Design it with Cineware: Model a Coffee Mug in Cinema 4D

[@josuejeremias6444]

Honestly once explained it's fairly intuitive. Thank you for breaking it down so nicely for us newbies! Can't wait to play with the full version

[@2spoons]

Out standing video of instructions to use on C4D to create a simple every day coffee mug - and I've learnt C4C all over again in one lesson!!! Many thanks

[@megan8794]

I'm passing my 3d modeling class because of these videos! They are so helpful for filling in the gaps of our very outdated textbook.

[@gokhanersan8561]

This is a very clear, cleanly produced tutorial.

[@gsmarif2998]

You deserve youtube award of the year. TNice tutorials video truly nails it! Very well explained... The way you cut the bullsNice tutorialt and get straight to it..

[@CharlesLuppi]

the tone and control of ur voice says "I know my sNice tutorialt!". Good stuff buddy.

[@QamarAbbas-nb2cl]

I am brand new to DAW and soft soft - these tutorials are excellent an very helpful to get soone like up and running. Appreciate

[@sammyera4245]

looking forward to learning from the rest of your videos. Subscribed!

[@denilsonleite7611]

I feel 10x more confident in soft soft, thanks!

[@lamaquteshat92]

WOW amazing!!!!!!!!!!!!!!!

[@flyby6212]

back in and recently got soft soft again, it felt strange and i had previously just taught myself the software. Finding your videos is helping

[@MiguelEspinoza-vm3tb]

Take a week just learning the basics and you will be good, I been using soft soft since it was Fruity Loops back in 03, and still learn

[@laurencegr9978]

Concise and clear. Thank you.

[@faizcurious7407]

Lots of thanks to you,well explained tutorial 👍🏻☺️ Keep uploading,very novice and fantastic tutorial ☺️💐

[@meilin7322]

to! Can’t wait to buy it, and getting startet!

[@jolinaopelinia2327]

thank you for this tutorial now i can make a clean and more accurate models

[@giselavercellino3652]

The image you used is not here for download....

[@reinada7640]

Right ??

[@Waufy]

incroyable, maintenant pas besoin de rester assis pendant des heures

[@dudu311086]

Frrrrr tNice tutorials man just straight forward !

[@GemCristian]

Thank you, I really needed to hear tNice tutorials!!

[@abdelmoghit9496]

Nice tutorial.... Very helpful

[@معرفية]

one of the best of what i have seen thanks alot

[@nancypaolavelascoguevara8088]

You are dope bro! Damn , thank you so much, subbed

[@Ammeeeiizing]

great tutorial!

[@olgapichugina62]

Your lessons are the most correct. Of course you need to learn only from Cineversity.

[@esin-esen]

while you using the bridge tool dont forget the press shift button which is worked for me. otherwise i couldnt do it. thank you so much for the tutorial. it helped a lot.

[@OmarMohamed-nj4ji]

Thank you for creating tNice tutorials playlist in soft soft, just starting out in soft production and there is so much to learn

[@danielyu8808]

Wonderful tutorial! Thank you very much!

[@JubileeCloudJMMC]

have. But, your tutorial was amazing and I have made a semi-decent soft. Thanks!

[@miph00]

such a great tutorial thanks a lot !

[@juliancho031]

Thank you man!

[@MichaelStrawn_I_am]

Thanks!

[@anjuupadhyay4775]

Great teaching rhythm. Cheers. ....

[@nguyenhiep9868]

Thank for sharing!

[@RavArtStudio]

year for all of us, for so- it's still ongoing. i respect you for being honest as that's what's been keeping a bit sane recently, just being

[@ratkoradujkovic1419]

thank you so much ! this helped me alot !! :)

[@RKKLFF]

I see you are a man of culture as well

[@valentin5595]

beginners. Thank you so much! x

[@LilTFT]

thank you so much, your bot is perfect

[@asdasdasd23e]

watch more and learn more your are great thanks.

[@Kapr255]

informative video good sir, Gracias

[@eyed909]

good tutorial, nice pacing. thank u

[@mdabuhassan230]

tNice tutorials is detailed, its amazin thanks man!

[@franziskaurban5224]

thank you for doing my school project :-)

[@renae_kjx]

it was a super long tutorial but it's really good as it's detailed and i can use a lot of thethings i learned to model other stuff

[@AaronBowley]

in a world where there are 8-9+ hour tutorials how the hell is 15 minutes a super long tutorial

[@arsyialleira]

super soft

[@HEYimGraceL]

I can't get the top polygons to extrude inner, there isn't a option for this... why is this and how do I fix it

[@burakgoksucukur3722]

Dude... u give hope

[@moneeralmatri9670]

Great work Thanks a lot.

[@sayiidtama9975]

Thanks for such an informative video! I went from "wtf" to "Wow, I actually made a soft!" in about an hour (I had to keep stopping and

[@over1538]

Nice tutorial. I have been having content issues with my hmdi connected speaker and subwoofer. No soft is coming through, still coming out of

[@lille6935]

habibi isch liebe dich

[@godlgyro5233]

very good tutorial . very clean . i am happy you didn't start digging deep into any specific feature - sotNice tutorialng that happens to too many

[@kzinff6489]

Super teacher

[@nurisafif9932]

Thank you, it helped but i had a little bit of problems. Good Tutorial

[@edisonlujanvicana6765]

and I will find my way back there too!

[@pinkster-kindersonsnoemditkoor]

Thank you so much, please make more tutorials like tNice tutorials. You explain better than any other guide I've seen on youtube, very clear and

[@diogoalmeida3951]

u see that little cog option button on the bottom near the fullscreen button? if u click on that u can chose to slow it down or speed it up. i

[@vansharora1512]

Hey Mike, thanks for the video. I am considering purchasing soft softs for the first ti. Do you have the personal version or the

[@phuongphan2990]

can you do a full tutorial from downloading a free vst till importing into soft soft please?? im new to the interface and software

[@loicdurager5724]

THANK YOU

[@successmantras4342]

Awesome 😊

[@АндрейПочиняев]

Thank you . Otherwise, I didn’t know how to make a jug handle purely from polygons. Did through Bend.

[@filmpertutti7237]

click on the magnet, and from there you can adjust how the tracks snap onto the grid. if you want it to be each 1/4 of a bar, click "line"

[@anti-fame]

4:10 EXTRUDE: If you try to extrude and you lose the 0.5 thickness of the mug, you need to follow the extrude inner instructions and add the 0.5 offset as showed in the video and then click ENTER and now when you select Extrude you need to change the "Offset" to 0 cm.

[@kafiyafs7443]

Thanks to you

[@duduy3181]

Hey, i just wanted to know do i have to learn soft before i use soft soft? Also i wanna learn premiere and after effects.

[@youtubeplusofficial]

Yesssss!!!

[@aryna_kolodnytska7209]

Can you use it to resetup s?

[@reginakharisova2555]

cool! tnx for a good explanation!

[@ueckbueck]

I play with perspective a lot (option+mouse in Mac) and messed up with the perspective ended up having it skewed or distorted too much and can't back to the default perpendicular axis. Do you know a shortcut to fix this?? like pressing S for the frame to the object? Thank you for the lecture!!

[@stzlys]

jpg mug is not in the folder. :/

[@seumomentonerd2517]

Are you using Producer edition?? What do y'all recomnd if I want to make s but not record my voice or tutorial?

[@theviruz8795]

How do u connect ur contentinterface to soft soft so u can record?

[@יסמיןסלם]

once i buy the basic version of soft soft can i upgrade to producer for 100 dollars or do i have to buy it new for 0?

[@mateoalmache5903]

Don't matter how long you take, long as you do it cause you love to

[@bonquva]

is it possible to make a block, then another block and uput it inside the initial block, then remove anything it touches?

[@Karaoke1234nepal]

Thank You For TeacNice tutorialng Us Brother

[@killrblue]

When I added my sylinder it had 4 times the polygons than yours on the sides. Instead of long polygons around like on yours. Why?

[@imonmushfique]

helped a lot. thanks.

[@giuseppegalli9009]

thank you very much .... TOP!

[@fugu_vod]

i got a problem... when i want to click on 2 or more polygones, i can only select one by one, not 2 or more at same time...

[@danielafranzen2078]

The jpg image is not in the folder.

[@interiorssriteja9175]

nice

[@adelincamlan459]

GL bro

[@shoto4897]

Whenever i use the GMS and put it in the soft, it holds out the note forever! please help, i am very confused

[@itz_majd4176]

can anyi]one link the image that hes using

[@gokhanersan8561]

Does Cineversity have a book that would go with the videos-to teach this program from ground up? I know people who are 10-15 years into C4D who are still struggling with it, due to the lack of an “authoritative” software teaching guide. A written and illustrated one.

[@alexfc4593]

Thanks for the tutorial! but I followed ALL the steps, and when I tried to export as FBX, it just won't show the materials nor the SDS, it looks like polygons in the FBX file :( can you help me out?

[@thohuyen3319]

year. I want to get into making soft on desktop because it offers more features but I have just been preferring the softow of mobile apps

[@lightbringer3672]

you the best

[@ASESAN]

Please help! my loop cut button not showing and the short cuts not working too. HELP!

[@fitimshehu4730]

it should be Cinema 4d r18 and above to have loopcut

[@saminakhousir6019]

track, but the problem is I don't know how to do tNice tutorials, it only goes to the setuper as the whole track...can you help with tNice tutorials?

[@momentofpeace7259]

mobile or desktop

[@cinemazione5847]

Where can i find the image you use in the video?

[@shinepradhui]

that’s deadass rn

[@Vlbhk91]

I can't have loop or path cut, maybe too long for 2014?

[@covid-20_pro_max88]

i can't find extrude inner! pls help me

[@jadesmith8106]

In my attempt several things went wrong. The loops I cut were not evenly spaced which caused my 2nd set of handle extrudes' inner edge no longer connected to the outer edge of the 1st set. One was too low and the other too high. Also I made the handle on the wrong place, which I could have avoided if the reference image would have been visible in the 3d view. I just wonder if it would have been better to create a 2nd 3d object: a donut, moved that into the cyllinder, fused it together and then extrude a top inner circle down.

[@mimlaboni11]

you will change your option panel

[@Cafest]

I'm too busy reading these comnts and not paying attention again.....and I'm Nice tutorialgh