Derbi Senda Sm 50 Tuning Story. Tässä viimekesän aikana rakenneltu derbi. Unohin monia osia kuvata koko projektista ja joitain lisätä tähän videoon mutta tässä nyt suurin osa
Пікірлер: 89
@RodrigoAmorSuarez-zk9wg14 сағат бұрын
Beautiful derbi, It inspired me a lot for when i start building mine ✌️
@cleanderbi10 сағат бұрын
Means alot to me man!🙏
@svex.1a1989 ай бұрын
Incredible man, i love your motivation, the bike is simply beautiful 😍🙏. Good job 💪
@cleanderbi9 ай бұрын
Thanks alot man😊
@oBancheato5 ай бұрын
Congratulations brother, your derbi is very clean and not toxic in part colours. I have a derbi too and I hope mine, once its finished looks as great as yours.
@oBancheato5 ай бұрын
New sub
@cleanderbi5 ай бұрын
Thats great to hear man! Im sure if you put dedication it will look amazing. Keep up the grind
@uttra4 Жыл бұрын
Komee mopo ja kuski🥰😍
@allup8980 Жыл бұрын
Aisaatana😍
@cleanderbi Жыл бұрын
Kiitos🥰
@Kinamoto9 ай бұрын
Very nice bro!!! I am xurrently also building something out of my moped
@cleanderbi9 ай бұрын
Thats awesome bro!👌👌
@rasko7109 Жыл бұрын
dope bro
@cleanderbi Жыл бұрын
Thanks man appreciate it alot🥰
@rasko7109 Жыл бұрын
@@cleanderbi EMail ? I would like to share a photo of my bike with you
@cleanderbi Жыл бұрын
@@rasko7109 send it on ig direct to me @cleanderbi 👌👌
@AaronPaa-ml6lm Жыл бұрын
Very amazing derbi build👍🖖👌🤟🤏 i hope you dont over wheelie that yes
@rasmusikonen1391 Жыл бұрын
😍😍
@eeverttimlin407311 ай бұрын
ihana dööpi
@cleanderbi11 ай бұрын
Kiitos sinäkin
@2smokes10 ай бұрын
good skills, i buy cheap bikes too, but i flip them +befor making build out of them but i got a hold of a moped for free andi will make a build plus tuning too😆😁. keep it going
@cleanderbi10 ай бұрын
Thanks man! And sometimes flipping bikes is profitable👍👍
@2smokes10 ай бұрын
@@cleanderbi it is profitable if you keep in mind the expenses that ur gona put on it to make it run and sell good so u pay good for your interest and second have it until u fix it and dont atach to it ( atach to ur bike ) but not the one u wana flip
@ali317310 ай бұрын
what a clean build, and that gia exhaust, really fucking beautyful, clean bike bro, keep it up
@cleanderbi10 ай бұрын
Thanks man means alot❤
@user-fg4hi7zo2g6 ай бұрын
You could put some other Brake discs on the Derbi.🤩😊
@cleanderbi6 ай бұрын
I changed rear brake disc couple days ago, it looks alot better. Mayde the front one too someday
@user-fg4hi7zo2g6 ай бұрын
There are a few good brake discs on Gearparts.24🤫👍
@FalconR73 Жыл бұрын
yooyo, how did you paint the clutchcover? U use any primer or just straight to the black spray?
@cleanderbi Жыл бұрын
I did not use primer, sanded it goon so the paint sticks to it better. I recommend using heat proof primer so it does not boil if you use primer
@aaro7314 Жыл бұрын
🏍️🔛🔝😍
@karlkristen27786 ай бұрын
Very nice bro i have a little question how much did you spend on tuning?
@cleanderbi6 ай бұрын
In this video, the total cost is about 1600€ including the moped so tuning about 1400€😅😅
@cpi_goes_braa Жыл бұрын
Wow bro Really nice bike i think i will do it like you blue black😈❤️😈🤝
@cleanderbi Жыл бұрын
Nice bro🥰
@vandazo4 ай бұрын
Where did you buy the bolts and blue levers?
@cleanderbi4 ай бұрын
Aliexpress, China
@user-fg4hi7zo2g6 ай бұрын
One Question🙏, where did you bye this Upsaiddown fork?
@cleanderbi6 ай бұрын
I bought it from a guy that was gonna throw it away, moded it to the derbi and repaired it.
@joeymeijer10868 ай бұрын
Nice build but where is the front brake?
@cleanderbi8 ай бұрын
when I got the new forks, the old brake system did not fit. iI have now gotten a new one and it works.
@xerofx087 ай бұрын
@@cleanderbi Did you get a new brake or new forks? What forks and what brake did you buy?
@cleanderbi7 ай бұрын
@@xerofx08 I got a Paioli usd forks, which are rare nowadays. Then I made an adapter plate and modified an keeway scooter front brake to it😂😂 it was challenging but it works so🤷 it took alot of time tho
@melkerhermansson13935 ай бұрын
what is the grips called that you have on your bike
@cleanderbi5 ай бұрын
They are called Protaper grips blue and black
@doviss.9 ай бұрын
kur pirkote?
@naiki81987 ай бұрын
miten kiillotit ton kytkinkopan?
@cleanderbi7 ай бұрын
Hioin vaa tarpeeks eri papereilla sit huopalaikalla ja kiillotustahnalla kiilto pintaa, sen jälkee suojasin ton kiilltokohan ja maalasin muun kopan mustaks
@Carshorts2k3 ай бұрын
I love this build could you say how much did you spend to revive it back from the dead?
@cleanderbi3 ай бұрын
thanks alot, and this was my first ever project, so I wasted lot of money but I spent around 1500 euros. I could have saved alot if I had experience XD
@brzdax72962 ай бұрын
@@cleanderbii put 7900eur in my 2 fast rieju
@cleanderbi2 ай бұрын
@@brzdax7296 yeah I can imagine that. 2 fast is soooo expensive but everyones dream🤤
@JonneIlmanMankia9 ай бұрын
Käytiks spraymaaleja vai ruiskua toho kytkinkopa ja katteide maalaamisee?
@cleanderbi9 ай бұрын
Kaikki nuo muovi osat on spraymaalil ja sit kytkinkoppa myös mut ne on maalattu hyvil maaleil ja pohjil että kestää.
@JonneIlmanMankia9 ай бұрын
@@cleanderbi ai niiku iha kunno liikkeestä hommatut vai joku 2k motonetist
@cleanderbi9 ай бұрын
@@JonneIlmanMankia nosiis on ne kärkkäiseltä mutta ne eioo ne kaikista halvimmat maalit. Ja sit mokesti maalates tärkeimmät on ne poohjat ja lakka. Sillon pitäs pysyy aika hyvänä maalin👍
@JonneIlmanMankia9 ай бұрын
@@cleanderbi ok kiitti boss 💪
@onedevilhimself Жыл бұрын
what wrap did u use?
@cleanderbi Жыл бұрын
Im not sure its just matt wrap from our local wrap store, its some cheap wrap so not the best but Im sure you can find it :)
@sinper4527 Жыл бұрын
seksikäs ajoneuvo
@derbitleipoo Жыл бұрын
Mite sulla virtalukko kii tuola sivussa
@cleanderbi Жыл бұрын
Paril nippusiteel pumpussa kiinni tuos maskin takana😅
@Laiskinmanki3 ай бұрын
Mikä penkin päällinen
@cleanderbi3 ай бұрын
Kiinasta mtilasin jonku halvan makso vaan 12 euroo mut suht huono laatunen oli ja ostin jo laadukkaamman tilalle
@arttu51958 ай бұрын
Miten sait tollasen kromi reunuksen noihi vanteisiin
@cleanderbi8 ай бұрын
Rälläkällä nätisti hioin sillee että just ja just lähti maalit pois tuo on alumiinia nii ei ala ruostuu mut kanttii olla varovaine ettei ota liikaa materiaalia pois
@oskaritikkanen3951 Жыл бұрын
Millä wräppäsit noi usd keulan jutut'
@cleanderbi Жыл бұрын
Jotain halpaa mattamustaa autoteippiä en muista mistä ostettu
@eemelikankaanpaa820911 ай бұрын
Mistä ostit tota teippiä tai kutistesukkaa noihin haarukoihi
@cleanderbi11 ай бұрын
Se on mattamusta autoteippi mutta en muista mistä ostettu. Tais olla vaan joku halpa teippi jostain kaupasta🤷
@Potro44 ай бұрын
Virittäjän video ollut inspiraationa selvästi hieno mopo
@Jesse_kettu11 ай бұрын
Miten sait ton putken tollee putsattua pitäs itekki saada jos voit kertoa
@cleanderbi11 ай бұрын
Rälläkäs semmonen vihree tyynymäinen laikka joka on fine laatua ja sit sillä vaa oha kokonaa puhtaaks ja huopalaikalla ja kiillotusaineella kunnolla kiiltäväks. Myös oon kiillottanu nuita putkia semmosilla rälläkän kiillotus seteillä kannattaa kokeilla
@elia2594 Жыл бұрын
Alkuperäne derbi oli parempi🙄
@cleanderbi Жыл бұрын
No niin kyllä oli
@homosaatana Жыл бұрын
Tnt tuning😂😂
@cleanderbi Жыл бұрын
Tuli kisasähköt ja porasin tost paskakopast sen homman poisa nii ei oo enää sitä tnt logoo😂😂
@homosaatana Жыл бұрын
Koko koppaa vittuu vaa
@homosaatana Жыл бұрын
Ja enempi yksityiskohtia massa derbi
@cleanderbi Жыл бұрын
@@homosaatana joo ei ollu tarroihin varaa ne tekee sairaan paljo mut ei kyllä ole massa derbi😂😂
@homosaatana Жыл бұрын
@@cleanderbi s6rt tarra rungos ja basic kiiltävä musta
@nuuzkis756 ай бұрын
vitun pähee
@ali31736 ай бұрын
bro which exhaust is that?
@cleanderbi6 ай бұрын
It is a giannelli exhaust for derbi.
@ali31736 ай бұрын
@@cleanderbi is it the old gianelli exhaust? the gias look nothing like your exhaust, you made that exhaust soooo beautiful, could you make a tutorial on how you did it? please make more videos😂
@cleanderbi6 ай бұрын
I really apreciate that man, but I cant make a tutorial... The giannelli exhausts do not look the same as mine, because mine is polished carefully. so a giannelli exhaust, polish it to mirror, then heat the welds so it tkaes the color. Hope that helps you!@@ali3173