denture self adjustment tools

[@centahaba]

Thanks mate, I really appreciate your help. New dentures are killing me I'm sick of going back and forth to the dentist. I'll take that into my own hands like you did!

[@yourfavoritedenturewearer]

Just be careful not to do too much at one time, in this case more is not better. Just make a slight adjustment and wait a few days to see if it's better it will take a few days for a sore to start healing

[@kandacepatterson7965]

Even a finger nail file works in a pinch.

[@fredhartman1325]

You have helped so many people, and want to thank you for the amazing help you provided me. I bought the Harbor Freight version of Dremel for $10, which included several of the stone tools. I have done wonders with it, and doubt my dentist office could have done as well. I have made nearly 20 adjustments on my own, taking it slowly and carefully. I had a very ill-fitting mess to start with on the lower denture. I went to one of those "affordable" denture places, and would never go back. Dentist hardly did anything, leaving the job to the technicians. Every time I do an adjustment it gets better, and am about 90% there, starting with zero. I didn't wear the lower denture for months when I left the dentist office, and your video showed me what to do. Just go slow and see where it hurts, take a little off, and see how it works. I made an adjustment and wouldn't do another until I ate with it. Then I knew where it needed to be trimmed. Thank you!

[@yourfavoritedenturewearer]

I'm very happy the video was helpful and your dentures are fitting much better

[@teiiteiibracely101]

Thanks for your tips im going for the adjustments myself 😊😊

[@fredhartman1325]

I probably ended up doing 35+ adjustments, and got it to 100% perfect. Haven't had to bother with it the past several months. I do use adhesive, but doing the adjustments myself was a game changer. I haven't been back to any dentist since I got them, now about 14 months.

[@dealecrabr9425]

having started out as a machinist i have some little tricks with this, get the cloth polishing wheel for dremels, smear a little arm&hammer tooth paste on the area that was just ground down, lightly blend to a mirror finish, this is more for better surface area contact and suction, also this helps with microscopic trash sticking

[@yourfavoritedenturewearer]

right on nice to know that you for sharing.

[@kandacepatterson7965]

Thats awesome!

[@ClairettaAnderson]

I, actually, used some fingernail files to smooth out my, older, lower denture. I removed a tiny amount of one side where my gum was super painful. It made all the difference in the world. My bite is even normal again. Thanks.

[@yourfavoritedenturewearer]

yup a fingernail file works well also as long as you can reach the area with it.

[@ABN6565]

Thank u very much. I been to the dentist 6 times and I have the same issue in 2 areas. I met a lady in there who told me less is more. The less you can take off to get more relief is good. Then she told me try not to make all your adjustment in one day because you want them to be snug and fit, not loose. And by the time you get done adjusting they won't stay in at all. I didn't know what bits to get, but I do now, thanks again. 👍

[@yourfavoritedenturewearer]

Good luck and yes just a touch at a time because microscopic changes make a huge difference.

[@Suuegrl]

Thanks, had my dentures for over 20 yrs, love them. Had mouth cancer surgery and after I healed, they did not fit again. Going to try this! I so want to smile again. Hope you took down the back more for suction, I had mine done, couldn't wear them from the get go, gag reflection.

[@yourfavoritedenturewearer]

I never could get these dentures to fit correctly and since they were injection dentures and not actual acrylic dentures I couldn't get a single denture lab here to work on them, so they never did fit correctly, I ended up donating them to a place that makes denture products so they can use them for testing different products on them, I went back to using my original dentures which still fit like a glove.

[@debbietucker9812]

Great video 👍🏻 I also like to use a eyeliner pencil, when I have them in my mouth. I can mark the spot close to where it’s rubbing and when I take my denture out my mouth I can see the spot where the issue is. Then I can file it down.

[@yourfavoritedenturewearer]

that is a great idea also it makes sense to me.

[@debbietucker9812]

I also have a bag I carry all of my items in. I have a little flashlight, nail file, small pair of scissors and cuticle scissors for when I do my DenSureFit fit Application. It makes it so convenient when I have to travel.

[@CucufahKoKo4593]

I love you for this! I've had my dentures for months, they hurt from the start so I never wore them. I've been gummy since January and I wanna smile so bad, my job requires it(a smile) my personality covers the top so no one noticed. Going to the denist to adjust them every week was not working... I bought a $5 nail filing drill after watching this video and I'll be damn it worked so good! Today, I showed my dentist what I did...lol, he was shocked yet extremely impressed. I can actually wear them now. Still some adjustments to do but YAAAAAAAAAS!

[@yourfavoritedenturewearer]

right on I am very happy you were able to adjust the dentures and be able to wear them that is awesome, now you can smile all you want even when you're not at work...lol

[@MKSDesignss]

Ahhh, it's about time someone did a video on adjustments! I think there's some that have mentioned it, but no one has shown the tools (that I can remember), and detailed instructions and recommendations! Thanks!

[@yourfavoritedenturewearer]

you are very welcome, I just don't want people messing up the dentures and taking way too much off them for sure, these tools are great because they take very little.

[@somerking7040]

Yes!! I can't believe I found this video. Came out of the dentist a lil disappointed yesterday and told my Aunt ( I just don't feel like they want to actually file it down the way I'm comfortable with it ,idk why but if I have to ill do it myself). Of course,we both thought that was wishful thinking....And then I found this❤.. Sharing this with my Aunt now ,lol.. Thanks!

[@karenadamson5656]

Hi, love your posts, I’m in New Zealand and always had issues with my dentures. I recently had them relined, and as my gums are so sensitive, I mentioned this to my Dentist, asking him if he could put a silicon liner inside my dentures, and they feel just like denture fit, but it’s permanent, no having to reline them every 4 days, if lasts as long till your next reline, as our gums are always getting smaller with age. They feel amazing. There was too much of a gap for adhesive to work, and I hated using glue anyhow. Just thought this would interest a few people. They’re so comfy now, and finally suction in.

[@yourfavoritedenturewearer]

I'm glad you were able to get a good reline on the dentures

[@tincat2173]

Thank you for making this video! I see that you’re struggling with your dentures. Watching you tells me that you need to find a denturist who has a good education and knows their practice. He or she can correctly build you another set.

[@yourfavoritedenturewearer]

This was a mail order set and they were a gift. However because they were not acrylic no lab in town would touch them so I just gave up on them and went back to wearing my good old acrylic dentures that I had since the beginning.

[@sharrell64sh]

Yes. You helped. I just got the exact same set of tools from Harbor Freight a couple of hours ago. I'm about to start adjusting my same day dentures before my gums fall off. I've been shot, stabbed, and cut by countless tools, but this HURTS!

[@yourfavoritedenturewearer]

Remember that you really should go back in for an adjustment, however if you do it yourself, take very little at a time then wear the dentures for a couple days and see if the sores begin to heal. It takes time for sores to heal even after the dentures are not rubbing that spot any more.

[@Michael-jv2cn]

I just got uppers a month ago and was having the same trouble you are. It's getting better and my speaking is better. I only get 1 free adjustment so this is very helpful. I already took an emery file to the slit. That is what is most sore to me.

[@yourfavoritedenturewearer]

Right on. I've never heard of only getting one adjustment before. My dentist adjusted my immediate dentures about ten times for me.

[@Michael-jv2cn]

@@yourfavoritedenturewearer yes i wasnt happy about him saying that. But they had just reopened after they shutdown. I wont go back after the adjustment.

[@LarryTalbot_1313]

I think my dentist used a grease pen to mark where it needed adjustment on mine. And then he just adjusted it with something that looked like a Dremel tool on a long flexible shaft. So I think you are definitely on the right track. And just in time too. My upper is biting into my left side a bit to the point where it hurts after every time I eat something. I might have to suck it up and adjust it myself. I sure hate to pay a small fortune for 2 minutes in a dentists office! All that suction trouble gave me flashbacks. Its seems like its like learning all that, all over again. Another great video!!!

[@yourfavoritedenturewearer]

I really had a lot of flash backs from that all the frustration and anger that I went thru when I first got dentures came rushing back into my brain and I had to be careful not to loose my temper right there on camera...lol

[@musicandmania]

just found your video, thank you so much. i have dentures, i'm 28, and my immediates dont fit at all but no one will fix them or attempt to fix them. it's been a hard 11 months of wearing them!

[@yourfavoritedenturewearer]

immediate dentures suck for everyone believe me it's just not easy the first year with dentures, after that when you get the perm dentures or the perm relines done things will get much easier for sure.

[@xaosnox]

Thanks for another super useful video! I also had trouble with gagging and getting suction on the top plate. (It was giving horrible headaches, too.) W kept taking acrylic off the back, but it turned out it was the front. We took about 7 mm off the front and it alleviated everything. The nerves in the mouth are very strange and can be deceiving.

[@yourfavoritedenturewearer]

Glad it helped! Nice work figuring things out

[@klh0920]

Thank you for the tip! Your denture looks so thin, I hope to one day get one that looks so thin. Im a week in and I’m feeling bulky. Did you get yours from a private office?

[@wduke76]

Thank you so much for this and your other videos. They really help me to understand what I will need to gather to work on my dentures when I get them.

[@yourfavoritedenturewearer]

right on glad I could help.

[@mystra13]

Perfect! To start I'd actually picked up a nail dremel that's so weak I can stop it with my finger. Then I moved to the same Drillmaster when I was more confident. My grandmother did acrylic pictures with a dremel when I was a kid so I had a bit of knowledge on what not to do. Still took awhile to get what I needed though. As you said, the tiniest adjustment can make the difference. It's always better to make tiny adjustments and wear for a few days to see if you need to do more.

[@yourfavoritedenturewearer]

Agreed better to make small adjustments each time instead of taking too much all at once

[@ericjhannah]

You are right on point with everything you said here. Keep on passing the tips Bill. Last time I spoke to you, you had said that you were moving from Colorado to Utah. Anyhow just wanted to see how life is going man. Good to see you on here still. Take care Bill.😀

[@yourfavoritedenturewearer]

it's been a while since you commented for sure, yes I got moved in to my brothers house, been here a year now and things are going great. I love doing what I am doing and I really like being here for sure. Hope everything is going well with you also.

[@darlin1951]

Bill, Desurefit comes off the next day, from my RKs, but have been floating it back onto upper with running tap water and that seats the sheet of silicone back on perfectly. Gotta have it for comfort sometimes. Get good suction too.I soak the Desurefit sheet right in the Polident Whitening along with the dentures. I am going to sleep in my RKs tonight and see if that helps with "my lisp", dag nabbit! That lisp bugs me.

[@yourfavoritedenturewearer]

When I first got my hard reline I did sleep in them for a few days, but I would take out for a few hours every day.

[@donnamarie22164]

Thank you so much for this video. My dentist really does not like to do adjustments to my liking so I am going to give this a shot.

[@yourfavoritedenturewearer]

Please make sure that you don't ruin your warranty on the dentures, most dentures when you first get them have a warranty and if you do your own adjustments or things like that they will be canceled.

[@donnamarie22164]

@@yourfavoritedenturewearer I will definitely check on any warranty I may have. Thanks

[@dannettepeters1507]

Thank you very much for this video!! Off to go drumil shopping. Cheer up love, you look a little exasperated today. I KNOW you will figure out the gagging and suction problem!

[@yourfavoritedenturewearer]

the gagging is not really a problem its' just because the denture is not fitting correct at this point, once I get it fitting right it will stop for sure.

[@johnny30806]

If you have dentures and you do the procedure, Remember DO NOT over heat the denture. grind a little cool it off with water

[@yourfavoritedenturewearer]

yes you are right ,

[@ladye8686]

Bill thank you so much for the insight into the little stone tools I would have never thought of that again you come to the rescue thanks. Please let us know if you're successful and getting the suction fixed in your upper denture and how you do that I hope that that something is achievable by you at home. I'm sure and you don't want to use densurefit this quickly after getting your new Dentures or do you just a question I thought I would ask. I imagine that densurefit is more a fine-tuning aid but you need the initial suction first if that makes sense. I know how maddening it is that my Temporaries can't get any suction now without adhesive..... so I'm sure the frustration is tenfold on a new set of permanents. take care bill we'll keep watching!

[@yourfavoritedenturewearer]

I can't use the densurefit right now because these dentures are just way too tight to begin with, that is why they are causing so many sores and things. However I will be using it once I get the dentures to actually fit because I like that tiny bit of cushion I get from it as well.

[@ladye8686]

@@yourfavoritedenturewearer oh that's right I remember you saying how tight they were see I'm just still a newbie learning everyday good luck with the adjustments!

[@pamelawoods7185]

@@yourfavoritedenturewearer this is were I'm stuck! I love Dr. B's Solutions and Adhesadent is the only adhesive I'd ever use at this point. I can not stand adhesives in general and can't use them because of the ingredients in most. Lol! I want my DenSureFit! I want it NOW! Lol! I want the sealed suction support and ability to remove and put back in as often and frequently as I wish! I want it in mine for the comfort and ease of eating because of the gasket cushion effectiveness! I want it for the CONTINUALLY EVEN SUCTION SUPPORT provided! As I get headaches from the suction pressure changes throughout the day. Because my gums stay plump and normal with DenSureFit! I don't experience the dehydrationing shrinkage and then need plumping of the gums caused by adhesives choking off the oral tissues. Here's where I'm stuck... Just like you I don't like adhesives at all! And I don't like hard on hard! Now, I don't have any sore spots and everything fits extremely well so my provider wants me to get use to au natural! Hard on hard, Just me and my buddy... I on the other hand want the consistency of form, fit and functionality that only DenSureFit or silicone tissue conditioners can provide. I have been trying it his way since Oct 1st. here I am at Nov 16th and I still want my DenSureFit! I don't know if I can wait until Jan. What to do....

[@yourfavoritedenturewearer]

well I say do what is comfortable for you simply because the dentist is not wearing your teeth and does not know how your mouth feels. I have tough as nails gums and can eat anything with out my teeth but having that hard acrylic on the gums all day makes them hurt and I will not put myself thru that every day to try to get used to it. some of us can never get used to that hard on hard and I will not suffer thru the headaches every day torturing myself to do so when I can simply use densurefit and be comfortable and not have that pain at the end of the day and not have the headaches either. Love me some cushion...lol But you have to decide if you want to do what the doctor says or go your own path, I normally say to people to listen to their doctor but most of them don't wear dentures and don't' understand what it is we have to tolerate every day

[@MWall]

Thanks for explaining the use of the dremel tool for making adjustments. Even better was your explanation about the stone tools. Mine came with the stone tools and some of the metal ones too. It also came with the grinder you warned about. I bought a dremel for future adjustments, and I was afraid of the idea of using it. I figured it was a good investment because I could also use it for my nails. Then I realized, I didn't even know how to use it for my nails, so even that was nice to see. This is similar to the story of The Princess and the Pea, lol I saw someone else coat the inside of their denture with toothpaste to act as a pressure indicating paste. Not sure if it really identifies the pressure points, but they use PIP's at my dentist's office, to identify the pressure points. I think the one my dentist used was a powder type.

[@dannettepeters1507]

What is PIP and where can it be sourced? Thank you!

[@MWall]

Dannette, PIP stands for Pressure Indicating Paste in dentistry. I don't know where to get it, or if it is even sold to the general public. However if you google Pressure Indicating Paste Dentistry, you will get some info. I saw a few websites previously, but it looked a little expensive for personal use.

[@yourfavoritedenturewearer]

I am happy the video was helpful for sure. I don't know what PIP is but one thing I realized is that if you take a dry erase marker and color the inside of the denture. when you put it in and bite down the pressure point will push it away from that spot so you will be able to see it.

[@dannettepeters1507]

@@yourfavoritedenturewearer Great idea; think I have some of those around.

[@MWall]

Yes, that is really the same principle, being able to identify the pressure point. I know what the PIP is because my previous denture adjustments took longer than my extractions. Thanks for the excellent video. The new teeth look good. They almost look like they were fashioned to look like your original pair. He must of viewed your videos for inspiration.

[@Ellie-dl9pr]

Is there any way I can shave the palette down because I can’t talk? I gag every single time. It goes to far to the back of my throat. Can you please tell me what kind of dremel tool you use? Thank you.

[@yourfavoritedenturewearer]

I would suggest going to the dentist for that, because it's a much bigger adjustment than I am doing here, a dentist will be able to asses how much they need to adjust the denture and do it correctly, remember if you do it wrong, and the denture don't fit correctly any more that would not be good. Don't take a chance just go to the dentist and let them do it for you.

[@ApostleRon]

I bought myself a Dremel. Sanded till my dentures didn't hurt as well as the palet so I wouldn't feel like gagging when I put my dentures in.

[@yourfavoritedenturewearer]

Right on good job.

[@GoFarFarAway.]

My lower gum part of the dentures are too big. I have gone for several adjustments, and still too big, I can't fit food between my back area to chew. Is it a good idea to purc hase a dremel and take off 1/2" of the part that sits on my gum? A little at a time ofcourse.

[@yourfavoritedenturewearer]

I would suggest for any major adjustments like that it's best if you go to the dentist and explain everything as comprehensively as possible and have them do the adjustments or possibly a hard reline to correct the denture. I only used this tool to make micro adjustments.

[@smokingunclefrank6037]

I just bought a Dremel tool kit for the same reason I saw that my dentist was using one to adjust my dentures so I asked him if I could do it myself of course he knows I'm a watch repairman by trade and am used to detailed work much more then grinding off a little plastic so he was fine with it it was getting a bit of a pain going back and forth to him BTW I just got my first set so there are some little adjustments that are needed bumps and things like your showing the set came with a bunch of fine grinding stone which I thought were perfect great video BTY thanks 😁BTY you have a new sub

[@yourfavoritedenturewearer]

right on hope every thing works out and just remember that a microscopic amount removed makes a huge difference.

[@smokingunclefrank6037]

@@yourfavoritedenturewearer Yep a little bit at a time that's what I'm doing

[@karenreed1565]

Just use a soft buffer attachment - use it very slowly and check it frequently because you can take too much in the blink of an eye! Those little stone tools as you call them are what is used for acrylic nails... and you can use the tool that looks like flannel fabric and that is safer!

[@yourfavoritedenturewearer]

It worked out fine. I don't put any pressure on it at all. And yes you are right, you can take too much in the blink of an eye

[@karenreed1565]

@@yourfavoritedenturewearer The flannel (not sure if that is what it is made of or not) are Dremel bits, but you can use leather ones as well - they remove minute amounts of material but they also polish the surface, because just the tiniest little rough place on your denture can make you crazy!

[@somerking7040]

Denture glue works wonders for top and that seems to be what u need and it will absolutely hold all day no problem. I hate to see someone that doesn't have top teeth issues bc i did for so long and then i didnt ans i couldn't believe it. ! But now i just got bottom dentures yesterday and they shaved it 4 times but acted like i was annoying them 😒. Seriously? So ,here i am. Like i seriously just need such a tad touch of an adjustment and they would be perfect. I believe i can do this myself. I just need to knw where to purchase these tools myself. Thank u so much. I had no kdea this was possible. U may be chanylife as we know it!! Bless u. And i hope u get things right with yours bc we all deserve a nice comfortable 😁

[@yourfavoritedenturewearer]

I got this tool from Harbor freight and it comes will all the little stones as well. By the way I didn't need adhesive on the upper, if you watch more of my videos you will see that I have been adhesive free for a long time, but this denture was not made correctly and just wouldn't stay in my mouth at all, so I ended up donating these dentures to a company that test's denture products and went back to wearing my old dentures which fit like a glove.

[@fstoplive1991]

Thanks Bill. Need to adjust my new upper. Like u can't be w/o dentures any longer than it took to get them. Off to harbor freight. Wish we could communicate in private

[@yourfavoritedenturewearer]

Just remember that taking a microscopic amount off will make a huge change. So do very little and then wear them a few days. Then if needed do again. Better to do a little at a time until it's right than to take too much off and not be able to put it back..

[@wasdnagel8125]

I had an appointment today to get my denture molds done. Extractions soon. Anyways I have extremely bad dental anxiety. They put the plate in to do the mold and I felt like I couldn't breathe or swallow and I started to panic, then they held me down which made it worse so I took both hands and tapped on the dentist's arms trying to convey that I needed a minute to collect myself. They ripped it out of my mouth and told me they would no longer be serving me. They asked me to leave when I tried to inquire about what was so serious that I had to leave they threatened to call the cops if I didn't go... I can't believe how poorly they treated me. This was at affordable dentures, I hope I can find a dentist who is better at dealing with folks like me because that experience crushed me. I've been crying all morning feeling like it's just hopeless for me but your channel brings me comfort and I wanted to say thanks for what you do.

[@yourfavoritedenturewearer]

call some offices and get an older dentist that has been doing this for a very long time, my doctor was 70 years old and very compassionate about my reservations and explained how long each thing would take, I too had a problem the first time they tried to take a mold, he quit and waited for me to collect myself and then told me to start counting in my head, one second at a time and by the time I get to 200 he will be finished, he was right and that kept me calm and I did not freak out the next time. He was able to get the molds he needed and then was able to move forward from there. Not all doctors care about you to them you are just another number. Get a small office with a dentist that will listen to you and understand your reservations. Hope that will help.

[@wasdnagel8125]

@@yourfavoritedenturewearer Thanks for replying I've called Aspen dental and explained my situation they said they will help me through the anxiety. I think they assumed I was a druggy because I am 29 have bad teeth and tattoos so they treated me like scum, little do they know I hardly take asprin. I sure hope so. Going on Monday wish me luck!

[@yourfavoritedenturewearer]

right on I wish you luck and if you just explain everything to them right off the bat they will work with you and that will be awesome, just don't give up no matter what happens.

[@DianeScotts]

@@wasdnagel8125 I would do a search on them and make sure no one is complaining about the office. I haven't heard good things about them, so check them out! I hate to think how much money I have wasted on lousy dentistry. :(

[@blakemama]

I had my molds done last Monday. I did not have the horrible experience you did. The man who did the molds, his name was Oscar. He was cheerful and went far out of his way to find a tray that was not too big for my mouth. I didn't feel choked or claustrophobic as I had when I had my partial made. It's the difference of a person who cared about me. I am very happy with my dentist. He's in his 60s. Oscar is in his late 50s. They've been together in the office for a long time. How nice it was to have Oscar singing along with the Christmas music on the radio while he held the trays in my mouth. I'm so sorry that office treated you so insensitively.

[@BritishAnts]

Ive used a nail file on mine, took a while but i was watching tv! Took some gag away!

[@yourfavoritedenturewearer]

right on I"m glad that worked for you.

[@amyuncaged]

I'm so tempted to get a top/bottom denture display from Russell Klein and figure out the customizing myself. I know it's gonna be a back and forth constant. It's so stressful. I asked him how do I measure my mouth for a display and he says he will do a different method (because I have a couple of bottom teeth that are broken down and says I would have to get a partial, but I don't want my jacked up tooth(s) in the mix w pretty teeth . I have a stone bit for my drill. .... I'm thinking I can fill in the void w denture fit and do a reline myself. Still researching and looking to see if maybe I can go that route. Thanks for the video

[@yourfavoritedenturewearer]

Right on. you have to remember that trying to put a denture over your teeth will cause you a tremendous amount of pain. The gums will give but the teeth will not, therefore all the pressure will be on just those teeth

[@amyuncaged]

@@yourfavoritedenturewearer yeah ..your right. I need to go get them pulled asap. Then they would fit a lot better too. Maybe I can customize as I go along

[@yourfavoritedenturewearer]

I think by the time you try to do all that you will be waisting your money and time and be even more frustrated. Get the teeth pulled the get a hold of, www.dentkits.com and see what they can do for you. They make you a proper set of dentures and they take payments

[@amyuncaged]

@@yourfavoritedenturewearer I literally have a tape measure in my mouth, about to purchase a R.K. display. IDK..I might just play w this instamorph stuff, call Monday about getting them pulled... FML! 😢😁😢

[@geminiwill2688]

Incredibly information. Thank you Bill.

[@yourfavoritedenturewearer]

Right on

[@ClairettaAnderson]

All I can find are 80 pieces set. I want one like you have. I don't need an 80 piece set. The price is good at Harbour Freight, though.

[@yourfavoritedenturewearer]

this was just part of the set I got it's an 80 piece set, this is just part of that set.

[@ClairettaAnderson]

@@yourfavoritedenturewearer LOL. Thanks. Yeah. I figured that out. I realized, when I got home and looked closer at the set, the ones you're showing are in the middle of the package. I got mine at Harbour Freight on sale for $9.99 plus tax, of course. I haven't used it yet. I'm glad I came back today. One other video shows him grinding dentures down and that scared me. But, if I want to wear my newer dentures, then I'm going to have to do what needs to be done.

[@standupman6422]

Can you sharpen the front 4 teeth (incisors, etc so that when you bite you actually cut the food, not really "grab and tear". That is a problem I have now.

[@yourfavoritedenturewearer]

it wouldn't be a good idea to sharpen the teeth because you could bite off the tip of your tongue and that would not be good, over time you will be able to bite thru just about anything you want it just takes a little practice and time and of course building up a tad more muscle in the jaw as well.

[@darlin1951]

Well I tried to sleep in them. Woke up clenching really hard. Coming to the conclusion that my allergies are causing my tongue to swell. Just recently found out avocados are kin to rubber trees. Had avacado in a green smoothie. Can you say "LATEX" ? Lost my left eye due to latex gloves during eye surgery at 12 years old. Nothing sticking to the nylon is a big problem for sore spots on lower which bone continues to recede. RK puts those 90 degree angles in upper and lower middles are a problem where the flesh squeezes into that tight space and gets irritated those sharp points too.

[@yourfavoritedenturewearer]

yes they are difficult to get used to for sure, they really squeeze the skin on the gums but I think once I get them adjusted they will be just fine. you may want to avoid eating avocados from now on. Sorry you are having some trouble with your allergies.

[@bexangbeatty900]

Hello. I have a temp top denture and I was wondering if I can with those tools and attachment bits be able to shorten the top palette portion so I can wear it and it making my mouth so full and large to the point where it causes my gag reflex, cannot take my meds or drink or eat because the middle portion is too big and large? Every dentist I have been to says that my mouth is so tiny like child size they could barely get the smallest metal molding into my mouth which ripped the corners of my mouth when they were trying to get a mold in it and they did not have a child mold plate instead so I have not been able to wear it at all. I need to cut away the middle length of the palette or roof portion of that top temp denture. Can I do this with those bits and the rotary tool? Also, if there is another bit I would need of a particular size and type and material of the bits. The denture is too large and I can’t eat but extremely soft foods which really there is not much to choose from with your gums becoming raw because you cannot chew food without the teeth/denture and therefore I cannot eat much at all so I was curious if this would work for cutting and shortening the length of the center palette so it does not rest at the back of my throat? Thank you for any help and suggestions.

[@yourfavoritedenturewearer]

I would suggest taking it back to the dentist and explaining the problem and let them do any kind of major adjustment like that. this is just to show how to do very small adjustment's to the denture.

[@easyrider4649]

You explain how we can use tools to make adjustments but how you know where on the dentures to make the adjustment at ? At the dentist office, they use a white paste to cover the denture and put it back into your mouth. Then the white paste would show where your sore spot is located on your denture. So what do you use at home for a paste to let you know where the sore spot is on the dentures ?

[@yourfavoritedenturewearer]

well I know my mouth well enough and how the denture sits that I just know where it needs adjusted. I don't need any paste to tell me where it hurts and where I need to take some off, however if you do need something like that you can just put some tooth paste in the denture and rub it around real thin and wait for it to dry it don't take long, then put the denture in and bite down and remove it again quickly and where the tooth paste is rubbed away is where you will do the adjustment.

[@easyrider4649]

@@yourfavoritedenturewearer Omg ! You a freaking genius !! I been racking my brain trying to figure out what to use... Because I just had 13 teeth pulled on Oct 31 about 2 1/2 weeks ago. My dentist office is clear across town and take me 30 minutes to get there. Tired going there every time my temporary dentures need a adjustment.

[@yourfavoritedenturewearer]

well just make sure that you don't mess up the warranty on the dentures if you do this at home.

[@easyrider4649]

@@yourfavoritedenturewearer ...I don't plan on telling them I made any adjustments.. :) .. And that tooth paste worked like a charm. I already made my adjustment, and no more pain.

[@yourfavoritedenturewearer]

right on I am glad the tooth paste worked for you, I came up with that idea looking at what the doctor was using and letting it dry and I tried it at home and sure enough it did the same thing....lol

[@davekimbler2308]

I’m new to dentures ( 2 weeks now ) I had problems getting someone to adjust them on my schedule so I whipped out my pocket knife and scraped little by little until they were comfortable ! I don’t have my permanent set yet ( they said 6 months ) but the question I have is how to remove the denture cream from your gums before going to bed ? And when can I say eat an apple or bit a steak or is that something I’ll never do again ? Can I have them permanently attached or do I need new ones for that ? They asked what color I wanted and I said COFFEE STAINED please ! Lol. They didn’t see the humor in that ! Thank you for your time !

[@yourfavoritedenturewearer]

the best way to get the adhesive out of your mouth is to use a soft tooth brush and very warm water, and just brush it away, also you will be able to eat a steak in time but an apple is a different story , not every one can do that, however if you check out my dentures vs food channel linked in the description I teach people how to eat correctly with their dentures and it's helping a ton of people

[@davekimbler2308]

@@yourfavoritedenturewearer thanks I’ll do that ! I’m able to eat meat in small pieces but not to bite it like corn on the cob ! Lol. This by far is the best weight loss diet I’ve ever been on ! Lol. I’m down 50 lbs in a year ( teeth were getting really bad ) plus gallbladder surgery ! Thanks

[@douglasball1216]

Bill Would The Denture Fit Help With The Suction Of Your Upper Denture So That It Would Fit Better?

[@yourfavoritedenturewearer]

Not at this point there no room for it yet.

[@douglasball1216]

Ok

[@TKD187]

For some reason I thought it would be a good idea to make my denture teeth sharper I just felt like they were very blunt, so I took my Dremel tool and took a little bit off but now I have a indention in the bottom and top. It did sharpen my teeth but now I have these intentions that are driving me crazy because they are Sharp I was going to take the Dremel tool and take it all the way down but I don't want to mess the whole denture up. Do you know of a way to make your dentures smooth again after making a mistake like that. I mean the chances are I will just get used to the way that it feels but these are my temporary ones so that's why I'm trying to grind and shape for when I get my permanent I will know exactly what I need

[@yourfavoritedenturewearer]

Believe it or not they were already sharper than your natural teeth were, it just takes time to build the muscle in the jaw for biting because it takes more pleasure to bite with dentures because they are not supported by the bone. However I would say leave them alone and when you get the perms leave them alone also, and just build up the strength in your jaw, it's much cheaper than messing up your dentures...lol

[@beachcovelove6924]

my new upper partial teeth have indentions and rigid surfaces. my last ones were 100% smooth. I can't stop rubbing my tongue over them and it makes me gag. is there a way to smooth the teeth???

[@yourfavoritedenturewearer]

They do that so they will look like natural gums, our gums aren't smooth either, you just have to force yourself to stop every time you catch yourself doing it, just like I had to force myself to stop flipping my bottom denture up with my tongue all the time...lol

[@TheNikilet2]

Where can I buy a kit like you show with all the different shapes?

[@yourfavoritedenturewearer]

I got this one at harbor freight, but they also sell them at Walmart, Lowe's, home Depot, ace hardware, and a lot of other places.

[@gizmo48401]

Sorry i do t know how to DM but i was wondering can we use toothpast on the dentures the idea of dish soap and other skin soaps i dont think i can do cause of tast and i belive mine will be acrylic

[@yourfavoritedenturewearer]

you will not taste the dish soap if you rinse it with hot water. it's no different than washing the dishes. you just hold the denture in your hand scrub it and rinse under hot water. you can not use tooth paste on the dentures because it 's too abrasive and will start scratching them up real bad and that will allow bacteria to settle into the scratches and you will never get it out of there.

[@gizmo48401]

@@yourfavoritedenturewearer lol ok dint evion think of that lol not thinking straight got momy brain im bottel feeding 2 baby kittens is just as hard as children!

[@joe9042]

I want to horseshoe an upper denture. I have a Dremel & all the burrs, what can you recommend for horseshoe-ing?

[@yourfavoritedenturewearer]

I would not horse shoe a denture, they have to make a horse shoe denture a specific way to fit you correctly, I'm afraid if you do it your self you will just ruin a perfectly good denture ..

[@stacycruz6953]

I went in for adjustment on one spot they put color in it and they found the spot without me telling them hardly it felt like it was here and it was over there

[@mickreaddin4979]

Where can you buy them from? I've looked on Amazon and only diamond stones etc are coming up.

[@yourfavoritedenturewearer]

I got these at harbor freight

[@mickreaddin4979]

@@yourfavoritedenturewearer Thank you for your reply, but unfortunately I live in the UK.

[@athomewithmelissa]

Bill did you do a video of you doing the horse shoe on your upper denture? I can’t find it

[@yourfavoritedenturewearer]

No I have never done a horse shoe because I don't want to ruin my denture, and because I don't have enough gum to wear a horse shoe,

[@denbighchic]

How do you polish the grind marks out of the outside gums

[@yourfavoritedenturewearer]

Honestly your best bet would be to ask your dentist if they can do that. Your dentures might be under warranty and you don't want to do anything that can void that, also all I have ever done is slight adjustments so I wouldn't want to give you bad information

[@crystalmckinney460]

How can I smoothen out the sharp edges on my bottom snap in. They are sharp and the dentist just isn't doing it. Mainly the part that is under the tongue.

[@yourfavoritedenturewearer]

You could probably do that but it's always best if you can go in and explain in detail what is wrong and have them adjusted, some times we have to explain things to a dentist as if they are a child because they just don't get it, since I have never met a dentist anywhere that wears dentures they really can not understand what we are going through, so I would explain to them that it needs to be rounded off so that it's not so sharp because its making the underneath side of your tongue sore, maybe then they will understand what you need done.

[@crystalmckinney460]

@@yourfavoritedenturewearer I've been back several times unfortunately in the last few months. He's over two hours away and doesn't see a problem.

[@yourfavoritedenturewearer]

I"m sorry you are having so much trouble.

[@crystalmckinney460]

@@yourfavoritedenturewearer I have 8 implants with snap on dentures so it's a bit different than traditional dentures. I got the ultra tooth implants which are pretty neat. Probably the best thing in this whole situation I'm going through. I have an appointment in a month with a new dentist so I'm hopeful she will be able to help me.

[@reidepe]

Bill, Does this work on plastic 'skirt' type denture? I have a back teeth partial that's too big, rubs against the flesh, makes me gag and falls off while chewing, and I'm thinking of "cutting" it off with a knife, sort of scraping off the redundant plastic that's making me gag . Probably not a a good idea, but would like your opinion.

[@yourfavoritedenturewearer]

I would not be able to tell you if this will work for that or not, simply because I am not familiar with the material used. I only know it worked for me, but honestly I recommend people go to their doctor to get adjustment done.

[@steewrat9708]

I heard using these kinds of things on your dentures removes the coating seal in that area. That seal prevents bacteria from getting into the denture material and causing problems... and so removing it is bad. Thoughts?

[@yourfavoritedenturewearer]

I did this to my other dentures 7 years ago that I still wear today, never have a problem, with that being said, I soak my dentures for at least 8 hours a night and that's enough to kill any bacteria that might on the dentures, In my opinion it's all about caring for the dentures correctly

[@steewrat9708]

@@yourfavoritedenturewearer right on. thanks for the reply and reassurance. i use Polident 3 min Cleanser every night so i think we'll be okay. I had to use a tool, my lowers were cutting into my gums because one of the edges was sharp.. i used a tool to smooth it out and its much more comfortable now.

[@yourfavoritedenturewearer]

I use the same tablets, because you can soak all night or just do a quick soak if you need to before going somewhere...lol I think you are going to be just fine, when the doctor does adjustments they don't re polish the dentures in those areas either, that would take much longer and you know how fast they get you in and do the adjustment and send you on your way...lol

[@steewrat9708]

yeah those tablets are very versatile. i love them. bro, thank you again for helping me feel better. I don't know if you realize the impact youre having on folks. a positive impact. i feel so much better now. my dentist has me in and out and i see other folks being shipped off as quickly. i might have to dull my edge more but my gums are getting tough. @@yourfavoritedenturewearer

[@yourfavoritedenturewearer]

you will get things figured out for sure, it takes a little time but you will get things figured out and become more comfortable with the dentures for sure.

[@dalejohns2758]

Where can I find that set of dremel grinding bits.

[@yourfavoritedenturewearer]

I got these at harbor freight but you can order some like them on Amazon

[@wbfd314]

My immediate top denture does the same thing I’ve been seven days now and I can’t talk because I gag the lower one has implants so I can’t wear it yet I’m just sick of the gagging

[@yourfavoritedenturewearer]

When I try to wear the upper by itself without the lower, I gag like crazy even today I have to have both dentures in or I gag like a mad man

[@rw3355]

Did you crack your knuckle at 5:01?

[@yourfavoritedenturewearer]

I may have cracked my knuckles...lol

[@LymeBabe4864]

I am in desperate need of help. I got my dentures online through denturebox and they give you an adjusting kit to do your own adjustments. The problem is is when they made my lower denture they closed off the back instead of it being open like the back of the top one. Now it's up to me to figure out how to correct this so they sit right on my gum. Can you please help me with this? Thank you for any help.

[@yourfavoritedenturewearer]

I would suggest taking them to a local dentist for adjustment if you can, I wouldn't be able to tell you what to do because I am not a dentist and I wouldn't want to be responsible for messing up your denture.

[@LymeBabe4864]

@@yourfavoritedenturewearer Ok, thank you. Denturebox just told me to adjust them myself and I wasn't sure how to either.

[@rosajones7878]

Where do I find the small hand-held electronic piece?

[@yourfavoritedenturewearer]

I got this one at harbor freight but you can get them at home depot or lowes also has them.

[@timprice5932]

Right on still our favorite it really helped. Thanks.

[@yourfavoritedenturewearer]

You are welcome..

[@Tata-iu3fy]

Does this void any warranty they may have?

[@yourfavoritedenturewearer]

it will for sure, that is why I stated that you need to see if you have a warranty before doing this because it will void the warranty.

[@Tata-iu3fy]

I didn’t hear that, I was watching this video with volume down low with captions. Thank you.

[@yourfavoritedenturewearer]

I didn't know they put captions on the videos that is awesome for sure...lol

[@alicebaker580]

how do you tighten the stone tool into the drill\

[@yourfavoritedenturewearer]

there is a little collar on the drill that you loosen and put the tool in then tighten back down, you have to push on the little button on the side to keep it from turning the motor as you do this.

[@mandownunder3600]

Tnx man.i need to know the tools

[@yourfavoritedenturewearer]

Right on.

[@ashleymartinez9635]

I got my top dentures Friday afternoon. They adjusted them a few times while I was there, I still wasn't able to fully close my mouth. I got home and I was able to really look at them, and the gum is too long. It pushes my top lip up and gives me "monkey mouth" but my gums, and the inside of my cheeks were bleeding. Before I left, they said they couldn't adjust them anymore, but they never took height off the gum. They told me I'll have to give them time because my bone is going to keep shrinking. But there is a small gap in the front part of the denture. My gum doesn't touch the denture in the front, because of the height of the gum. Would I be able to file some of that gum height down? I won't be able to even wear them the way that they are

[@yourfavoritedenturewearer]

Don't be filing on them because you will ruin the warranty. Yes they have a warranty on them all dentist that I know of do that. The denture probably isn't too tall but the fact that you now have something on the outside of the gum pushes the lip out and makes it look like you have horse teeth. I've done several videos about just that subject. Check out my play list first 30 days with dentures and I talk about that same thing in some of those videos.

[@ashleymartinez9635]

@@yourfavoritedenturewearer I had my extractions Oct 8th so it's only been a month. I put them back in earlier for a few hours, because I will just have to get used to them. They told me I have 100 days of free relines, and that was it. They didn't explain how to use the adhesive, which I don't need it right now, it's pretty snug. But I know I will when my bone shrinks more. They didn't tell me I needed to put them in water... Affordable dentures kind of sucks

[@yourfavoritedenturewearer]

They dont tell us anything...lol

[@dancook4993]

Very informative I know just how you feel micro adjustments

[@yourfavoritedenturewearer]

really small micro adjustments...lol

[@denturesmile8143]

I bought a finger nail n toe nail drill kit from Amazon for 10$ it's 4sure a time saver! I am only 8 days post extraction with immediates n I get sore spots n all I do is drill down the area that hurts me n that's that.. such a great thing to have for us denture wearers 👍✌❤ oh and the drill kit came with like 6 or 7 different drill bits.. and it's perfect cuz it's the same bits that acrylic nail salon's have. N my dentures r acrylics. Works great!! Have a great day /night denture fam✌👍❤😁

[@yourfavoritedenturewearer]

right on that is awesome thank you for sharing.

[@teresasanchez756]

My dentist say she cant do anything after final fitting.

[@yourfavoritedenturewearer]

well I think they are wrong because if they do not fit right, they need to be adjusted again.

[@berniceself1412]

thanks bill you're so helpful.

[@yourfavoritedenturewearer]

I am happy the video is helpful for sure.

[@eddiemuise4791]

can i adjust my partial also.

[@yourfavoritedenturewearer]

It would be best to go in and have it adjusted. These dentures were mail order and I didn't have the option of having it professionally done

[@kandacepatterson7965]

Lol I just bought a dremil so I can adjust them. Great vidio

[@yourfavoritedenturewearer]

be very careful, just take the tiniest amount at a time and then wear them for a while. it's takes very little to make an adjustment.

[@kandacepatterson7965]

@@yourfavoritedenturewearer thanks I adjusted today..just need to smooth out and polish. I made my bottom front teeth look very realistic! Carved more of a horse shoe in the bottom.partial. feels good.

[@patindaytona]

I'm going to try and trim down the height of the lower denture teeth. They are too long. Anyone using it for that here? I've been going to Aspen Dental about a year now and the adjustments are so small that i'm tired of of going again and again.

[@yourfavoritedenturewearer]

The teeth are not meant to be trimmed down, I would suggest that if they are not handling things the way you expect that you contact the corporate office and Lodge a complaint. Most if the time they can work with you and come to a satisfactory solution. Just a suggestion because I wouldn't want you to ruin your dentures.

[@patindaytona]

@@yourfavoritedenturewearer It's that their's too much "puffyness" (mouthguard look) under lower lip. When I take them out and straighten my mouth corners somewhat, its more like the way i used to look. I've already had them trim off a large amount there, but I'm now thinking of reducing the curvatures of the front individual teeth to push back that whole front surface. I know even a very small amount could make a significant difference. I realize I'm risking warranty and breakage, but I would spend hours doing this and careful!

[@yourfavoritedenturewearer]

You will never look like you used to look ever. When you had natural teeth they came out if the middle of the gum so your lip laid against the gum. Now the denture covers the gum so it presses the lip out slightly, we all have to get used to our new look its just part of having dentures. Please don't mess up the dentures it will cost you more than you think in the long run.

[@ClairettaAnderson]

@@patindaytona Thanks for sharing about Aspen Dental. I was thinking of going there, but I don't have money to be constantly getting mine adjusted. Not to mention, I no longer have the patience for it.

[@patindaytona]

@@ClairettaAnderson Were you thinking of a new denture or just adjusting your current one? I get my wax impression on Friday. I don't want to get excited because I know from experience the moment you look in mirror while there, can be just a shocking dissapointment. They only are willing to do so much adjustments. It's a 45 min drive each way. Last time it was "see how it goes" and come back in a week or two for more adjustment. Each time the adjustment is not one bit significant to see any difference. Patience...yes I know. After that I just did what i could on my own with dremel tool. It does take the enamal finish off the teeth. Not good, but I can't accept wearing it in public like that. Are you adjusting based on function, or how it looks?

[@Monstermagick]

Lets say you werent adjusting your own but rather someone elses... and as such, failure is no option..... I have a bunch of sandpaper north of 3k grit. have you ever tried using very fine sand paper?

[@yourfavoritedenturewearer]

I found that the tool is more precise in adjustments right where they are needed, but I would personally never adjust anyone else's dentures, it's best if they can go to the dentist for an adjustment, that way if they mess them up they are responsible for replacing them.

[@kandacepatterson7965]

I always use glie even of the fit is good.

[@yourfavoritedenturewearer]

a lot of people do that same thing

[@jeniferschultz1804]

Here it is March 2019, how's them dentures working out

[@yourfavoritedenturewearer]

I love my dentures.

[@user-og7il2wf3w]

@@yourfavoritedenturewearer bill, how did you finally get suction on your top denture. i'm bout ready for RK to just re make mine... i cant get suction on mine.

[@andreahumphries8490]

Where did you get your tools?

[@yourfavoritedenturewearer]

Harbor freight, it came in a kit with everything I needed.

[@katyprice9040]

Just a quick note. My dentist told me that the dental industry got the idea for using an electric filing tool from the nail industry. I was pretty amused by this since I'd attended manicuring school some years ago and I still have my electric nail file machine from my business! If I decide to use Russell's dentures I'd probably do my own adjustments too. I think your dentures look nice! I've watched several videos from others regarding the Russell dentures and most everyone seems to have a slight lisp when they speak...is that normal of most dentures? All my family members that wear dentures don't seem to have this issue though so I'm curious. :)

[@yourfavoritedenturewearer]

well I never really had a lisp either but then again I have always worn the acrylic dentures, I don't wear the RK's for the simple reason that they don't fit correctly and I can't find any one that can work on them around here, the wall's are a little too short, I could wear them with adhesive but I hate adhesive so I just stick with my old acrylic dentures. However I personally have never had a lisp if you watch my first videos from three years ago you will notice I have spoken pretty clear since day one. I guess it just takes a little time for some people to get used to talking with dentures.

[@eddiemuise4791]

where do i buy this tool.

[@yourfavoritedenturewearer]

I got this at harbor freight

[@eddiemuise4791]

@@yourfavoritedenturewearer ok thankyou im in toronto.,

[@Taekwondo2022]

Ok how do you go about getting a set of russel Klein ultra thins, I don’t use Etsy, I’d like to have another set of dentures for a good back up from my comfilytes.

[@yourfavoritedenturewearer]

you don't have to have an etsy account to go on his etsy store and order dentures or email him, that is the only way he does business right now.

[@teresasanchez756]

Im tempted to trim

[@yourfavoritedenturewearer]

well if you do this you must be very careful. I still recommend going to the dentist for an adjustment.

[@williamspence1294]

Also i ate 4 crunchy tacos today with immediates no glue ! My next goal steak at 2 months on july 2

[@yourfavoritedenturewearer]

right on good work

[@Roscoesadie]

Yeah I just paid $2,000 for premium upper and lower and they are worse than my free ones that got from the state 6 years ago...

[@yourfavoritedenturewearer]

Wow. Well I never could get these to work for me.

[@teresasanchez756]

Front Top flinge is high. Its giving me sores.

[@yourfavoritedenturewearer]

sometimes we think they are too high because we are not used to them, but they need to go all the way up into the lip in order to have the suction we need, your lip will stretch a little and it will quit causing that soreness there.

[@dorothywiseman567]

Love your videos....love the way you explain.....man wish I could have seen the work on the top denture...that's where I need to work on...Thanks again for your vids

[@yourfavoritedenturewearer]

Right on glad you liked the video

[@jeniferschultz1804]

They use the same tool's in nail salons

[@yourfavoritedenturewearer]

yes they do.

[@fredsmith313]

Hey bro are you on?

[@yourfavoritedenturewearer]

when you leave a comment I will respond to it. but I don't see the comments coming in live so No I was not on when you left the comment..lol

[@williamspence1294]

Good video

[@yourfavoritedenturewearer]

thank you.

[@weeworld53]

self improvment time yaaaaas

[@yourfavoritedenturewearer]

you have to be very careful doing something like this or you can ruin your denture.

[@stacycruz6953]

Just use fixadent

[@yourfavoritedenturewearer]

I have adhesive

[@Tata-iu3fy]

Stacy Cruz wish fixodent cured sore spots! I’d buy it by the case! He is doing adjustments so that the spot on the denture that is rubbing won’t rub and hurt anymore. 🙂

[@teresasanchez756]

Plz trim mines.😇😇😇i really need it trimmed

[@kathyblessings2u378]

💛

[@needlepullingthread1573]

You really need to dremmel the back palate Bill. I swear to you on all I am. It WILL stop. Even if you shave off a sliver in the back.

[@yourfavoritedenturewearer]

The pallet is not the issue I can promise you that, it's a combination of the top and bottom denture just sitting a little different than my other dentures do. I already have a problem with suction because the pallet is shorter if I take more off I may as well just through them away because they will never get suction then. I promise you it is not the pallet causing the gagging

[@needlepullingthread1573]

Yea Bille, I never got correct suction with my RK UT upper, I had to use powder U TIL I got the DenSureFit to work 🕺🕺🕺

[@yourfavoritedenturewearer]

right I know that the combination of the way the bottom denture sit's different than my acrylic and the way the top moves is what is making me gag. I have to get it to sit right and sit still and then I won't have that issue, but it's a process and it may take a little time to figure it all out...lol

[@needlepullingthread1573]

Right Bill, as soon as I get my ut bottom (should be soon) it should be a game changer for me, because I have the immediate acrylic bottom yet, and the UT upper. Right on pal.

[@yourfavoritedenturewearer]

well remember that the bottom denture can make you gag as well so if you start gagging when you get it don't shave the pallet on the top....lol It will usually happen because the underneath of the tongue back where the last molars are is rubbing the denture in a weird way and that will make you gag as well.

[@stacycruz6953]

A little goes a long way

[@t.o.n.y8864]

How you doing sir before I go any further I just want to let you know I don't mean any a few months ago maybe a little longer anyhow long story short I figured I'd go onto KZbin because KZbin has just about everything so with all that being said I googled how do you adjust your dentures yourself using tools of course. The second video was you talking about pain in your this could have been an error through KZbin or you're riding somebody else's tell. I skipped through this video hoping that you would show me how to adjust my dentures but you didn't I did not give you a thumbs up I didn't give you a thumbs down and did not say anything rude or disrespectful I'm just trying to give you some insight now you're putting out these videos to either help people or make money or both either way it's a beautiful thing. I just didn't get what I wanted all the other videos in betweenwhether I like them or not actually told me and the population Will Rogers looking how to do what it is I'm looking for. I hope that this feedback is helpful and you don't call me all kinds of names and things like that but even if you did because I didn't give you a thumbs up thumbs down or subscribe I wouldn't know if you did so feel free it's on you I hope this helps you the way you tried to help me I guess. Your favorite neighborhood Spider-Man T

[@yourfavoritedenturewearer]

kzbin.info/www/bejne/hHi0Ymuer8-Wgac I believe this was the video you were looking for, I hope you have a great day. I have covered about every subject there is when it comes to wearing and eating and just getting along with dentures in general, and if you watch the next video that comes out next week you will clearly see that I do not do this for the money...lol

[@geminiwill2688]

I'm sorry about your gagging. I would rather have sore than gag. Talk to Russell to see what you can do. Take cake bro.

[@yourfavoritedenturewearer]

I have already talked to him and chose to do my own adjustments once I get them to fit correctly they won't make me gag any more for sure.

[@nenasowath6932]

Good info but 11 minutes to give three minutes of info. Just advise - figure Out what you want to say and then say it rather han just randomly go on and on

[@yourfavoritedenturewearer]

Glad you found the info useful

[@ssloan1463]

Really? Smh.. Thank you for the video. It was perfectly well explained. I didn't think you were rambling.