👌 Designing Professional Monograms in Lightburn!

[@gener8fun]

in 6 minutes and 58 seconds you taught me something I have been struggling with for hours...much appreciated!

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@cashinfluenced3650]

I come to light burn college every day, learning something new every class! I’m gonna try this with the multi layer cross hatch method you taught…. Thanks again professor!

[@TheLouisianaHobbyGuy]

Sounds great!

[@ALXSHARPEN]

Thank you Rich you are one of the very best on KZbin for teaching LB you have made me go from hating LightBurn to loving it!

[@TheLouisianaHobbyGuy]

Wow! Thank you so much! I appreciate the comment!

[@JimBroad-s8u]

Just want to say I am a 72 year old that LOVES tech. I ran across laguy by accident and real glad I did. this comming Friday I will have my Twotrees TTS-20 Pro Engraver . But have learned a lot so far and really wating to learn. I have had a laser and had to return it so I ordered it hope to show off something. A great big thanks

[@TheLouisianaHobbyGuy]

Welcome to the obsession Jim!

[@TheLouisianaHobbyGuy]

If you're wondering how I finish the slate, I use Shellac. It has the nicest shine and lasts a very long time! Shop my Amazon Store for focused laser products! www.amazon.com/shop/thelouisianahobbyguy

[@ericawilliams1954]

Thanks for the step by step and going at a pace where a person who has no knowlege of the software can keep up. To do the slate coasters what is the best settings, I have a 10w laser by X tool

[@TheLouisianaHobbyGuy]

Best settings are achieved by doing a test grid Erica.

[@ursulaford4885]

Very good pace at which he dies the videos and explains it well. 👌

[@timrimes6910]

I am brand new to laser world, Just received my Thunder Laser last week. I have watched a ton of KZbin videos to get up to speed on Lightburn. Your videos are top notch. Thanks for taking time to explain the details of Lightburn the way you do.

[@TheLouisianaHobbyGuy]

Welcome aboard! Glad to help!

[@robertbutler795]

Thanks

[@TheLouisianaHobbyGuy]

Thanks Robert! And thanks so much for the support! 👍

[@Pattytwins]

Greetings from Amsterdam!! Thank you very much for this video. Very helpfull!

[@TheLouisianaHobbyGuy]

Thank you so much Patty! I really appreciate it! 👍

[@SuperKaycampbell]

Wow I love the last one. What would you have to do to cut that circle out and the rest engraved?

[@TheLouisianaHobbyGuy]

Put the circle on a different layer in line mode and set the speed and power to cut Kay.

[@dereksummers8598]

I didn’t search this video but I needed it. LONGEST video I’ve ever watched and well worth it. Thanks. Subbed

[@TheLouisianaHobbyGuy]

Thanks for the sub Derek! Yeah I tend to take a long time to make a point 🤪

[@ursulaford4885]

@@TheLouisianaHobbyGuy I don't think u take a long time to make a point, but rather that u make sure anyone can understand how to do it and why.... I appreciate that I'm also new to lightburn and laser engraving

[@thomaskuzia8125]

"old tech non-savvy beginners",,, boy do I fit in that category Rich! You're my go-to guy and even though I'm not progressed very far I wouldn't be where I am without you! This is a great video when you solve a lot of mysteries! Thanks for doing all of you do for all of us! Tom

[@TheLouisianaHobbyGuy]

I appreciate that Tom! Thank you! 👍

[@woodworkergene5416]

Thank you for all that you do to help us.

[@TheLouisianaHobbyGuy]

My pleasure!

[@JZee49]

That was amazing to see what can be done just using a coaster and light burn. What an eye opener you have opened up a whole world of possibilities. As always thank you so much for what you do.

[@TheLouisianaHobbyGuy]

Glad you enjoyed it John! 👍

[@rad23ref]

Thank you very much for your instruction. BRAND NEW to laser engraving and Lightburn. By Far your videos are the most helpful. Joined a Facebook group and the very first question I asked, I got chastised beyond belief. Again Thank you Thank you.

[@TheLouisianaHobbyGuy]

That won't happen in my Facebook group: facebook.com/groups/lightburnsoftware We have over 37,000 helpful members.

[@sameverett9871]

Thanks!

[@TheLouisianaHobbyGuy]

You bet Sam! Thanks for the support!

[@UCanDoIt2Mike]

Thanks for sharing. Nicely done!

[@TheLouisianaHobbyGuy]

Glad you enjoyed it!

[@antoniocruz213]

Thank you very much for sharing all your knowledge. I've just started in the exciting world of lasers, and your videos have been extraordinary for my learning

[@TheLouisianaHobbyGuy]

Great to hear it Antonio!

[@Crewman2770]

Instructional as always but no gobbledygook. Well presented. 👍🇬🇧👍

[@TheLouisianaHobbyGuy]

Thank you Sir!

[@ursulaford4885]

Thank u Rich that was very insightful. Can u pleasedo a video where letters are cut out or contoured example Mr & Mrs Adams for decor at the main table

[@TheLouisianaHobbyGuy]

I have a lot on the schedule right now Ursula.

[@ursulaford4885]

@@TheLouisianaHobbyGuy I understand. Thank u Rich your tutorials are always very helpful 🌹👌

[@kathywidmer1439]

You make it look simple 😳 but not simple for the old non tech savvy beginner!😅

[@jeffauspelmyer2035]

It'll get easier the more you do it

[@JZee49]

I second that initial comment

[@TheLouisianaHobbyGuy]

Follow along Kathy!

[@kathywidmer1439]

@@TheLouisianaHobbyGuy oh i am! And i do learn a lot from you over any other videos

[@patnelson5436]

You do a great job with instruction. Really enjoy your program

[@TheLouisianaHobbyGuy]

Thank you Pat!

[@edwardjamespaed1768]

Hey Rich!!! This is easy to understand. You are awesome. Much love from Philippines🇵🇭

[@TheLouisianaHobbyGuy]

Glad you think so Edward!

[@KenSpock]

Fantastic job again explaining and showing all the steps needed to achieve great results. I appreciate the time you spend doing these “how to”vids especially for newbies like myself. Thank you

[@TheLouisianaHobbyGuy]

Glad it was helpful Ken!

[@craigdille8295]

Thanks Rich. Will put it into practice my lesson for the day.

[@TheLouisianaHobbyGuy]

Go for it!

[@frostcustomwoodworks]

Thanks for the video’s new here trying to move away from my cabinet shop and getting older and cabinets aren’t getting any lighter just don’t know where to start

[@TheLouisianaHobbyGuy]

You can do it!

[@greggarman7343]

I was actually able to create this very effect on my own, but when I was done, I had no idea what it was I had done to get the effect I was shooting for. So basically, I accidently stumbled onto it. Unfortunately, in further attempts, I was unable to recreate the desired effect. Thank you so much for making this video. Now I can recreate this effect at will. Thaaaaaannnnnk You!

[@TheLouisianaHobbyGuy]

My pleasure Greg! That makes me so happy that you can recreate it! 👍

[@ursulaford4885]

That is so crazy when try this and that then get it right and u dunno what u did 😂😂

[@nicholasscaffetta896]

Thank you for your tutorials. Very clear and easy to understand and very helpful for a newby laser user.

[@TheLouisianaHobbyGuy]

Glad it was helpful Nicholas!

[@peggycasey2265]

Thank you for making it easier, I started with vinyl using Inkscape. Lightburn is much easier or maybe it’s your videos that make it easier to learn.

[@TheLouisianaHobbyGuy]

You're welcome Peggy 😊 Pretty sure it's the software!

[@russ4519]

It's the software.. also Rich is a very good teacher

[@jeffauspelmyer2035]

Been doing it on coasters. Have big order for a wedding

[@TheLouisianaHobbyGuy]

The big orders are the best Jeff!

[@shawndebow2285]

Is there any way to make a recess/pocket in the capital letter so that the offset of the spelled out name will fit into it (going for a stacked layers)? I am trying to figure out how to do this without burning the offset portion that isn't part of the capital letter. By the way I just got my laser and your videos have been a great help with learning how to use it, so thank you for that.

[@TheLouisianaHobbyGuy]

Too hard to answer in a KZbin comment, sorry.

[@shawndebow2285]

@@TheLouisianaHobbyGuy Thank you for replying, I know it would be difficult. I figured it out. Thanks again for the reply, you are an excellent source for the newbies.

[@brooklynbound75]

Absolutely enjoy your videos. I've learned so much from watching in the last couple days. Very much appreciated keep em coming. Sending anyone who will listen your way.

[@TheLouisianaHobbyGuy]

Great to hear! Thanks so much!

[@simonwiltshire8941]

Easy to understand,straight to point,what more can we ask for well done sir enjoying your video keep up the good work.

[@TheLouisianaHobbyGuy]

Much appreciated Simon! 👍

[@williamhamilton5986]

Hi Richard I have learned a considerable amount from your videos, thank you for your time. One question I have in regards to this video. Once you place the box over the large text/letter and use the boolean assistance it appears that you can't select that letter and change it. Unless I'm doing something wrong, it appears you have to create 26 of these, one for each letter. Again thanks for your guidance. Bill

[@TheLouisianaHobbyGuy]

I'm only working with one letter at a time.

[@Jer0867]

My first time on this channel, and this video was SO informative and useful! Excellently presented, and easy to understand, which is important for relative newcomers like myself. I will definitely get some use from this tutorial, as I can see the possibilities it could open up for me. I have subscribed right away, so that I can see what else is on offer!

[@TheLouisianaHobbyGuy]

Glad it was helpful!

[@PawPawsWorkShop]

Excellent job on this video. You had many excellent points.

[@TheLouisianaHobbyGuy]

Thank you Sir! 👍

[@georgechambers3197]

Great tutorial Rich. I haven't tried selling monogrammed coasters yet though I have sold a bunch with business logos on them. I guess it's time to try and sell some different coasters. Thanks for the video!

[@TheLouisianaHobbyGuy]

Go for it George!

[@justcarverob9389]

Another awesome video I am learning so much now I just have to try it out after I watch this video a few more times thanks stay awesome

[@TheLouisianaHobbyGuy]

You can do it!

[@waterlilly62lori]

How do you know where do place your image on the workspace to be burned?

[@TheLouisianaHobbyGuy]

Watch my Lightburn College playlist.

[@forzacruza209]

Another brilliant teaching video! I keep looking back at your videos and learn something new every time. Thankyou.

[@TheLouisianaHobbyGuy]

Very welcome!

[@barillashector3360]

do you have a video where you show how to cut these monograms by chance? I am new to this and I don't know how to cut wood with the laser yet, trying to find information about it, but I can't find any video. I would like to know what settings the set

[@TheLouisianaHobbyGuy]

You run a test card to get your settings on the material you're going to use.

[@sergeikolesnikov6596]

Thank YOU very match for your videos! you are the best teacher online! God Bless You !

[@TheLouisianaHobbyGuy]

You are very welcome Sergei! Thank you!

[@aburk8417]

Thank you!!! New to Lightburn...and learning a lot 👍

[@TheLouisianaHobbyGuy]

Glad to help!

[@georgerandolph3848]

Tried several times to follow your steps but after adding the circle my preview in fill mode is totally black - please help

[@TheLouisianaHobbyGuy]

I can't tell you any better than I showed in the video George.

[@hefalump56]

Another great video, very inspirational. With wooden products, is grain direction something to be considered? I am thinking about the durability of items that have holes near the edges, that aren't made in plywood.

[@TheLouisianaHobbyGuy]

Yes, absolutely, I almost always have the grain vertical.

[@hefalump56]

@@TheLouisianaHobbyGuy thank you.

[@waterlilly62lori]

Does the bullseye icon center the images?

[@TheLouisianaHobbyGuy]

Bullseye centers one item onto another.

[@mullena101]

Great video! Another popular monogram design is to do a knockout offset of the names in the middle by deleting the offset. Do you happen to have a source to share for slate coasters?

[@TheLouisianaHobbyGuy]

Thanks for the tip! I'll try that!

[@hellreaper2021]

Hey rich im just about to get myself a sculpfun s9 and was wondering what settings i should have set, like should i have the mm/min inches/min or inches/mm/min. Any help would be appreciated and thanks for all the tutorials on all the videos its been a big help :)

[@TheLouisianaHobbyGuy]

That's completely up to you. mm/min is the standard for diode lasers.

[@LarryDMitchell]

Great job Rich. I learned so much during this video. Thx

[@TheLouisianaHobbyGuy]

Glad it was helpful Larry!

[@geef0813]

This may be my favorite video yet! Thanks!!

[@TheLouisianaHobbyGuy]

Wow, thanks! 👍

[@mpa568]

10th time i watch this. You are amazing!

[@TheLouisianaHobbyGuy]

Wow, thank you! Sometimes I go back and watch it myself 🤪

[@mpa568]

@TheLouisianaHobbyGuy I would believe this, If you where as noob as myself. 😋 People are always amazed when they get a personalized gift with their Name in such a Form in it. Really a great lesson from you and so much to learn in your Videos. Thx again 👍

[@dafyddgould9485]

HI, i have been trying to do these on slate, but the burn is black with a white outline, someone said to put the txt to negative but cant see where to do that as i thought thats for images, i clicked bitmap and now its greyscale which seemed to work, any help would be greta

[@TheLouisianaHobbyGuy]

Offset the layer to change the text. Go to 9:00 to see how I inverted the text.

[@TomasQ]

Perfect timing. Just received my boxes with 500 slate coasters.

[@mullena101]

Where do you get your coasters from?

[@JZee49]

Would like to know as well. Ordered some from Michaels and the edge was so bad that I bet over 50% were unusable due to not enough flat surface to engrave.

[@TheLouisianaHobbyGuy]

Have fun with it Thomas!

[@TheLouisianaHobbyGuy]

Did you call then John? I just got 2 cases and they were perfect.

[@JZee49]

@@TheLouisianaHobbyGuy I didn’t I tried to use a few so I didn’t want to complain.

[@tu0r142]

Hi Rich.. I am trying, to recreate your stunning work, by following the video step by step. But.... When you switch mode on the cuts and layer tab, it changes what we see on the workspace.. Is there a setting for that, somewhere ? I have to go to the preview icon, to see what is happening.. It looks so easy, when you do it.. Keep the videos coming - they are superb... Cheers from Denmark..

[@tu0r142]

Hi Rich.. It's me again... 🙂 I just saw a video you made about one year ago, a FAQ, on lightburn... There you very precisely describe my problem, and how to resolve it... So thank you again, for the brilliant videos... Keep then coming..

[@TheLouisianaHobbyGuy]

Great! Glad you found it!

[@waterlilly62lori]

How do you center the word MARTIN?

[@TheLouisianaHobbyGuy]

Select the word, hold shift and select the item you want to center it on, and click on the bullseye icon.

[@TTC1940]

Just the second day of owning a laser, my 1st. Ortuo master pro 3. Have watch this video to help with a MAJOR learning curve. Have not been able to figure how to make the 2 horizontal bars about and below the name MARTIN. Can you send me somewhere to get some help? Also when you have the finished design and saved, can the layout be changed to a different initial without have to start from scratch? Tanks ahead of time!!

[@TheLouisianaHobbyGuy]

Sure, head on over to my free Forum and you'll get all the help you need! lahobbyguy.com/bb/

[@mikethompson9745]

so I just today got lightburn I am using an Atomstak A5 Pro+ on problem is the software power in lightburn gos unlimited and in Atomstack its showing S max at 1000 or less i am having trouble getting it as black as I could in laserGRBL any ideas?

[@TheLouisianaHobbyGuy]

No, the S-Value Max is simply telling the laser to output 100% if it is set to 1000. The difference in the burn is some other cause. They both use the same Gcode.

[@russwhitworth5820]

I really enjoy your videos I have a question I finally got lightburn to see xtool d1 5watt I was able to move laser module with mouse by pointing to different spots in work window then I was gonna try and engrave one of your monograms I put it in work window framed it several times till I got everything lined out so I hit play and it went to start point and nothing then I couldn’t get it to do anything

[@TheLouisianaHobbyGuy]

xTool is filled with bugs Russ, you'll have to contact their support... good luck with that 🤪 since it's virtually non-existent.

[@ronsone8373]

Can you do a multi layer design tutorial? Like that 8 layer cross for example

[@TheLouisianaHobbyGuy]

I have one on my list, but definitely not the cross. That would be a 40 hour video! 🤪

[@Swjmoderncreations]

I just got lightburn I really am hoping you can give me some advice. I am trying to make three circle offset but then cut the middle two sides out. any advice please

[@TheLouisianaHobbyGuy]

Put the circle you want to cut on another layer and set it to line, and then set your speed and power Wendy.

[@Challan666]

Thank you 🙏 you are fantastic, soon I will have guts enough to try 😊

[@TheLouisianaHobbyGuy]

You got this Charlotte!

[@georgelawrence9]

Simple and informative easytofollow - Thx!!

[@TheLouisianaHobbyGuy]

Glad it was helpful!

[@tinarichardson8085]

How do I get bullion assistance to work-mine is dimmed (not available)

[@TheLouisianaHobbyGuy]

It is only available when two objects are selected Tina.

[@andretemerario9782]

Thank you for this incredible lesson :)

[@TheLouisianaHobbyGuy]

My pleasure Andre!

[@jean-lucbulteel8162]

Du bist der Beste Ganz lieben Dank und liebe Grüße aus Deutschland Jean-Luc

[@TheLouisianaHobbyGuy]

Thanks Jean-Luc, glad you enjoyed it!

[@zovi8514]

Man, you're such a GREAT inspiration for us, TY SO MUCH for your big help, WE NEED YOU !!

[@TheLouisianaHobbyGuy]

I appreciate that, thank you!

[@davidelder5399]

Greetings from the UK, loving the channel I so need a Co2 laser

[@TheLouisianaHobbyGuy]

Welcome aboard David! Everyone needs a Co2! 😎

[@laarmanj]

Thanks for your information. I can"t wait for more.

[@TheLouisianaHobbyGuy]

More every week!

[@andrewhughes7382]

Thanks Rich. Your Videos are great and very informative

[@TheLouisianaHobbyGuy]

My pleasure Andrew!

[@gilbertboyer9936]

Hi Richard, many thanks for your incredible video tutorials. Totally awesome.

[@TheLouisianaHobbyGuy]

Glad you like them Gilbert!

[@davidwest7622]

Tried a few times to register on your website with no luck, I fill the registration form out but never receive a email..........

[@TheLouisianaHobbyGuy]

The mail server has been fixed. Email me and I'll activate the account. [e-mail]

[@RobSandstromDesigns]

Another good video. I know comments help with the engagement so just wanted to give you a comment that demonstrated appreciation.

[@TheLouisianaHobbyGuy]

Thanks for that!

[@brentkelley9560]

This was great! I learned a ton. I’ve been doing things the hard way. This will definitely help.

[@TheLouisianaHobbyGuy]

Glad it was helpful Brent!

[@randalhaferkamp]

very much enjoyed this one Rich

[@TheLouisianaHobbyGuy]

Glad you liked it Randal!

[@RichEmeryWoodworks]

Your videos are awesome! Very easy to understand and follow along. Thank you!

[@TheLouisianaHobbyGuy]

You're very welcome Rich!

[@IanFlyinGremlinRCNZ]

Well that was a great learning fun video, ok it took me over an hour to watch the whole thing as I was following you step by step (and making a few boo boos) but one I saw where I went wrong it was so easy, Towards the end when you were saying about the squares and welding them for different shapes. I tried that and then threw a pic in the middle and it came out great, I have saved it and that will be a run of coasters when I get my laser sorted.

[@TheLouisianaHobbyGuy]

I saw that pic you sent me! It came out awesome Ian!

[@ronholmgren6615]

Thanks again for your very well done videos. I feel like I have enrolled in a design class

[@TheLouisianaHobbyGuy]

Awesome Ron! Thanks! 👍

[@sic-madeairbrushing76]

How you doing bro? Thanks for the videos. Question on the using the Boolean Assistance. First let me tell you what I’m trying to do. I use 10 mil Duralar clear film to cut stencils out for Airbrushing on T-shirts. So I create bridge in images or even text so certain pieces of the image or text stay together, most when I’m cutting for the positive part of the image. Sometimes i can use the Boolean Assistance and sometimes I can’t, mostly when I am doing letters and making bridges on them. What would be the fastest way to make these bridges? Also, the weld tool and Boolean assistance won’t be lit up when i want to use them. Just a big headache bro, I watch all your videos and everything seems to flow for you, but not for me lol. I would really appreciate your feedback bro. Thank you.

[@TheLouisianaHobbyGuy]

The item(s) has to be ungrouped to use this feature, and some others, and you can only do 2 items at any one time.

[@raysalter6456]

Thank you so much, onto the next video😄😄😄😄🙏🙏 number 10

[@TheLouisianaHobbyGuy]

Thank you so much! I really appreciate the support! 👍

[@ChrisPeters1]

I have learned so much from your videos, that's why I was more than happy to send a donation. Keep up the fantastic work.

[@TheLouisianaHobbyGuy]

Much appreciated Chris, I appreciate the support! 👍

[@andyanand9459]

You're a Star. Thank you for the Tutorial

[@TheLouisianaHobbyGuy]

Glad it helped!

[@jm1964jmir]

´Buenos días desde España, muy buena explicación, cosa que desconocía para algún proyecto que quera hacer con mi laser. un abrazo

[@TheLouisianaHobbyGuy]

¡Mi placer! Gracias por ver y el comentario!

[@dgamble45]

Hi Rich I am learning so much from you and thanks for that, also I have been trying to sign up on the forums but cant send to get the confirmation email to finish the setup thanks in advance.

[@TheLouisianaHobbyGuy]

It's fixed now, so just send me an email and I'll activate it for you. [e-mail]

[@floridalove]

Thank you Rich, for once again, very good explanation.

[@TheLouisianaHobbyGuy]

Very welcome Jürgen!

[@merrillalbury8214]

Great ideas to build on.

[@TheLouisianaHobbyGuy]

Glad you think so!

[@onsapplikasies8620]

Many thanks for your incredible video tutorials

[@TheLouisianaHobbyGuy]

Thank you so much! I really appreciate the support! 👍

[@l.m.1255]

This is so much fun to watch!

[@TheLouisianaHobbyGuy]

My pleasure!

[@andretemerario9782]

Hello my friend, I watched your video early in the morning and decided to try this incredible class. It is perfect. I made it with my name and the names of my seven dogs..lol.. :) thank you very much.

[@TheLouisianaHobbyGuy]

I'm so happy to hear that Andre!

[@squidskunk]

in the cnc world its called stacked text.

[@TheLouisianaHobbyGuy]

Awesome... now if only I can remember that! 🤪

[@robertamber56]

excellent video can't wait to get started

[@TheLouisianaHobbyGuy]

Awesome, have fun! 👍

[@georgeknight1645]

Another great video Rich thank you 👍

[@TheLouisianaHobbyGuy]

Glad you enjoyed it George!

[@thomasstocks702]

Outstanding tutorial! Love it!

[@TheLouisianaHobbyGuy]

Thanks so much Thomas!

[@sherryleggett1612]

So why don’t you do marketplace now?

[@TheLouisianaHobbyGuy]

No Sherry, I stopped doing all sales except for one art gallery and a few long time special clients. The gallery is closing this month so I won't be doing that anymore either. I'm getting too old to work so much in my retirement and I need to spend more time with the family.

[@medina3420]

You should Slant the name on the letter. Wish I could tell you live, lol Owell, You have inspired me with so many Ideas. I want to watch ALL of your vids. Just So Many! few everyday.

[@TheLouisianaHobbyGuy]

Do it any way you want Jason! This is just a design tutorial.

[@medina3420]

@The Louisiana Hobby Guy Yes sir I know, JUST got my laser in Yesterday, Burned anything that would fit. lol Zero Ideas on where to begin starting with speed and power on each material, Wish there was a place, that showed 10 watt laser, basswood start with xxxx/xx% and adjust accordingly. Leather start .... u get the pic. I got the Longer ray 5 10 w. But having fun. Tried for a Christmas gift. lol 😆 Guess I'm buying a gift last min. Next year maybe 👍🏻

[@TheLouisianaHobbyGuy]

Here ya go Jason: kzbin.info/www/bejne/iJqpe5yCec9siNU

[@michaellarson7194]

Thanks for my daily lesson.

[@TheLouisianaHobbyGuy]

My pleasure Michael! Glad you enjoyed it!

[@stuartmccreadie501]

Thanks another great video from TLHG

[@TheLouisianaHobbyGuy]

Glad you enjoyed it Stuart!

[@FredGCopping]

Great ideas!

[@TheLouisianaHobbyGuy]

Thanks so much Fred!

[@merrillalbury8214]

With Williams why not just make it negative

[@TheLouisianaHobbyGuy]

You can do it any way you wish Merrill!

[@ClintonCaraway-CNC]

Fantastic topic!!

[@TheLouisianaHobbyGuy]

Glad you enjoyed it!

[@ClintonCaraway-CNC]

@@TheLouisianaHobbyGuy I've been following your channel for quite a while. I'm REALLY stoked that you got a co2 very similar to one I just purchased. You really are a fantastic teacher and I really learn a lot from your channel.

[@TheLouisianaHobbyGuy]

@@ClintonCaraway-CNC Awesome! Thank you. Co2 videos coming soon!

[@mrob5278]

You are amazing. Thank you!!

[@TheLouisianaHobbyGuy]

Happy to help!