle. It came out fairly close but a little light maybe 3.25 oz would have been better.

[@setholiver1581]

The first 2 coats are to cover then the other coats are for texture with the higher psi

[@Keven_Fadez]

Seth Oliver. I've been thinking about spraying raptor for a living I'm in texas and no one does it around me there's some line-x and toff shops but there in my opinion a little pricey. I know they offer life time warranty but how do you handle offering spraying raptor instead of them going to one of those higher end shops?

[@setholiver1581]

Keven Avila I started as a mobile bedliner guy and built my name and did that for 5 years then got my shop and I have a few contacts with a few companies and I do well at what I do and I do body work. But I don’t no how it works over there

[@Boxing007]

Where in florida?

[@hectorsilva4595]

Great job guys. Love the scenery beautiful mountains

[@jaredalexander3403]

Your a pro with that sheet metal cutter good job man

[@long-jeep]

looks great with the Rhino liner

[@5150MotorSports]

Thanks

[@jonasnydahl]

That sound is special. Almost put on earplugs when I Raptored the high-top on my Chevy van. Didn't, but almost :)

[@rkc2617]

I seen this style of keep at an off-road jamboree years ago and it's been on my build list ever since. Awesome job. 80lbs psi looked great even on cam.

[@CRTRUCKING113]

Great job.help me a lot with my project.thankmypu

[@big-patria-lo3508]

Love that red on there super nice 👍🏼

[@NorEastBeast]

Nice Jeep man! What color did you use?

[@muzzaball]

I actually thought first coat was at 90% coverage? Yours does look pretty darn good - I really love that color, looks a bit Candy Apple and metallic? Nice job. I think it is a pretty forgiving product! Thanks for sharing, cheers.

[@5150MotorSports]

Thank You! The first coat was much less, as we didn't want to have and type of runs and this gives the the second coat something to adhere to. The Colorado Red look amazing in the sunlight it does have that Candy Apple and metallic look. Your correct, Raptor liner is very forgiving and easy to spray.

[@dytrdr5]

It still surprises me how many raptorliner videos I see with people spraying without proper PPE. The hardener in raptor line has isocyanate, highly toxic and either you use a charcoal filter mask and change the filter every couple of hours or a supplied air respirator is needed.

[@MrTR0uBL3]

I mean he is outside in the open of he was spraying in a booth then yeah he need a charcoal mask

[@MrSims-ky2ne]

Sprayed mine barefoot last night, no eye protection, or mask. In my closed garage and smoked at least 3 cigarettes (one per bottle shaking session)

[@kw-vu2ng]

Nice Job! What size compressor do I need to apply this product?

[@5150MotorSports]

Thanks for watching and the support. We used their Raptor Professional spray-gun and they recommends a air compressor that can supply 40-60 psi @ 5-6 cfm…

[@VivoPaContarlo]

It came out pretty dope 💯💪🏽

[@chevyforlife1000]

nice raptor liner job but you shouldn't stir body filler it's not good for it works better if you keep spreading it over and over till you get a contestant color and try and use a piece of metal or parchment paper to mix on just a tip still like the video

[@justinmurphy2227]

Yes....I've always been told to "fold" the hardener into the filler....not stir because it can lock in air bubbles and cause cracks later. Then again, I'm sure I've added air in before.....probably a scare tactic to make for good practice so it can't hurt to just keep doing it the way I'm taught! lol.

[@rodrickkennedy2940]

Hey man is there a certain type of dye you have to use to change the color

[@5150MotorSports]

We used Visper automotive paint to tint the color, thanks for watching.

[@rodrickkennedy2940]

Alright thanks

[@bezalelex31]

Use a black magic marker to circle all areas and dimples before applying bondo. Quick ID and faster application. 👍 Ps. Do the small and easy stuff first then larger and more difficult ones.

[@calebm7133]

The old bondo on a piece of cardboard. Haha we've all been there at some point.

[@Glockfawty007]

How many liters did this take you? And how many coats were you satisfied with? Maybe you said in the video but I didn’t catch it. Also what kind of paint did you mix in to get your color? Great job btw.

[@rogerrichardson2223]

Painters always start at the highest point work there way down don’t drag the hose on what you painted peel the tape as soon as you spray it it’s dry looks good in red

[@5150MotorSports]

Not necessarily, some painter prefer starting at the bottom working up, you just needd to be aware of your air supply. Also your tack coat starting from the bottom helps the paint from running. The hose getting in the way is always a concern even from starting from the top, once you have one coat you need to be aware of you hose..

[@dansears9204]

@@5150MotorSports I owned a body shop and have been painting 35 years , I have never started at the bottom always top down.

[@larryplatt123]

5150 MotorSports you want I start at the top, otherwise overspray lands on your dry paint

[@czthor1]

So you dont have to buy there color you can use any color paint to tint the coat?

[@5150MotorSports]

Yes, you buy there tintable kit, meaning you add your color.

[@julianj.aguilariv9785]

Awesome video. If you look VERY closely near the neck, just above the hardener fill line, there is a light ridge indicating the tint fill line. No need to double poor.

[@guillermovazquez2441]

The final color is identical like the chooses color or change?

[@guillermovazquez2441]

Selected

[@5150MotorSports]

Hi GVS, we used the identical paint to match the Jeep, came out great!!! Thanks for watching and please remember to subscribe…

[@robertthomas8448]

i like that rough look and the color also

[@5150MotorSports]

Robert Thomas Thanks, we are real happy how it turned out. Thanks for watching...

[@jjaronske6445]

Almost looks like aok hills/ pinions hills area?

[@5150MotorSports]

Good Eye, Piñon Hills. Thanks for watching.

[@jjaronske6445]

@@5150MotorSports I just scored a 2001 XJ. I'm gonna go with forrest green bed liner and looking at motivation videos. Grew up in Big Bear. Graduated HESPERIA HIGH. I know them there foothills VERY WELL.

[@masonlong666]

What tool was used to trim fenders? Looks like it did a clean job

[@5150MotorSports]

Hi Mason, its called a nippler anf workks great on sheet metal. Harbor Freight has them fairly cheap.

[@JoseOrtega-xn4mj]

Can you mix 2 or 3 bottles to be ready or not recommend?

[@5150MotorSports]

I don’t see why not, but very easy and quick to mix. Thanks for watching.

[@tonykrempin7259]

How does it look after 4 year? Sun fade? Peeling? Would you do it again?

[@MJJCvideo]

@5150 MotorSports Good repairing video,may I know if it's ok for you to review our foam cannon S V3.0?Thanks in advance!☺

[@richardwatkins9496]

@30 seconds how’s was that metal sheet created to fit the rear quarter panel contours ?

[@5150MotorSports]

Hi Richard, we usd Rock Armor rear corner armor. See link below… Thanks for watching…. affordableoffroad.com/shop/rock-hard-series-rear-body-armor-with-rub-rail-jeep-cherokee-xj-84-01/

[@adamscott3619]

did you notice any of the overspray on your house?

[@5150MotorSports]

No, none at all…

[@foeeseauau8510]

Your supposed to stay 14 inches away but sometimes you got closer my question is how did the texture turnout?.

[@5150MotorSports]

Foeese Auau thanks for watching we wanted less texture, which you can control with your air pressure and an adjustable tip came out great!!

[@foeeseauau8510]

@@5150MotorSports I see so closer and tip pressure gives less texture I'm thinking doing this.

[@frankmancuso4065]

Hi and thanks for the reply , I actually did find it on amazon and bought it as well , Thank you!

[@j.dominicpitre2533]

I'd be curious to see how much more heavy it is.

[@5150MotorSports]

The kit in the box around about 5 pounds.

[@MaxMax-th7uz]

Can any red car paint be added to tint ? i.e , 2k straight red or. Base coat red ?

[@5150MotorSports]

Yes, just make sure it an automotive type paint and ask the paint shop not to add any binders. Thanks for watching…

[@ratchetboo]

What psi do you recommend?

[@puleking8093]

Keep filming this videos i love to vatch respect

[@5150MotorSports]

PULE KING Thanks

[@Kennykoo65]

Love the jeep and color. I just Raptor lined the interior of my 98 TJ. Had trouble finding tint. Curious as to the type of paint you used...just water based valspar?

[@5150MotorSports]

Thanks for watching, we used Valspar Basecoat LBVR100 series and had the automotive paint store not add any binders when they mix the paint.

[@mitchellscottmoreau]

Is the gauge on the sprayer that comes with the kit adjustable for PSI or do I have to adjust my compressor?

[@VivoPaContarlo]

Which red is that one? Hot rod red or blood red?

[@5150MotorSports]

Thanks for watching, it’s called Colorado red.

[@dominicborchmann68]

where do you get the paint from? i need to get some painted match to my xj and i’m not sure where to get it from and what type of paint i need. mines not a factory color btw

[@5150MotorSports]

Hi Dominic, Thanks for watching… Visit your local automotive paint (PBE) supply store, and they can help you color match. RAPTOR is compatible with any solvent based color, including 2K acrylic solid color and mixed acrylic basecoats, and can be added up to 10% by volume (ask your paint supplier to leave out the binders if possible for best pigment density). NOTE: Acrylic basecoat toners tend to have high color strength so use sparingly (less than 10% tint by volume). RAPTOR cannot be used with water based, polyester, or enamel paints.

[@dominicborchmann68]

@@5150MotorSports thanks you so much!

[@5150MotorSports]

@@dominicborchmann68 have fun take your time it’s worth it…

[@markmahecha8974]

You should make a video of you guys painting the Toyota pickup

[@mndzmkl]

Thanks for the video, it turned out great. My XJ's paint is pretty faded and developing a ton of paint chips, so it's time to repaint it. I was gonna go a cheap paint job from Maaco, but this is much more affordable, and I'll end up getting results I'll be happy with.

[@5150MotorSports]

Raptor Liner is a great option and great for DIY easy prep. Looks great. Thanks for watching. Next month we’re going to be doing a CJ7 in Hugger Orange.

[@alexanderaguila3375]

I love that Colorado red 🎈 , where I can buy it from ?

[@5150MotorSports]

Thanks for watching, any automotive paint store. Colorado Red is a stock factory color.

[@Farmor4x4]

I recommend you paint the front grill raptor black, to this date is the gloss glossy or dull? does the dirty stick a lot?

[@JoseOrtega-xn4mj]

Is this the first time you do this? If so good job 👏 I’m going to do my Dodge Ram 2500 and watching as many videos as I can. Any regrets or recommendations? Thanks 🙏

[@travelacho]

Very cool video, thankyou

[@rgsrails]

Looks great guys! My only concern is that the rough surface won't allow any gaskets for the mirrors, door handles, locks and any other surface contact gasket to seal properly allowing water to seep past them. Did you smooth out those surfaces or used some kind of filler to make a smooth surface for the gaskets?

[@5150MotorSports]

Thanks, the Raptor Liner it not super rough, and I don’t see any issues of water sipping. We have pressure wash the Jeep several time and no sippage anywhere. It your concerned you could alway use some type of waterproof caulking under and inside the door handles and Mirrors..👍

[@frankmancuso4065]

Hi hey got my bronco 2 painted but need to touch up can you just shoot over the dried raptor or what cant find anything on the recoat, thanks in advance frank

[@5150MotorSports]

I’m not 100% sure, my guess would be to sand and scotch bright the area needed repairing and then Reapply raptor liner.

[@jackiecarpenter7747]

What size compressor could one get away with?

[@5150MotorSports]

Hello Jackie, Thank You for watching. I’m not sure, we have a good size compressor 5hp/60 gallon which I’m sure it way over kill.

[@jackiecarpenter7747]

@@5150MotorSports I was thinking maybe 10 to 20 gallon

[@michaelrudisill897]

I know it's hard to see on cameras but did it have any dull spots or tiger stripes?

[@5150MotorSports]

Not really came out very nice...

[@michaelrudisill897]

Ok cool, thank you for the reply and the info. XJ looks awesome.

[@hunterstafford4038]

Were you able to get full coverage with 1 kit?

[@5150MotorSports]

We used 7 liters, about 2 kits. Thanks for watching.

[@hunterstafford4038]

@@5150MotorSports good deal. Thanks for the reply.

[@rickss69]

How does it look today? Any fading?

[@5150MotorSports]

Holding up great!!!

[@frankmancuso4065]

How often should you clean the gun , seems people have a lot of problems with this and whats the right thinner to use , I`ve seen conflicting reports on what thinner to use , and as before Thank you in advance.! Frank

[@5150MotorSports]

Frank Mancuso I use lacquer thinner to clean the gun when I’m done spaying the vehicle.

[@TBUCKETMAN]

Did you clean the gun when you went to mix the next bottle?

[@frankmancuso4065]

@@TBUCKETMAN I didnt , I shot 5 bottles with no problems , the caveat ,I bought the raptor gun which I think gives a better pattern I shot the smallest stipple or setting 2 turns out . wish I could post a pic came out better than i thought it would Frank

[@TBUCKETMAN]

@@frankmancuso4065 frank thank you for the fast response, I got the same gun, just trying to get the most info I can before I jump in it, I hate to say it like this but it’s easier to learn from other peoples mistakes:) I think yours came out awesome.

[@frankmancuso4065]

@@TBUCKETMAN I`m like you I asked 5150 MS and got my information from them but I did learn a thing about recoating or touch up if you will , after its done drying and you want to recoat , you have to use those scotch brite pads the red ones rerough the surface lightly and reshoot , also I used my compressor and got that light dust off before hand , 1 last thing they have the red jeep , I have a 1987 bronco 2 I shot it with Mesa grey raptor and black raptor on my mirrors , bumpers and grill . I bought James Duff bumpers . Have a nice day Sir frank

[@outdoorsmansgarage]

Looks good guys Nice job! Was the Colorado Red color just a little bit of regular paint. You guys have a new sub. Good job guys.

[@5150MotorSports]

Thank You, Yes we used 2 oz of Colorado Red paint..

[@Farmor4x4]

How many bottles are enough to paint a Chevrolet Silverado double cab pickup? dark gray,

[@5150MotorSports]

Parachoques y Mecánica Farmor We used 7, on the Jeep Cherokee, I would guess around 10. Thanks for watching.

[@tcreed1143]

Looks gd , I should do tht to my F100 72 ford and don’t have to worry about starch or chips ...👍

[@howardbuscemi6573]

Amazing job!! if u don’t mind telling, which air compressor u used to get the job done?

[@5150MotorSports]

We have a Ingersoll Rand, 60 gallon... You don’t need one this big. ThNks for watching .

[@dginta7932]

Nice video. Sorry if I missed it, but how big of a compressor do you think is necessary?

[@5150MotorSports]

Hi Ginta, Thanks for watching, we used a 60 gallon 5 HP compresser. I’m not sure what the minimum CFM rating would be.

[@Farmor4x4]

what color do you use? Doesn't the color come ready? If I want the dark gray color, will it come from the factory? The compressor used is of how many horses and the air reserve tank is required of how many liters? And finally, how many PSI should be worked to paint with the gun sent by the raptor company?

[@5150MotorSports]

Parachoques y Mecánica Farmor it’s a stock Jeep color called Colorado Red. I Used the tintabe Raptor meaning you mix it with what color you want, I believe they do offer, black, white and grey. I used 7 Liters of raptor liner and sprayed between 60 and 70 psi.

[@311mdub]

Is there a guide or manual as to how to tint or color the liner?

[@5150MotorSports]

Yes, on Raptor Liners web site. It very easy to work with... Thanks for watching.

[@Farmor4x4]

ready suscrito. like i love your channel

[@5150MotorSports]

Parachoques y Mecánica Farmor Thank You!!

[@Farmor4x4]

What would happen if it had rained that day, if it got wet the work would be damaged?

[@KaffiRawr]

Yes. Any water during the painting process will damage the paintjob. The paint dries in a few hours. It takes 7 days for it to fully harden.

[@simongray6572]

How many litres of raptor for the whole car?

[@5150MotorSports]

We used a total of 7 liters. Thanks for watching.

[@rickstir7144]

No offense but this is the epitome of "polishing a turd" looks good though! Great job 👍🏽👍🏽

[@5150MotorSports]

rickstir71 rickstir71 thanks for watching...

[@Captain-Awesome]

rickstir71 rickstir71 Says the guy with a Teddy Bear for a thumbnail. Cute Bro reeaall cute. It’s not spending 4K on LineX!! It’s spending a couple afternoons and a few hundred dollars. I say Job Well Done!!

[@rickstir7144]

@@Captain-Awesome why so sensitive? Either we need to change your tampon or menopause has kicked in for you....

[@gagacrazy10]

rickstir71 rickstir71 nah man xj’s are pretty decent actually. Tough as nails and very good off-road 🙂

[@spencerchronicles301]

How many bottles did you use to do the whole vehicle?

[@5150MotorSports]

We used 7 bottles total... Thanks for watching.

[@josiahburns4262]

Question: Could you not mix up one larger batch to just refill in between? Unless I missed that, seems like I would have the potential of getting two different shades. About to do this to my truck and wondering.

[@johnjude2685]

Surprise you spay bottom areas first,is that recommend? Hopefully do my Ranger bed and bumpers Thanks

[@5150MotorSports]

John Jude, just how we decided to start... good luck on your Ranger..

[@hongmihnhahn7081]

What color were you using?

[@5150MotorSports]

It the stock jeep color for that Jeep, it's called Colorado Red, Thanks for watching.

[@HouseofHemi]

Did it fade to pink yet?

[@5150MotorSports]

No!!!! Thanks for watching…

[@Colby83]

Do you have to clean the gun between each bottle?

[@5150MotorSports]

No, just when your done with the paint job. Thanks for watching...

[@Colby83]

5150 MotorSports thank you

[@robertking4220]

why didnt you keep back some of your thinners to wash the measuring cup out then add that to your pot

[@5150MotorSports]

Robert King Raptor Liner does not use thinner, just hardener. Used lacquer thinner for clean-up..

Fortunately the second pass was done with way more consistent strokes. It ended up well :D

[@5150MotorSports]

Iñigo Zapata Thanks for watching, it did come out great, our fiat pass was a sucky for a tack coat. We’re getting ready to do another Jeep CJ towards the end of summer.

@@5150MotorSports I'm going to Raptor my XJ before the end of the month, so all these videos are very helpful. Thanks!

[@chrischapman7657]

How many hours would you say you had tied up in bodywork, masking, paint in all

[@5150MotorSports]

I say around 30.

[@chrischapman7657]

Was the body in pretty bad shape? Sorry if I missed this part, I'm new here, but will definitely be subscribing!

[@5150MotorSports]

@@chrischapman7657 We had to replace the passenger fender, trim both front fenders for more clearance for the 35" tires. Hood was fairly wavy which took most of the time. I say around 20 smaller dents and door dings, nothing major. One of the benefits to Raptor Liner it hides lots of the smaller imperfection that world show up in high gloss paint. Thanks for subscribing it's very appreciated. :)

[@WagsAutomotive]

I thought you were supposed to prime it first? And wait an hour between coats? How is it holding up today?

[@5150MotorSports]

All bare metal was primed with red Oxide primer and holding up great, Thanks for watching.

[@revosven]

How many bottles did you end up using in the end? Wondering if I can get away with the 6 bottle kit?

[@5150MotorSports]

We brought 8 total, but used 7 total.

[@jamiebarrette3630]

How much for the 80s Toyota pickup in the background? Nice raptor line tutorial 👌

[@5150MotorSports]

Sorry, not for sale Thanks for watching.

[@talleydawkins629]

the jeep and the whole back drop look like real life GTA

[@jaredalexander3403]

Lol wym back drop, an do you mean gta the game?

[@gagacrazy10]

Trevor would be proud of the Jeep 😁🤙🏻

[@ben3462]

What type of paint color did you use acrylic?

[@5150MotorSports]

Reuben Perez Yes... For best results, use solvent based acrylic basecoat toners (ask your paint supplier to leave out the binders)

[@ben3462]

@@5150MotorSports ok I will do that thanks

[@housemachine509]

When you spray each label do you outline at the door jamb then fill them move to the next one? Theres no build up where you start and stop? Just keep a wet edge yes and 50% overlap?

[@reebertJunkman]

SUPER GREAT VIDEO... How good a painter does a guy need to do this, can a NEW BEE with a lot of rattle can experience do this? I have a good compressor....

[@elcazador6198]

Great job guy's! Little bit of overspray in the toyota,blue car,white truck,26ft trailer and don't forget your neighbors roof.👍but I liked the video.

[@shanerobinson6776]

Nice arch kit would set it off 👍

[@swav100]

Where did u get that spray gun

[@5150MotorSports]

swav100 we got the Raptor Liner Adjustable... www.amazon.com/U-Pol-Products-Raptor-Adjustable-UPL-UP4880/dp/B073V7N7JF/ref=mp_s_a_1_3?keywords=raptor+liner+gun&qid=1582271635&sr=8-3 Thanks

[@keithlea6804]

How many cans of paint did you use? Cost? Have a 96 Cherokee and need to spray the area where the plastic was and my Bush wacker flairs. Wouldn't mind doing the whole thing. Same red as yours. Great video liked and subbed

[@5150MotorSports]

Hi Keith, Thanks for the subb... We brought two kits, each kit has 4 bottles. We used a total of 7 bottles, which leaves us one for any touch up that maybe needed in the future. Bought the kit from my local automotive paint supplier and paid around $150.00 per kit. You can find the kits cheaper on Amazon. I have provide a link below. If you have any other question just let me know. www.amazon.com/Raptor-Tintable-Urethane-Custom-Regulator/dp/B074KPF5X9/ref=sr_1_1_sspa?crid=3DDPFKJC83X6U&keywords=tintable+raptor+liner+kit&qid=1571503588&sprefix=Tintable+Raptor+liner%2Caps%2C185&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyS0JFVkdMODlTQ1I4JmVuY3J5cHRlZElkPUEwOTY2NjI3MUo3Nk5FRzgyVExHViZlbmNyeXB0ZWRBZElkPUEwMTIzMDY0MUFQWTU4RktFT1I5TSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

[@mikep3322]

How much raptor did you use on entire vehicle sir

[@5150MotorSports]

Total of 7 liters...

[@turdferguson4602]

I downed a few and smoked a fatty while putting this stuff on. Just do the prep right and it’s hard to screw up

[@williamgist722]

My job came out with some parts shinier than others. Any tips on how to fix it?

[@5150MotorSports]

Sorry, really don't know. Maybe someone will chime in... :)

[@StefanMaks]

Hello, how bottles raptor you are spend on these jeep? Thank you...

[@5150MotorSports]

We used total of 7 liters of Raptor Liner... Thanks for watching...

[@JesusMartinez-fr6bo]

Hows it holding up? Would i be able to add a gloss to keep it shiny?

[@5150MotorSports]

So far great... I’m not sure about adding gloss, maybe someone can chime in... Thanks for Watching...

[@xLopez210x]

I was thinking about doing this to my YJ but I was confused as to how to add my own colors because their website has pre-set colors. Can you specify the kit you used from them?

[@5150MotorSports]

Thanks for watching, you need to get the tintable kit and add the color you want. It’s fairly easy just take your time. www.amazon.com/Raptor-Tintable-Urethane-Spray-Liters/dp/B01CKE7M7M/ref=mp_s_a_1_1_sspa?dchild=1&keywords=raptor+liner&qid=1588574615&sprefix=rapto&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFWN0pDWVFCVVczRjImZW5jcnlwdGVkSWQ9QTA2MTgzMjZFMTFZSVNKRElKMlomZW5jcnlwdGVkQWRJZD1BMDE1OTIwMTJESjlOU0ZOVzlMSlEmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

[@constructiontech1970]

Have you noticed if the raptor liner has deadened road noise?

[@5150MotorSports]

We have not driven it to much yet as were installing new carpet. I'll report once we get it done.

[@likebarter2130]

Looks nice. At 17:49-17:50 you, “She’s all Rhino Lined.” Whoops!

[@halholloway6902]

Anyone know how this paint job is holding up?

[@5150MotorSports]

We sold the XJ a while back, but was holding up great!!!

[@halholloway6902]

I have been wanting to paint mine the same color and I was wondering if the red faded fast or not.... Thanks for the reply 👍